Results 1 to 8 of 8
  1. #1
    Forum Regular stevef22's Avatar
    Join Date
    May 2006
    Posts
    83

    Exclamation What is Line Source by SpeakerCraft? What is the physics of this technology?

    What is Line Source by SpeakerCraft? What is the physics of this technology? I am thinking about buying Some SpeakerCraft Starlet 4 In-Wall Loudspeakers. Please advise.

    About the Starlet Series:

    Highly Evolved, In-Wall Home Theater Systems. SpeakerCraft has created a line of in-wall speakers designed for both home theater and critical listening applications.

    The Starlet series was designed around a highly acclaimed speaker configuration called Line Source. The Line Source design provides exceptional imaging and accuracy especially for in-wall speakers. At the heart of the system are multiple 61⁄2" woofers that run from top to bottom on each model. The woofers are all horn loaded to improve performance and are topped with a matched ribbon tweeter. The ribbon tweeter produces an incredible off-axis response. This wide sound pattern allows the speaker to sound great wherever you are in the room. This also is a bonus for home theater systems, where listening position is critical.

    Incredibly, the entire assembly has its own retrofittable extruded aluminum enclosure. This is made possible by utilizing a neodymium magnet that is located at the front of the speaker, freeing up the space behind the woofer. Neodymium magnets are more powerful and therefore can be made smaller. There is nothing off the shelf in this speaker, every part was engineered from the ground up specifically for the best performance. The acoustic and mechanical challenges were a tremendous undertaking, but it was worth it. The end result is a phenomenal sounding product we are sure will astound you.

    SpeakerCraft Starlet 4 Performance Specifications:

    * Four 6-1/2" Kevlar Cone Woofers
    * Ribbon Tweeters
    * Line Source Design
    * Extruded Aluminum Enclosure

    Efficiency: 90dB 1W/1m
    Min. Power Requirements: 2 x 75 watts per speaker
    Impedance: 6 OHMS Nominal
    Frequency Response: 90Hz - 21kHz ±2dB
    Grille Frame Dimensions: H 36-3/4" x W 9-1/4" x D 3-1/4"
    Cut-out Dimensions: H 34-1/4" x W 8"

  2. #2
    Suspended markw's Avatar
    Join Date
    Dec 2001
    Location
    Noo Joisey. Youse got a problem wit dat?
    Posts
    4,659
    It sounds, to me, like yer basic speaker system that uses four identical woofers mounted one above the other so it produces a long, thin speaker.

    Add a heckuva lot of puffery and a pinch of techno-babble and, violia, you get the "line source" speaker.

  3. #3
    Forum Regular stevef22's Avatar
    Join Date
    May 2006
    Posts
    83
    lol, I am thinking about that.... I know PSB uses a technology called "Transmission Line" for their in wall speakers. What do you think of the quality of SpeakerCraft? Just nice puffery or actual substance to their products?

  4. #4
    RGA
    RGA is offline
    Forum Regular
    Join Date
    Nov 2003
    Posts
    5,539
    yeah a lot of blather - 90hz? In wall? They need the technoblathering because that's probably all they've got.

    Still, you never know give them a listen and see if you like them.

  5. #5
    Forum Regular stevef22's Avatar
    Join Date
    May 2006
    Posts
    83
    Ill pair up a subwoofer with this, doubt 90 hzzz thats dumb

  6. #6
    Forum Regular stevef22's Avatar
    Join Date
    May 2006
    Posts
    83
    90 hz from 3-1/4" . YA baby

  7. #7
    Forum Regular stevef22's Avatar
    Join Date
    May 2006
    Posts
    83
    Ohhh its 90 hz because all the woofers are combining to create one large long speaker/sub?

  8. #8
    Music Junkie E-Stat's Avatar
    Join Date
    Dec 2003
    Posts
    5,462
    Quote Originally Posted by stevef22
    What is Line Source by SpeakerCraft? What is the physics of this technology?
    The concept of a line source is hardly new. Early 1970s Magneplanar Tympanis were line source speakers. As opposed to point source speakers, line sources are typically narrow and tall speakers which inherently radiate differently. Their output also falls in a linear fashion with distance as opposed to dropping off by the square. There are lots of different flavors. Although they are not narrow, my Sound Lab electrostats are line sources. (see my gallery if you're interested). While my speakers use a single full range driver, other examples are the Pipedreams speakers that use multiple arrays of conventional speakers. Line arrays are now in vogue in large scale sound reinforcement systems by JBL and others.

    rw
    Last edited by E-Stat; 06-23-2008 at 04:41 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •