Results 1 to 6 of 6
  1. #1
    Forum Regular Ogeez's Avatar
    Join Date
    Mar 2004
    Location
    Stittsville
    Posts
    20

    Cool Speaker Wire running parallel to Household 120v

    I have discovered an issue with my speakers (wired to 16 and 18 g) where I heard a slight hum during a scene that was simply not producing sound. I never gave it much thought and had always beleived that it was the media at fault or the fact that I had the volume so loud that I was hearing the elctric current humming through the speakers.

    Well I had mentioned this during a conversation with a friend of mine who happens to be in the Audio business for the past 25 years and he told me to trace the speaker cables and make sure that any 120 volt wire running nearby (within 6 inches of the speaker wire) was not running parallel to the speaker wire. Sure enough I had my rear speaker wires running under the floor attached to the baement ceiling joists directly along-side an existing household 120v wire. I made the effort and moved the wiring away about 10 inches from the 120v wire and tested out this theory. To my surprise the hum effect was almost completely gone.

    Thought I would share this fact and ask what everybody thought of this.

    Attached is Phase 1 of my HT Project, I'll post proper when done.
    Thanks
    Attached Images Attached Images  
    "I don't think it's nice, you laughing at my mule.
    You see my mule don't like people laughing. He gets the crazy idea you're laughing at him. Now if you apologize like I know you're going to, I might convince him that you really didn't mean it..."

  2. #2
    Forum Regular
    Join Date
    Nov 2003
    Posts
    1,720
    Quote Originally Posted by Ogeez
    I have discovered an issue with my speakers (wired to 16 and 18 g) where I heard a slight hum during a scene that was simply not producing sound. I never gave it much thought and had always beleived that it was the media at fault or the fact that I had the volume so loud that I was hearing the elctric current humming through the speakers.

    Well I had mentioned this during a conversation with a friend of mine who happens to be in the Audio business for the past 25 years and he told me to trace the speaker cables and make sure that any 120 volt wire running nearby (within 6 inches of the speaker wire) was not running parallel to the speaker wire. Sure enough I had my rear speaker wires running under the floor attached to the baement ceiling joists directly along-side an existing household 120v wire. I made the effort and moved the wiring away about 10 inches from the 120v wire and tested out this theory. To my surprise the hum effect was almost completely gone.

    Thought I would share this fact and ask what everybody thought of this.

    Attached is Phase 1 of my HT Project, I'll post proper when done.
    Thanks
    Yes, thanks. This gets overlooked at times. But, if you still can, try to separate it by at least 12", or more
    mtrycrafts

  3. #3
    Forum Regular Tony_Montana's Avatar
    Join Date
    Apr 2003
    Location
    Home
    Posts
    184
    Quote Originally Posted by mtrycraft
    Yes, thanks. This gets overlooked at times. But, if you still can, try to separate it by at least 12", or more
    So would you say that zip cord might not the best choice when it comes to protecting the system from outside noise?

    I think Ogeez's post is a good indication that if we want to combat outside interference, speaker wires must also be protected. May be we should look into Star-quad speaker wire design-or some other types of wire-that are more immune to noise in today's home environment where bunch of wires are going everywhere
    "Say Hello To My Little Friend."

  4. #4
    Forum Regular
    Join Date
    Nov 2003
    Posts
    1,720
    Quote Originally Posted by Tony_Montana
    So would you say that zip cord might not the best choice when it comes to protecting the system from outside noise?

    I think Ogeez's post is a good indication that if we want to combat outside interference, speaker wires must also be protected. May be we should look into Star-quad speaker wire design-or some other types of wire-that are more immune to noise in today's home environment where bunch of wires are going everywhere

    Special circumstances exist
    Twisted cables would help a lot here, yes
    mtrycrafts

  5. #5
    Forum Regular
    Join Date
    Nov 2002
    Posts
    490
    Quote Originally Posted by mtrycraft
    Twisted cables would help a lot here, yes
    Absolutely agree. Twisting them together will eliminate the 60 hz sensitivity, as well as transient pickups should the ac draw be switched.

    John

  6. #6
    Forum Regular Bill L's Avatar
    Join Date
    Dec 2001
    Posts
    78
    Here is an interesting link about noise picked up through wiring, including speaker cables. It's about RFI but seems like it should apply to 60hz in the power amp's feedback loop.
    http://www.antennex.com/shack/Dec99/beads.htm
    I've been trying these beads and they work great on the tv, little effect on my particular audio system, except to make it sound worse when stuck on the main amp's power cord.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Buying PSB? Read This!
    By IAmCanadian in forum Speakers
    Replies: 66
    Last Post: 09-08-2008, 05:55 AM
  2. Review of Bose 901s
    By sam_pro in forum Speakers
    Replies: 21
    Last Post: 06-06-2007, 07:31 AM
  3. speaker cables vs speaker wire
    By muzicman20003 in forum Cables
    Replies: 19
    Last Post: 03-08-2004, 04:56 AM
  4. Replies: 3
    Last Post: 02-15-2004, 10:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •