Results 1 to 16 of 16
  1. #1
    Forum Regular
    Join Date
    Apr 2007
    Posts
    7

    WANTED - - -yamaha m-50 power amp specs

    does anybody have specs on this amp that they can email me or post?

    thanks

  2. #2
    Forum Regular anamorphic96's Avatar
    Join Date
    Jun 2004
    Location
    Northern California
    Posts
    538
    Have you tried contacting Yamaha ? Just a thought. Most companies keep records of specs.

  3. #3
    Suspended PeruvianSkies's Avatar
    Join Date
    Oct 2006
    Posts
    3,373
    Quote Originally Posted by anamorphic96
    Have you tried contacting Yamaha ? Just a thought. Most companies keep records of specs.
    I'll second that in motion and also ask...Anamorphic...how are you enjoying your new speakers and when do we get a nice thorough review?

  4. #4
    Shostakovich fan Feanor's Avatar
    Join Date
    Jun 2002
    Location
    London, Ontario
    Posts
    8,127

    Yamaha manuals

    Quote Originally Posted by rumble
    does anybody have specs on this amp that they can email me or post?

    thanks
    Many Yamaha user manuals can be found by searching here ...
    However I don't see the M-50, although they have the M-40, -45, and -60: are you sure you have the right model number?

  5. #5
    Forum Regular
    Join Date
    Apr 2007
    Posts
    7

    yamaha m50 manual & specs

    Quote Originally Posted by Feanor
    Many Yamaha user manuals can be found by searching here ...
    However I don't see the M-50, although they have the M-40, -45, and -60: are you sure you have the right model number?

    hi everyone

    yes, i've searched high and low (even at yamaha's site).

    i found a guy selling an m50 and it's preamp and receiver WITH all the manuals on ebay and he said he'd copy it for me (i offered to pay) but he never came through, and i even contacted the buyer about getting/paying for a copy but they never responded.

    there was also an m50 on a belgium ebay site that mentioned some specs but - i can't read dutch and i lost the page....

    yeah, it's strange that it isn't on the yamaha site. all the back panel shots i've seen for their other m series amps list 4 ohm ratings (but not mine) so that's why i'm hesitant..
    (mine says 8-16 ohms over the speaker terminals)

    i have an older yamaha integrated amp (ca 810??) that i'm using the preamp out of and going into the m-50 running a pair of ads L570's and they sounded amazing.

    i have a friend that works at bose, and when i fired them up he was startled at how good it all sounded.

    i have 2 pairs of ADS 570's, a pair of L620s, a pair of L1s, a pair of L300cs, a pair of L470s, 2 pairs of L200s, and my new set of L710s.

    i guess you could say i'm an ads freak... i find the yamaha/ads a great combination.

    i design sound fx (also a pro drummer) and used to beta test a lot of (mac) audio software before i moved and bought a house, and i'm just getting my studio up and running after 5 years.

    i also just found an old integrated eico hf81 tube amp i didn't realize i had but i'm going to have that modified so i can use it as a mic preamp going into my mixer when i do recording sessions so i can get that warm tube sound when i record digital tracks in the computer.

  6. #6
    Forum Regular
    Join Date
    May 2003
    Posts
    400
    I can't help you with the paperwork, but be glad for your purchase! Any member of the M-series is well worth having. Good sound, not too expensive. I have an M-35 myself, and I just love it.

    Laz

  7. #7
    Forum Regular
    Join Date
    Apr 2007
    Posts
    7
    Quote Originally Posted by trollgirl
    I can't help you with the paperwork, but be glad for your purchase! Any member of the M-series is well worth having. Good sound, not too expensive. I have an M-35 myself, and I just love it.

    Laz

    yeah, i like it a lot, but here's something interesting:

    http://www.yamaha.co.jp/manual/english/result.php

    m 40 specs:

    8 ohms - 120w
    6 ohms - 145w
    4 ohms - 170w
    also has an auto class a switch. when off it functions as class a/b amp

    m 45 specs:

    8 ohms - 125w
    6 ohms - 150w
    4 ohms - 180w
    also has an auto class a switch when off it functions as class a/b amp

    --------------------
    M 50: (my amp)

    does not have an auto class a switch. (m40, 45 & 60 do)

    no specs listed at yamaha's site for the m 50.
    (because this whole universe is against me)

    --------------------

    m 60 specs:

    8 ohms - 160w
    6 ohms - 185w
    4 ohms - 210w
    also has auto class a switch. when off it functions as class a/b amp
    also has ohm load selector switches to adjust meters for 2, 4, or 8 ohm loads


    is the m-50 a yamaha "black sheep" (because there are no specs listed...)?

  8. #8
    I took a headstart... basite's Avatar
    Join Date
    Jul 2006
    Location
    Mortsel, Antwerp, Belgium, Europe, Earth
    Posts
    3,056
    Quote Originally Posted by rumble
    there was also an m50 on a belgium ebay site that mentioned some specs but - i can't read dutch and i lost the page....

    well, if you're able to find the page (maybe in your internet history or so) post the link, I'm from belgium, translating dutch to english is no problem at all

    Keep them spinning,
    Bert.
    Life is music!

    Mcintosh MA6400 Integrated
    Double Advent speakers
    Thiel CS2.3's
    *DIY Lenco L75 TT
    * SME 3012 S2
    * Rega RB-301
    *Denon DL-103 in midas body
    *Denon DL-304
    *Graham slee elevator EXP & revelation
    *Lehmann audio black cube SE
    Marantz CD5001 OSE
    MIT AVt 2 IC's
    Sonic link Black earth IC's
    Siltech MXT New york IC's
    Kimber 4VS speakercable
    Furutech powercord and plugs.

    I'm a happy 20 year old...

  9. #9
    Forum Regular
    Join Date
    Apr 2007
    Posts
    7
    Quote Originally Posted by basite
    well, if you're able to find the page (maybe in your internet history or so) post the link, I'm from belgium, translating dutch to english is no problem at all

    Keep them spinning,
    Bert.

    hi bert

    i'm sure i can't find it on the belgium site as it is probably at least 2 weeks old and i have no idea where i came across the link (google maybe?), but i have an excerpt from it that i asked a friend to translate (but they never got back to me) so maybe you can translate it.


    i don't know if the guy is quoting fro the manual or talking off the top of his head.

    > Deze high-end Yamaha is echt als nieuw, 100% in orde.
    > Het is een zware, knappe versterker die tot op 2 ohm stabiel blijft.
    > Wie dus twee paar 4 ohm (of ook 8 ohm natuurlijk) boxen heeft die afzonderlijk het
    > vermogen van deze eindtrap niet zouden aankunnen, kan deze gewoon samen aansluiten.

  10. #10
    Do What? jrhymeammo's Avatar
    Join Date
    Jan 2005
    Posts
    3,276
    No need for basite, Uncle JRA is here to help. I can read a bit of Dutch, no problem. Please excuse my bad grammar. If you can't read what I write then that's your problem.


    These endend end Yamaha are real as new, 100% in order. It is a heavy, nice amplifier which remains up to on 2 ohm stable. He who therefore two couples of 4 ohm (or ohm also 8 of course) would manage boxes that separately the capacity of this end staircase, these can connect simply together.


    You are very welcome.

    btw, just try this site for translation.

    http://world.altavista.com/tr

    私ほど素晴らしい人間はこの世に存在しない。ははははははは!!

  11. #11
    AR Newbie Registered Member
    Join Date
    May 2007
    Posts
    2

    Yamaha M-50 manual

    http://homepage.mac.com/radhaz/PhotoAlbum4.html

    Hope this is what you were looking for.

  12. #12
    Forum Regular
    Join Date
    Apr 2007
    Posts
    7
    Quote Originally Posted by ryuuoh
    http://homepage.mac.com/radhaz/PhotoAlbum4.html

    Hope this is what you were looking for.

    ha!

    well, it's hopeful, but i can't be 100% sure he (the dutch guy) is quoting fact.

    the dutch translates oddly. i get the gist of it though.

    what's MORE odd is that there are no specs for the m-50 on yamaha's site,
    but specs for the models before it and after it, all of which have class a switches on them (the m-50 doesn't).


    i don't want to make the wrong assumption that it is ok down to 4 ohms, especially when the back plate printing over the speaker terminals says 8-16 ohms.

  13. #13
    Forum Regular
    Join Date
    Apr 2007
    Posts
    7
    Quote Originally Posted by ryuuoh
    http://homepage.mac.com/radhaz/PhotoAlbum4.html

    Hope this is what you were looking for.

    oops!

    sorry - i didn't see the link.

    fantastic! thanks very much!

  14. #14
    Forum Regular
    Join Date
    Apr 2007
    Posts
    7
    Quote Originally Posted by jrhymeammo
    No need for basite, Uncle JRA is here to help. I can read a bit of Dutch, no problem. Please excuse my bad grammar. If you can't read what I write then that's your problem.


    These endend end Yamaha are real as new, 100% in order. It is a heavy, nice amplifier which remains up to on 2 ohm stable. He who therefore two couples of 4 ohm (or ohm also 8 of course) would manage boxes that separately the capacity of this end staircase, these can connect simply together.


    You are very welcome.

    thanks... what an odd language...

    nice chest btw....

  15. #15
    AR Newbie Registered Member
    Join Date
    May 2007
    Posts
    2

    Yamaha B-50

    http://page9.auctions.yahoo.co.jp/jp/auction/k45763795

    If the link is unusable, it points to a page on Yahoo Japan auctions. There is a Yamaha B-50 amp for sale that looks exactly like the M-50.
    Last edited by ryuuoh; 05-13-2007 at 07:04 PM. Reason: fixed link

  16. #16
    I took a headstart... basite's Avatar
    Join Date
    Jul 2006
    Location
    Mortsel, Antwerp, Belgium, Europe, Earth
    Posts
    3,056
    Quote Originally Posted by rumble
    thanks... what an odd language...

    nice chest btw....

    that English is very odd indeed, no need to say the translation site translates a little to litteraly
    Dutch isn't that weird, only the translator site thinks it is, and then it will translate every word seperately, and it won't care about grammar...

    the ebay guy tells that that it is a high end amp, like new, and that it's heavy, and beautiful, and stays stable till 2ohms, so you could use 2 pairs of 4ohm speakers (or 8 ohm speakers) together without having problems and blah blah blah

    oh yeah, 'eindtrap' is a dutch word for 'power amp'

    Keep them spinning,
    Bert.
    Life is music!

    Mcintosh MA6400 Integrated
    Double Advent speakers
    Thiel CS2.3's
    *DIY Lenco L75 TT
    * SME 3012 S2
    * Rega RB-301
    *Denon DL-103 in midas body
    *Denon DL-304
    *Graham slee elevator EXP & revelation
    *Lehmann audio black cube SE
    Marantz CD5001 OSE
    MIT AVt 2 IC's
    Sonic link Black earth IC's
    Siltech MXT New york IC's
    Kimber 4VS speakercable
    Furutech powercord and plugs.

    I'm a happy 20 year old...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •