Quick set up (factory fitted cartridge only)
Your turntable has been designed to be
very simple to set-up and use.
We have designed this turntable so that
correct tracking weight can be achieved by
simply moving the balance weight as close
to the pivot point as possible. Fig 1.
This will automatically set the arm to within
the recommended tracking range for the
factory fitted stylus. (1.5g - 2.0g)
The Bias slider should be set to the same
figure as the tracking weight.


I would try this method first and listen for any improvement. If the tracking force is too low and the groove is heavily modulated it can throw the cartridge around a bit. I am going to listen to the video again to see if I can gain more info.