Results 1 to 6 of 6
  1. #1
    AR Newbie Registered Member
    Join Date
    Jun 2005
    Posts
    1

    Question Yamaha RX-V650 monitor connection - please help!

    I have a new Yamaha RX-650 receiver and have connected a Panasonic projector via the 'monitor out' component video jacks on the receiver. (and yes I am using component video cable).

    I cannot get a signal to the monitor / projector. The projector does not seem to 'see' that it is connected to the receiver. I believe the problem is with the receiver (hopefully a setting rather than a defect). The reason I say this is because when I cycle through the OSD (on screen display) settings on the receiver, I see only 'display off' instead of cycling through 'full display', 'short display', and 'display off'.

    Can anyone help????

  2. #2
    Forum Regular PAT.P's Avatar
    Join Date
    Oct 2004
    Location
    ont ,canada
    Posts
    1,096

    Lightbulb Yamaha

    Quote Originally Posted by Phi496
    I have a new Yamaha RX-650 receiver and have connected a Panasonic projector via the 'monitor out' component video jacks on the receiver. (and yes I am using component video cable).

    I cannot get a signal to the monitor / projector. The projector does not seem to 'see' that it is connected to the receiver. I believe the problem is with the receiver (hopefully a setting rather than a defect). The reason I say this is because when I cycle through the OSD (on screen display) settings on the receiver, I see only 'display off' instead of cycling through 'full display', 'short display', and 'display off'.

    Can anyone help????
    Hi Phi496 Im just bought the Yamaha HTR 5760 and having the same problem with the OSD to my tv monitor ,there must be somebody out there with answer to our problem?For know I do all the set up by the receiver window ,works fine but would like to see the complete picture (one of the reason why I bought it ) .Read the manual but was no help at all .ANY ONE OUT THERE COULD SOLVE THIS MISTERY? PAT.P

  3. #3
    Forum Regular
    Join Date
    Jan 2004
    Posts
    122
    I'm not certain of the reason, but on may receivers the OSD is not available through the component video output. For setup using OSD you'll need to use an s-video connection.

  4. #4
    Forum Regular PAT.P's Avatar
    Join Date
    Oct 2004
    Location
    ont ,canada
    Posts
    1,096

    Lightbulb Yamaha

    Quote Originally Posted by kfalls
    I'm not certain of the reason, but on may receivers the OSD is not available through the component video output. For setup using OSD you'll need to use an s-video connection.
    HI KFALLS On what output do I connect the S-Video ,can you tell me step by step to hook it up and what I would do to sent signal to the monitor (remote control) Thank You. Pat.P

  5. #5
    Forum Regular PAT.P's Avatar
    Join Date
    Oct 2004
    Location
    ont ,canada
    Posts
    1,096

    Lightbulb Yamaha

    Quote Originally Posted by kfalls
    I'm not certain of the reason, but on may receivers the OSD is not available through the component video output. For setup using OSD you'll need to use an s-video connection.
    Kfalls Thanks figure it out ,put S-Video to monitor out of receiver to my tv monitor 2 input without taking my component connection off and it works on screen . Thanks Pat. P

  6. #6
    Forum Regular
    Join Date
    Feb 2003
    Location
    RI
    Posts
    39

    Needs to be activated

    You need to go into your menu and activate the CMPNT OSD. You also should make sure that the VIDEO UP CONVERSION is set to ON. As far as the display is concerned, it cycles through like so; always on, auto turn off, and off.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 31
    Last Post: 05-23-2005, 07:57 PM
  2. Replies: 0
    Last Post: 03-01-2005, 07:49 PM
  3. Denon 1602 vs. Yamaha RX-V440 ?
    By RandyClark in forum Home Theater/Video
    Replies: 8
    Last Post: 01-18-2005, 03:30 PM
  4. DVD Players (Yamaha vs Denon )
    By dmz19 in forum Home Theater/Video
    Replies: 1
    Last Post: 09-30-2004, 09:27 AM
  5. Problems with digital input to Yamaha RX-V1300
    By PmR in forum Home Theater/Video
    Replies: 2
    Last Post: 02-07-2004, 08:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •