Results 1 to 4 of 4
  1. #1
    Forum Regular
    Join Date
    Jun 2006

    Replacing Power Supply in a JBL Subwoofer- Easy or Hard?

    The JBL Powerbass PB-12 is famous for having a defective power supply. Someone is selling one on CraigsList that "doesn't power up" for a small $60. The average price paid in the Reviews section was $400, so the difference is large. I saw alot of complaints about the amp dying.

    How hard/expensive would it be to replace the amp myself? Would I be able to use a generic amp that meets its specifications, or would I have to find an original made specifically for that sub?

  2. #2
    Forum Regular Florian's Avatar
    Join Date
    Feb 2005
    Well it depends on the design of the unit. If the crossover is attached to the amp plate then you need the same one, or one that is exactly alike. Switching these units is very easy to do mechanically.
    Lots of music but not enough time for it all

  3. #3
    Mutant from table 9
    Join Date
    Mar 2005
    Flo is generally right, but I disagree that the amp needs to be identical. If you have your AVR doing crossover duty, then the crossover controls of the sub are superfluous. Hell you could run it with an outboard amp with the speaker wire running through a hole you drill in the side and seal with caulk.

    But by the time you pay for postage, your $60 is more like $100. Then your amp is $200 So we're up to $300 for a sub that is gonna look pretty ghetto with either an ill fitting plate amp or a wire running through a hole in the side and only retailed for $480 in the first place. The ultimate problem with your proposal is that you are essentially looking for a free lunch. That's okay. I rocked a ghetto sub setup all through college. But, there are better ways to spend $300 bucks on sub.
    Joyce Summers: "You've got really great albums!"
    Rupert "Ripper" Giles: "Yeah... they're okay..."

    "Tha H-Dog listens easy, always has, always will." - Herbert Kornfeld (R.I.P.)

    "I lick the mothra moniters because they pump up the base!!" - Dusty Beiber

  4. #4
    Crackhead Extraordinaire Dusty Chalk's Avatar
    Join Date
    Nov 2003
    below the noise floor
    It should be fairly easy -- just go over to Parts Express and get a new one. The crossover might be an issue -- some crossovers compensate for other things than the crossover point -- nulls and such, but a lot of those subs use the amp separately, they probably source the amps from a similar place except in bulk. Be prepared to pay as much or more for a new amp, though.
    Eschew fascism.
    Truth Will Out.
    Quote Originally Posted by stevef22
    you guys are crackheads.
    I remain,
    Peter aka Dusty Chalk

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts