Results 1 to 9 of 9

Thread: Speaker Wire?

  1. #1
    Wheatland69
    Join Date
    Mar 2005
    Location
    Sidney NE.
    Posts
    27

    Lightbulb Speaker Wire?

    Okay, so how many of you are using 12 gauge? My question relates to the amount of copper wires, intwined behind the rubber core. Monster cable is what to 12 gauge wire? My front speakers are approximately 4.5 feet from my receiver, with the rears at 8 feet. Does one really need the expense of Monster cable? Is it that important to have as many copper wires, as one can get? Am I misinformed as to what Monster cable is? My old Sansui's just have the screw down cap. I have cut back the rubber approximately one inch,from the end of the wire, and inserted the bare part, into the post cap. I have noticed, that after a period of time, that the screw down, comes loose, and I can hear the difference between left and right. Not sure I understand that, must be the little gremlins living inside the speaker box......

  2. #2
    Bill L
    Join Date
    Jan 2006
    Location
    Southern Pennsylvania
    Posts
    185
    If your maximum speaker wire run is only 8 feet for the rears and 4 feet for the front, then your current 12 gauge wire is already in the overkill area. I would suggest you try and borrow some Monster cable and see if you can gleen any difference from your current speaker wire,

    Monster costs too much.

    Bill
    Music:
    Magnepan 1.6 QR's, upgraded xovers
    B&K 125.2 reference amp
    SONY SACD 2000ES
    Technics direct drive TT

    HT:
    Yamaha RX-V2500 receiver
    Bang&Olofsun Penta Surrounds
    SONY Bravia 46" HD LCD

  3. #3
    Suspended
    Join Date
    Mar 2002
    Location
    St. Louis, MO, USA
    Posts
    10,176
    The difference you hear between speakers is the bad connection when the thumb screw works loose. I'd suggest maybe getting a spade connector that will crimp onto the bare wire and then the spade should fit under the screw flat enough for you to tork it down and keep a good connection.

    My system definitely benefits from better speaker wire and the sound improvement is noticeable. I'd think with B&K and Maggies the benefit would be heard as well. But the best advice you did give, try it. Some systems may not have the resolution to show the differences or maybe some people aren't as critical in listening to discern any difference. I'm not a big fan of Monster myself but companies like Audioquest, Cardas, Siltech, Transparent etc offer some pretty good products. Budget minded can find good value in Maple Shade or Tributaries who offer products in Monster's price range, or cheaper, but give better performance.

  4. #4
    Suspended
    Join Date
    Oct 2005
    Posts
    928
    Different wire shouldn't make your speakers sound different. Just as drinking from a longer or larger diameter straw shouldn't make your drink taste different. That's not to say different speaker wires don't sound different, they just shouldn't. Good ones should be transparent and not add or subtract (color) anything from the original recording.

    Larger diameter wire has less resistance which means it's best suited for longer runs. Every wire has different levels of resistance, capacitance and inductance. When connected to your speakers they can change the values of your crossover network, thus changing the intended frequency response and crossover points of the speaker. Wire manufactureres attempt to control these parameters so any adverse effects fall outside the audio range.

    SInce you require very short wires you won't need larger guage wire. Also with very short runs your budget allows for experimentation. Try different wires at different cost points and let your ears be your guide. Listen without a salesman, so his comments won't affect your decision.

  5. #5
    I took a headstart... basite's Avatar
    Join Date
    Jul 2006
    Location
    Mortsel, Antwerp, Belgium, Europe, Earth
    Posts
    3,056
    I don't think you'll hear a big difference between standard 12 gauge cable and monster 12 gauge cable. I do think you'll hear a difference between standard 12 gauge cable and lessay, Kimber cables, like the 4VS or the 8VS, depending on how much power you're dumping in your speakers...

    Keep them spinning,
    Bert.
    Life is music!

    Mcintosh MA6400 Integrated
    Double Advent speakers
    Thiel CS2.3's
    *DIY Lenco L75 TT
    * SME 3012 S2
    * Rega RB-301
    *Denon DL-103 in midas body
    *Denon DL-304
    *Graham slee elevator EXP & revelation
    *Lehmann audio black cube SE
    Marantz CD5001 OSE
    MIT AVt 2 IC's
    Sonic link Black earth IC's
    Siltech MXT New york IC's
    Kimber 4VS speakercable
    Furutech powercord and plugs.

    I'm a happy 20 year old...

  6. #6
    Suspended
    Join Date
    Mar 2002
    Location
    St. Louis, MO, USA
    Posts
    10,176
    [QUOTE=bfalls]Different wire shouldn't make your speakers sound different. Just as drinking from a longer or larger diameter straw shouldn't make your drink taste different. That's not to say different speaker wires don't sound different, they just shouldn't. Good ones should be transparent and not add or subtract (color) anything from the original recording.

    Larger diameter wire has less resistance which means it's best suited for longer runs. Every wire has different levels of resistance, capacitance and inductance. When connected to your speakers they can change the values of your crossover network, thus changing the intended frequency response and crossover points of the speaker. Wire manufactureres attempt to control these parameters so any adverse effects fall outside the audio range]

    And what is our reference to tell which presentation is closest to the original recording? If a speaker connect takes your system closer to what you enjoy or gives a noticeable improvement then why not.

    A straw of different thickness of same material may not change the flavor but it changes how difficult or easy it is to drink. Take a straw of same, or different, thicknesses BUT different material (ie plastic vs glass vs metal) and then you may taste a difference.

    I can't tell you why speaker connects or interconnects sound different but I have found they do. Many of the changes are due to metalergy, or, the way the wire is wound, stretched or stranded, solid or many strands, variations of isolation and insulation etc.

    It's not to say that some companies wouldn't stoop to deception to make a buck. The best advice, and I think we all can agree, is to try it yourself. Some valid cables may have synergy with one system and not do much for another.

  7. #7
    test the blind blindly emorphien's Avatar
    Join Date
    Jan 2006
    Location
    Rochester, NY
    Posts
    919
    Having listened to many wires, there's not much difference and there really shouldn't be. Gauge in my experience is what matters most. If you've got a decent performing wire of a suitable gauge for your situation (which includes run length) then you'll likely be OK.

    Going back and forth between $30 and $8000 interconnects there were no appreciable differences that one could readily identify. Same goes for my experience with speaker wire, on a variety of systems, and it is mirrored by those that were with me (as much as the store wanted to sell us on wires we wouldn't be able to afford anyway).

    I have 11 gauge wires in my stereo, it's nice stuff but not exorbitantly priced. Listen to some things yourself and draw your own conclusion, don't let anyone convince you of anything because otherwise that's how we wind up with people ranting and raving about digital clocks with orange dots on them.

  8. #8
    stuck on vintage dingus's Avatar
    Join Date
    Nov 2005
    Location
    Graham, WA
    Posts
    341
    here's a good primer on speakers wire ...
    http://www.roger-russell.com/wire/wire.htm
    AR MGC-1, AR C225 PS, M&K V-1B, Pioneer VSX 47TX, Oppo BDP-83, Squeezebox v3, Vortexbox Appliance.

  9. #9
    Wheatland69
    Join Date
    Mar 2005
    Location
    Sidney NE.
    Posts
    27

    Smile

    Quote Originally Posted by Sansui71
    Okay, so how many of you are using 12 gauge? My question relates to the amount of copper wires, intwined behind the rubber core. Monster cable is what to 12 gauge wire? My front speakers are approximately 4.5 feet from my receiver, with the rears at 8 feet. Does one really need the expense of Monster cable? Is it that important to have as many copper wires, as one can get? Am I misinformed as to what Monster cable is? My old Sansui's just have the screw down cap. I have cut back the rubber approximately one inch,from the end of the wire, and inserted the bare part, into the post cap. I have noticed, that after a period of time, that the screw down, comes loose, and I can hear the difference between left and right. Not sure I understand that, must be the little gremlins living inside the speaker box......
    Okay, thanks guys. I thought that is was pretty simple, but needed some other input, to justify my conscience.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •