Results 1 to 4 of 4
  1. #1
    Suspended
    Join Date
    Apr 2004
    Posts
    148

    What is the best way to set and adjust your sub?

    Set volume straight in the middle of sub and adjust volume through your receiver or leave volume in the middle on receiver and adjust volume on sub when needed or adjust both?

  2. #2
    Loving This kexodusc's Avatar
    Join Date
    Nov 2003
    Location
    Department of Heuristics and Research on Material Applications
    Posts
    9,025
    I think it's actually more of a mix of the two. A lot of subs have some difficulty sensing the input voltage for auto-on purposes. Boosting the strength by bumping up the LFE level on your receiver helps. But don't over do it if you don't have to or you can risk maxing out the output strength.

    When setting the volume dial on your sub, it's often recommended to turn the knob to 11 o'clock or 1/2 way, etc, depending on the model. That's just an arbitrary point of reference. Cranking the volume on the sub higher is okay too, it doesn't necessarily mean your amp is near max. The trick is to level match it with your system.

    I pick a good point where my input strength is sufficient for auto/on purposes, but not too high that it clips, and turn the amp's dial up accordingly to level match...fine tuning with the receiver. The receiver is handier to make adjustments if certain sources differ in bass output.

  3. #3
    BooBs are elitist jerks shokhead's Avatar
    Join Date
    Dec 2004
    Location
    So Cal
    Posts
    1,994
    If the volume is to high on the sub,sometimes the auto on wont work until you turn you receiver way up so 10/12 is a pretty good place.
    Look & Listen

  4. #4
    Suspended
    Join Date
    Apr 2004
    Posts
    148
    Thanx guys!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •