-
Does anyone else run there HT sans center speaker?
I have been running my HT without a center speaker for some time. I've been pleased with it, but then something happened that really made me appreciate this configuration even more, which was:
-- I was watching "The king and I" with my family on Saturday night, and I had just put back all the equipment on my new rear cabinets/counter top. During this process I had swapped the left and right inputs from my DVD/CD player.
-- This then caused: when people were on the left side of the screen there voice came out of the right side of the speaker and vis a versa.
-- I also have a 106 inch screen, so I can really hear and see when the sound does not follow the actors.
-- So with a center speaker you loose that positional sense which I think adds a lot.
So, does anyone else do this?
Best Regards,
Stan
-
My guess is if voices are coming from the right then most of the voices will not come out of the center but from the right speaker, which means that you won't loose any positonal sense. It only makes sense. I think center speakers should be used if you have the option of doing so.
-
Many, many moons ago, when I first put together my HT system, yes, I went sans center speaker. I had no choice, really, since the timbre-matched center for my speakers was $1,200 at the time, well outside my budget. I eventually found it for much cheaper used, and I'm so glad that I did. Wouldn't dream of using the HT without a center speaker at this point.
-
Quote:
Originally Posted by manlystanley
I have been running my HT without a center speaker for some time. I've been pleased with it, but then something happened that really made me appreciate this configuration even more, which was:
-- I was watching "The king and I" with my family on Saturday night, and I had just put back all the equipment on my new rear cabinets/counter top. During this process I had swapped the left and right inputs from my DVD/CD player.
-- This then caused: when people were on the left side of the screen there voice came out of the right side of the speaker and vis a versa.
-- I also have a 106 inch screen, so I can really hear and see when the sound does not follow the actors.
-- So with a center speaker you loose that positional sense which I think adds a lot.
So, does anyone else do this?
Best Regards,
Stan
I think running any movie without a dedicated channel is a bad idea, especially with a 106" screen. When we mix soundtracks, you have to balance all of the individual elements with dialog taking precedence. We mix for clarity, which is why you will find few things mixed into the center channel in the presence of dialog. When you move that dialog into two very active channels (the left and right front channel), that balance is disturbed by an electrical and acoustical signal reduction of 3db. When sound effects are eminating from those channels along with dialog, the dialog will be swamped and become very difficult to hear. On a screen as wide as yours, this effect will be worsened by the distance between the left and right speakers.
Viewers that sit off axis of the center will not hear the dialog from screen in its rightful place, at the center of the screen. A phanton center image only works for a person sitting equi-distant from the front left and right mains. Once that person moves off axis left or right of center, the dialog will move as well. So instead of the dialog coming from the center of the screen, it will come from the speaker located closest to your off axis position. That is not what the director or the dialog re-recording mixer had in mind.
-
Stan, without reading any replies, I have to say I don't understand how you could not run the centre. I'm not a genius of H/T and my set up is limited. However, my impression of proper DTS and Dolby is that most sound comes out of the center. That being most conversation, etc. The rears are reserved for ambient and environmental sounds.
Does your system have a way of compensating without the center? My thought is that you would just lose all of this important audio with it disconnected. My H/T sounds so good with the traditional 5.1 and coax input, I wouldn't dream of messing with it. Why I was just watching Invisible Target last night, the explosions sounded so real. Footsteps and raindrops were subtley conveyed just as well.
-
Quote:
Originally Posted by poppachubby
Does your system have a way of compensating without the center? My thought is that you would just lose all of this important audio with it disconnected. My H/T sounds so good with the traditional 5.1 and coax input, I wouldn't dream of messing with it. Why I was just watching Invisible Target last night, the explosions sounded so real. Footsteps and raindrops were subtley conveyed just as well.
Yes, you can choose to have the center sound rerouted to the L & R channels by setting the center speaker to 'off' on the AVR.
-
Quote:
Originally Posted by audio amateur
Yes, you can choose to have the center sound rerouted to the L & R channels by setting the center speaker to 'off' on the AVR.
Huh. I had no idea, well more power to ya Stan.
-
-
Quote:
Originally Posted by audio amateur
It's Tony...
Hahahah, nice but Stan is the OP's name. You are Tony, let's get this right.
-
A timbre matched center channel speaker is really not an option for me. The only one that comes close is the Martin Logan (ELS). Frankly, it's a little pricey for my system and usage. Although I'm equipped with 4 ESL's my system is primarily for 2 channel sound. My chair is directly on axis and the two flanking seats are quite close to being on axis. So, it's not that much of an issue for me. I run my Lexicon processor in phantom mode for the center channel and I have no problem hearing dialog.
When there is a thunderstorm in a movie I want to open an umbrella. Thunder and lightning make me want to duck.
-
Quote:
Originally Posted by JoeE SP9
When there is a thunderstorm in a movie I want to open an umbrella. Thunder and lightning make me want to duck.
I would suggest a two fold solution to this problem, meds and therapy.
-
The lovely Judy is providing plenty of therapy. I expect a lot of personal therapy from her tonight. The Chimay Grand Reserve is working quite nicely for my medication.
-
Quote:
Originally Posted by poppachubby
Hahahah, nice but Stan is the OP's name. You are Tony, let's get this right.
LOL I thought that was for me
-
Quote:
Originally Posted by JoeE SP9
The Chimay Grand Reserve is working quite nicely for my medication.
Cars, beer, audio gear... You have good tastes Joe, I'm sure we would get along very well!
-
I have a 2.1 set-up that has been suiting my purposes very well...no desire to pick up a center channel in the near future. While I don't experience the joys of distinct L-R separation as my brethren, the dialogue comes in quite clearly for our enjoyment.
-
Quote:
Originally Posted by audio amateur
Yes, you can choose to have the center sound rerouted to the L & R channels by setting the center speaker to 'off' on the AVR.
Indeed, this can be done with virtually all AV receivers or prepros. It creates a "phantom center", but Sir ToT has very precisely described the problem with this.
-
Quote:
Originally Posted by Feanor
Indeed, this can be done with virtually all AV receivers or prepros. It creates a "phantom center", but Sir ToT has very precisely described the problem with this.
I'm not saying it's good or bad, simply stating that it is possible and how to do it:)
-
Quote:
Originally Posted by audio amateur
Cars, beer, audio gear... You have good tastes Joe, I'm sure we would get along very well!
I'll be sure to thank my parents. They are responsible for my Champagne tastes. The beer budget I'm forced to live with is solely my responsibility. If you're ever in the Philadelphia area let me know. We could drink a few and listen to some music. That invite is for any of you that happen to visit this area.
BTW: Most mainstream American beer is pretty awful. A lot of Canadian and most Mexican beer is no better. They are influenced too much by American beer. American "craft" beers including brews like Sam Adams and Yeungling are pretty good but they are exceptions. Chimay is very expensive here so I have to drink St. Pauli Girl or Becks when I'm strapped. Woe is me! Both are widely available here in Philly.
-
Grolsch. After a week in Holland, I converted from Heineken.
Tetley. English style brewed in Australia.
Stella Artois/Carlsberg(Danish Import). The back-ups.
Always poured into a pilsner glass, never from the bottle. Research has shown that glass can chemically enhance the flavours of some beverages.
Cheers!!
http://www.weepingradish.biz/store/i...-glassware.jpg
-
Quote:
Originally Posted by JoeE SP9
The only one that comes close is the Martin Logan (ELS). Frankly, it's a little pricey for my system and usage.
Actually, Sound Lab also makes a hybrid center channel, but isn't cheap either.
Marquee
Like you, I would prefer the coherence and resolution of a four channel electrostatic solution to any five channel box or horn. :)
rw
-
Quote:
Originally Posted by E-Stat
Actually, Sound Lab also makes a hybrid center channel, but isn't cheap either.
Marquee
Like you, I would prefer the coherence and resolution of a four channel electrostatic solution to any five channel box or horn. :)
rw
Coherence and resolution is not limited to electrostatics. Also horn designs have improve so dramatically, that I think some of the best design could do battle with any electrostatic system out there.
-
I sense a battle about to unfold...
-
Quote:
Originally Posted by Sir Terrence the Terrible
Coherence and resolution is not limited to electrostatics.
I'm not aware of any full range horns. Most I see are three way designs with each driver having a decidedly different radiation pattern and profoundly more moving mass at the low end. Especially since most horns are supplemented by direct radiator woofers at the bottom. The discontinuity at the crossover points is electrically evident as a saddle in the impedance curve and changes in phase. Do you know of any studio class microphone that isn't a full range condenser design? It is for the same reason that I prefer a single driver solution especially for wide band instruments like a piano.
Quote:
Originally Posted by Sir Terrence the Terrible
I think some of the best design could do battle with any electrostatic system out there.
Would you care to cite an example?
To each his own.
rw
-
Funny how a lot of you seem to be into good beer. I've had the privilege of having been beer educated by my best friend who happens to be Belgian.
I've noticed that beer in general is quite expensive in the US compared to France. What's nice in the US is the variety of brews you have.
Thanks for the invite, it would be a pleasure. Unfortunately I don't know when I'll be around that area. You are welcome to Geneva and that's also for all of you.
Cheers!
http://www.sporting.be/content/forum...3104/Duvel.jpg
-
Forgot to mention, I was in Prague very recently (August), and had my first Pilsner. Didn't think much of it. Prices were good though, about 2-3 bucks for a pint (UK pint), which is over a liter.
Don't mean to be off topic so back onto those center speakers
-
Quote:
Originally Posted by E-Stat
I'm not aware of any full range horns. Most I see are three way designs with each driver having a decidedly different radiation pattern and profoundly more moving mass at the low end. Especially since most horns are supplemented by direct radiator woofers at the bottom. The discontinuity at the crossover points is electrically evident as a saddle in the impedance curve and changes in phase.
You have never heard of the Klipschorn? It is a full range horn design.
You seem to think that all horns are exactly alike, and exhibit the same characteristics. Not all horns are made by JBL or Klipsch.
Have you heard Klipsch's new top of the line speaker?
How about Sunny Cables horn loaded speakers.
How about Acapella Audio or AvanteGarde designs?
How about any of TAD horn loaded speakers?
How about the many custom studio designs out there?
The point I am trying to make to you is you have not heard enough of the current implementation of hybrid cone/horn loaded technology that does not sound horn like, exhibit a saddle in the impedance curve, or changes the phase at the crossover.
Quote:
Do you know of any studio class microphone that isn't a full range condenser design?
Yes, it is called the ball by Blue Microphones. It is a dynamic design with a frequency response of 35-16khz, and a dynamic range of 162db. Another is the Heil sound PR-40 dyanamic microphone with a frequency response of 28-18khz.
Quote:
It is for the same reason that I prefer a single driver solution especially for wide band instruments like a piano.
Single drivers especially electrostatics have one big deficiency, total output and sensitivity. They make good music speakers, but are not so good for hometheater application where the SPL go well into the 100+db region.
Quote:
Would you care to cite an example?
Doug Sax's custom design. Authur Mendell custom designs which are my favorite because he uses beryllium drivers behind the horns. These are not horn loaded speakers you will find in any high end shop, but perfect examples of hybrid horn loaded designs that could easily keep up with electrostatic designs note for note.
Quote:
To each his own.
rw
Exactly!
-
Indeed it's ideal to have a system with a center speaker, but in my experience you MUST make sure that the center channel is a sufficient match with the mains. The importance of the center speaker is a sliding scale.
For example, if you just insert any old speaker into the center channel and it severely mismatches with the mains, then you're much better off going without the center speaker.
Best case scenario is that you use three identical speakers up front. Perfect match and a seamless front soundstage if the speakers are positioned correctly. The horizontal center speaker is a compromise by necessity back when TVs were bulky boxes that took up the entire middle of the room. But, with most TVs now flat panels, wall mounting the TV now allows for the use of three identical speakers across the front.
-
Quote:
Originally Posted by Sir Terrence the Terrible
You have never heard of the Klipschorn? It is a full range horn design.
Oh, I have most certainly heard K-Horns. I'll pass on their honky midrange and limited range at the frequency extremes. If you re-read my post on the topic of coherency, you'll find that I am talking about single driver systems, not three way speakers with three decidedly different drivers with three decidedly different radiation patterns and multiple sets of crossovers that further reduce their ability to sound as one.
Quote:
Originally Posted by Sir Terrence the Terrible
You seem to think that all horns are exactly alike, and exhibit the same characteristics. Not all horns are made by JBL or Klipsch.
I find all multi-way speakers share the same challenges when the topic is coherency due to obvious reasons.
Quote:
Originally Posted by Sir Terrence the Terrible
Have you heard Klipsch's new top of the line speaker?
I thought the K-Horn was that model. The Avant-Garde is very clean sounding with excellent resolution whose bass sounds like it belongs to a completely different speaker. That is the discontinuity I hear with virtually all multi-way horn/direct radiator hybrids.
Quote:
Originally Posted by Sir Terrence the Terrible
The point I am trying to make to you is you have not heard enough of the current implementation of hybrid cone/horn loaded technology that does not sound horn like, exhibit a saddle in the impedance curve, or changes the phase at the crossover.
My complaint for the better ones is not that they share the honky, metallic sound of Altec and Klipsch horns, but to point out the obvious discontinuity between the dissimilar drivers. Play solo voice, piano or guitar and you'll hear what I'm referring to.
Quote:
Originally Posted by Sir Terrence the Terrible
Yes, it is called the ball by Blue Microphones. It is a dynamic design with a frequency response of 35-16khz, and a dynamic range of 162db. Another is the Heil sound PR-40 dyanamic microphone with a frequency response of 28-18khz.
Are you aware of any recording labels that use these? Do you notice these are also full range designs? Why do you think that is the case? Shoeps and Neumann has dominated the recording industry for decades.
Quote:
Originally Posted by Sir Terrence the Terrible
Single drivers especially electrostatics have one big deficiency, total output and sensitivity. They make good music speakers, but are not so good for hometheater application where the SPL go well into the 100+db region.
Indeed, it takes lots of radiating area and power to provide high output. As for me, I have zero desire to go "well into" the hearing damage range you prefer. As an aside, I always wear earplugs or sound deadening ear buds when I work in the yard for the same reason. I overwhelmingly choose quality over quantity. If you recall, we differed a while back during a conversation about two channel vs multi-channel systems. I continue to aver that one must necessarily compromise the quality of a MC system unless one has a huge multi-hundred thousand dollar budget. Naturally, had I access to an astronomical budget, I would choose Ray Kimber's idea of doing it right:
RMAF Show
More coverage-scroll down a bit
rw
-
Quote:
Originally Posted by E-Stat
Oh, I have most certainly heard K-Horns. I'll pass on their honky midrange and limited range at the frequency extremes. If you re-read my post on the topic of coherency, you'll find that I am talking about single driver systems, not three way speakers with three decidedly different drivers with three decidedly different radiation patterns and multiple sets of crossovers that further reduce their ability to sound as one.
It is obvious you have NOT heard the new K-horns. Again, your comments are outdated. The horn hybrids I had custom made for my studio are a 4 way horn/cone hybrid. It has two different drivers (only the bass driver is a cone), it does NOT have 4 different radiation patterns on each horn, it was designed so that each radiation pattern remains exactly the same all the way through crossover point with no beaming whatsoever. The crossover system was expressly designed so that the speaker DOES sound like one. While you are entitled to you opinions (that are outdated at best), they do not reflect the current crop of horn hybrids that are out there. It is okay to love the design you chose, but you do not have to $hit on other designs because of that love.
Quote:
I find all multi-way speakers share the same challenges when the topic is coherency due to obvious reasons.
Challenges can be overcome, especially when they are well understood. Coherency has nothing to do with a specific design, or the fact that one uses just one driver. It can be achieved in many different designs, and over multiple drivers if the system is well designed and matched. To say only one design is capable of coherence is disingenuous.
Quote:
I thought the K-Horn was that model. The Avant-Garde is very clean sounding with excellent resolution whose bass sounds like it belongs to a completely different speaker. That is the discontinuity I hear with virtually all multi-way horn/direct radiator hybrids.
Yeah well electrostatics don't do deep bass at high levels without tremendous amounts of distortion.
Quote:
My complaint for the better ones is not that they share the honky, metallic sound of Altec and Klipsch horns, but to point out the obvious discontinuity between the dissimilar drivers. Play solo voice, piano or guitar and you'll hear what I'm referring to.
A good horn hybrid design does not have discontinuities between drivers. I have played plenty of piano, solo and guitar through mine, and I don't hear any of the issues you bring up. I think you are painting a fine painting with a sweeper truck.
Quote:
Are you aware of any recording labels that use these? Do you notice these are also full range designs? Why do you think that is the case? Shoeps and Neumann has dominated the recording industry for decades.
Shoeps and Neumann don't dominate any more, and the world of recording extends beyond just audio only applications.
My studio uses these, and yes I notice they were full range NON condenser microphones as well.
Quote:
Indeed, it takes lots of radiating area and power to provide high output. As for me, I have zero desire to go "well into" the hearing damage range you prefer. As an aside, I always wear earplugs or sound deadening ear buds when I work in the yard for the same reason. I overwhelmingly choose quality over quantity.
I prefer headroom, not hearing damage. Headroom is where your choice fails. You do not have to choose quality over quantity. You can have both.
Quote:
If you recall, we differed a while back during a conversation about two channel vs multi-channel systems. I continue to aver that one must necessarily compromise the quality of a MC system unless one has a huge multi-hundred thousand dollar budget. Naturally, had I access to an astronomical budget, I would choose Ray Kimber's idea of doing it right:
RMAF Show
More coverage-scroll down a bit
rw
This comment is pure BS. It does not require a multi hundred thousand dollar budget to get high quality MC sound. I must say I wouldn't spend ten thousand dollars on a high quality two channel system that already distorts the original recordings spatial perspective. That would be a compromise as well in my book. No matter how much you spend on a two channel system, it cannot equal the spatial accuracy that a very good multichannel system can give you.
Ray Kimber's setup is old school. You can get 5 TAD speakers or Thiel CS3.7, and Krell or California Labs amplification and get great sound for far less than $504,000+ dollars. His system would not even fit in most peoples rooms, and is not realistic for home applications period.
-
Quote:
Originally Posted by Sir Terrence the Terrible
It is obvious you have NOT heard the new K-horns.
New K-Horns? No. Stuffing speakers in a corner doesn't do much for imaging.
Quote:
Originally Posted by Sir Terrence the Terrible
Again, your comments are outdated. The horn hybrids I had custom made for my studio is a 4 way horn/cone hybrid. It has two different drivers (only the bass driver is a cone)...
A four way speaker using only two different drivers? So, the upper three range horns are all identical? OK! Pointing out why single drivers are inherently more coherent is not $hitting on other designs.
Quote:
Originally Posted by Sir Terrence the Terrible
Challenges can be overcome, especially when they are well understood. A little snobbish huh?
My observations are the same against models like the Genesis 1, Nola Grand Reference and Scaena. Each of those has wonderful dynamics and frequency extension, but does not match a full range electrostat to these ears for absolute coherency. YMMV.
Quote:
Originally Posted by Sir Terrence the Terrible
Yeah well electrostatics don't do deep bass at high levels without tremendous amounts of distortion.
When one listens at normal levels, that points becomes moot.
Quote:
Originally Posted by Sir Terrence the Terrible
A good horn hybrid design does not have discontinuities between drivers. I have played plenty of piano, solo and guitar through mine, and I don't hear any of the issues you bring up. I think you are painting a fine painting with a sweeper truck.
To each his own.
Quote:
Originally Posted by Sir Terrence the Terrible
I prefer headroom, not hearing damage. Headroom is where your choice fails.
Then I'll disregard your previous comment "where the SPL go well into the 100+db region." You either go well into that SPL region or you don't. I certainly don't nor have any desire to.
Quote:
Originally Posted by Sir Terrence the Terrible
You do not have to choose quality over quantity. You can have both.
Such is relative.
Quote:
Originally Posted by Sir Terrence the Terrible
This comment is pure BS. It does not require a multi hundred thousand dollar budget to get high quality MC sound.
Complete the concept. You must necessarily compromise quality until that level (in my experience) for having to split the amplifier and speaker budget by more than half for a five channel system vs. a two channel one. I have a modest five channel HT system which works fine for that medium. For music, however, I would rather choose better components over more channels. Obviously, your preference is different.
Quote:
Originally Posted by Sir Terrence the Terrible
No matter how much you spend on a two channel system, it cannot equal the spatial accuracy that a very good multichannel system can give you.
That's great theory when you completely forget the concept of a musical library. I listen to my music, not concepts. About 1% of the library I've built over the past forty years happens to be MC. Even if the majority of my multi-miked recordings were MC, your comments would not apply because the image would still be artificially created. OTOH, I have heard many true MC Telarc recordings and they do sound nice. But I'm not one of those audiophiles who only listens to a handful of "spectacular" recordings.
Quote:
Originally Posted by Sir Terrence the Terrible
You can get 5 TAD speakers or Thiel CS3.7, and Krell or California Labs amplification and get great sound for far less than $504,000+ dollars.
Yes you can if your prefer those speakers.
Quote:
Originally Posted by Sir Terrence the Terrible
His system would not even fit in most peoples rooms, and is not realistic for home applications period.
Using Twelve Pro Stats driven by 10 kW of power is certainly not necessary for a home environment. Four of them for the front using smaller versions for the rear would be perfectly adequate. :)
rw
-
I love how these arguments go nowhere:-) How bout some more beer talk?
-
Quote:
Originally Posted by Woochifer
Best case scenario is that you use three identical speakers up front. Perfect match and a seamless front soundstage if the speakers are positioned correctly. The horizontal center speaker is a compromise by necessity back when TVs were bulky boxes that took up the entire middle of the room. But, with most TVs now flat panels, wall mounting the TV now allows for the use of three identical speakers across the front.
You read my mind, Woochifer.
I was just considering my next speaker set upgrade and I'm thinking about going with 6 of the same model monitors and a sub for a 6.1 setup. What I haven't decided is which monitors to get. I could stick with the Silverline Audio brand, since I'm familiar with their performance and I love their look...or I could go in another directions. Decisions, decisions...
By the way, if anyone has blackmail photos of Santa caught in a compromising position with his elves, can you send it to me? I'd really like to get these for Christmas, http://www.aaudioimports.com/ShowPro...p?hProduct=145 but I don't think Santa will bring it to me on account of my being more naughty than nice this year. :hand:
-
Quote:
Originally Posted by E-Stat
New K-Horns? No. Stuffing speakers in a corner doesn't do much for imaging.
Funny, the new K-horns do not have much of a problem with imaging when I heard them. Have you ever heard of a false corner?
Quote:
A four way speaker using only two different drivers? So, the upper three range horns are all identical? OK! Pointing out why single drivers are inherently more coherent is not $hitting on other designs.
No the horn sizes are different, but the drivers are the same.
A single driver may be more coherent in a single range, but not at all frequency ranges. Electrostatics are power hungry and inefficient, they beam at high frequencies, are placement fussy, and imaging is narrow. What they do give you is a great midrange, and for some folks, that is all they really want.
Quote:
My observations are the same against models like the Genesis 1, Nola Grand Reference and Scaena. Each of those has wonderful dynamics and frequency extension, but does not match a full range electrostat to these ears for absolute coherency. YMMV.
Then you argument is based on personal choice and that is it basically.
Quote:
When one listens at normal levels, that points becomes moot.
Normal levels are based on individual perspectives, not an established standard.
Exactly!
Quote:
Then I'll disregard your previous comment "where the SPL go well into the 100+db region." You either go into that SPL region or you don't. I certainly don't.
That's your choice. Since a 110 piece orchestra can get that loud live during short peaks, I would hope my speaker could duplicate that. A short peak of 105db is not going to damage anyone's hearing.
Many things are.
Quote:
Complete the concept. You must necessarily compromise quality until that level (in my experience) for having to split the amplifier and speaker budget by more than half for a five channel system vs. a two channel one. I have a modest five channel HT system which works fine for that medium. For music, however, I would rather choose better components over more channels. Obviously, your preference is different.
Better components is a relative concept. Your better is not my better obviously. I have two 7.1 systems in my house, and I don't believe I had to compromise a dime to get great sound. A person that thinks two dimensionally believes that you have to make compromises that are so severe that good sound could cannot be achieved at a reasonable cost for a multichannel system. That is silly and narrow minded.
Quote:
That's great theory when you completely forget the concept of a musical library. I listen to my music, not concepts. About 1% of the library I've built over the past forty years happens to be MC.
Such a dichotomy. You spend all of this money on two channels systems in the name of coherency, yet the system compromises the accuracy of the performance from a spatial perspective. You rob Peter to pay Paul, interesting trade off. You may ignore the concept in the name of listening to the music, but that does not take a thing away from the concept. Your argument is personal, but not exportable.
Quote:
Yes you can if your prefer those speakers.
Exactly!
Quote:
Using Twelve Pro Stats driven by 10 kW of power is certainly not necessary for a home environment. Four of them for the front using smaller versions for the rear would be perfectly adequate. :)
A four channel surround system still has spatial compromises when considering it is widely understood that it takes three front speakers to minimally map a front soundstage. Two speakers only work well from a central spot exactly in between them. Move slightly off axis, and your soundstage accuracy completely disappears. Any phantom images between those two speakers are still subject to a 3db dip in the frequency ranges between 1-4khz, no matter how good the speakers are. A dedicated speaker is always better than a phantom image, especially when heard slightly off axis. Two channel systems are for one person only, which means that only one can appreciate it, and for two it is a compromise for both parties. If you are the only one listening, great, but I think having the audience in a live recording clapping in front of me instead of two the sides, and/or rear is a little disconcerting for me. Having ambience emanate from behind the speakers instead of behind me is as well. Concept on not, spatial accuracy is just as important as any other parameter for audio listening.
rw[/QUOTE]
-
Quote:
Originally Posted by audio amateur
I love how these arguments go nowhere:-) How bout some more beer talk?
They do go nowhere because it is based on personal preference, not some elevated standard of performance or accuracy.
-
Quote:
Originally Posted by Sir Terrence the Terrible
Funny, the new K-horns do not have much of a problem with imaging when I heard them. Have you ever heard of a false corner?
Well if they wouldn't sound (even more) like crap when taken out of the corner, then they might be more popular. If you recall Paul envisioned using them in a three channel system with a Belle in the middle. BTW, I saw a $20k model in Stereophile that abandoned the folded horn corner design. Is that the one to which you referred to earlier?
Quote:
Originally Posted by Sir Terrence the Terrible
and imaging is narrow. What they do give you is a great midrange, and for some folks, that is all they really want.
The faceted array design of the Sound Labs provides your choice of radiation angles. Mine is a 90 degree design that sounds pretty much the same across that wide stretch. You can also choose 22 or 45 degree designs for use with arrays. The cost no object "old school" array Ray Kimber used was three 22 degree units per side. As for me, I find flat response to 25 hz and extension to above 20 kHz sufficient for my purposes. Admittedly, below that their response nose dives. Perhaps your definition of the midrange differs from mine.
Quote:
Originally Posted by Sir Terrence the Terrible
Then you argument is based on personal choice and that is it basically.
As are everyone's arguments. Pick the choice of compromises you find best. Again, you'll note there are zero multi-way microphones at the other end of the transduction chain. The benefits are identical.
Quote:
Originally Posted by Sir Terrence the Terrible
Normal levels are based on individual perspectives, not an established standard.
No disagreement there. Thirty square feet of panel provides exceptionally low distortion bass at the non-damaging levels I prefer.
Quote:
Originally Posted by Sir Terrence the Terrible
That's your choice. Since a 110 piece orchestra can get that loud live during short peaks, I would hope my speaker could duplicate that.
If you sit in the pit or row "B". That's not where I ever chose to sit.
Quote:
Originally Posted by Sir Terrence the Terrible
A short peak of 105db is not going to damage anyone's hearing.
Here again, if that's what you enjoy, go for it !
Quote:
Originally Posted by Sir Terrence the Terrible
That is silly and narrow minded.
We have very different frames of reference.
Quote:
Originally Posted by Sir Terrence the Terrible
Such a dichotomy. You spend all of this money on two channels systems in the name of coherency, yet the system compromises the accuracy of the performance from a spatial perspective.
Not just coherency. Transparency. Transient response. Soundstage height as well as width. I find the minimally miked classical recordings from the 50s, Telarcs, Sheffields, Reference Recordings, Windham Hill, etc all provide a very natural representation because the spatial cues are on the recording. That's why I have spent considerable effort with speaker placement and room treatments. The bigger question remains that I don't limit my musical choices by the choosing only gee-whiz recordings. I get the other benefits with ALL my music.
Quote:
Originally Posted by Sir Terrence the Terrible
...but that does not take a thing away from the concept. Your argument is personal, but not exportable.
Agreed. My enjoyment comes from the music, not the gear. I gather then you completely dispense with listening to any music recorded prior to what ten years ago?
Quote:
Originally Posted by Sir Terrence the Terrible
Move slightly off axis, and your soundstage accuracy completely disappears. Any phantom images between those two speakers are still subject to a 3db dip in the frequency ranges between 1-4khz, no matter how good the speakers are.
Our speaker experience is quite different with respect to music. I use a center channel with the HT.
BTW, I see Telarc now uses the Sanken 100 kHz condenser. Didn't think they would go backwards.
rw
-
Quote:
Originally Posted by Sir Terrence the Terrible
They do go nowhere because it is based on personal preference, not some elevated standard of performance or accuracy.
Yet you feel the need to dive in and attempt to "correct" me. Go figure. ???
rw
-
Well if this keeps going we are going to have to add a special forum thread for beer talk. I'm all about it since I enjoy the hops and think its a good thing to do when listening to good music on a good system.
About the center channel issue I am on the fence with this one. I think if your speakers have spot on imaging which electrostats seem to have if set up properly I could see where the need for a center channel may not be necessary especially if your mains are capable of bringing out the extra information given from the processor. But if your system does not have spot on imaging and your seating position is not directly in the sweet spot then i would say a center would be a must.
-
A system without a center is great, kinda like a car with three wheels.
Not so bad on stereo, etc, but most of teh sound from a movie comes from the
center.
Dont have one and the electronics kinda spreads the sound around, like so much mustard.
This "talking" between the fronts is the center info being portioned out.
Now wheres the beer?:1:
-
Quote:
Originally Posted by E-Stat
Yet you feel the need to dive in and attempt to "correct" me. Go figure. ???
rw
Yes there was a need when your comments attempt to put one speaker technology over another. Go figure that!
-
Quote:
Originally Posted by Sir Terrence the Terrible
Yes there was a need when your comments attempt to put one speaker technology over another. Go figure that!
You have your opinion and points of reference and I have mine which are very different than yours. Regardless of speaker technology, I find that full range transducers of any design - dynamic, ribbon, electret, ionic, electrostatic - whatever are inherently more coherent than blending multiple drivers of any sort to act as one.
rw
|