Results 1 to 9 of 9
  1. #1
    AR Newbie Registered Member
    Join Date
    May 2006
    Posts
    3

    Cool How to wiring for equalizer to reciever?

    Can anyone help me with wiring a audiolinear eq to a sony surround sound reciever? Would muchly appreciate any and all help!

  2. #2
    AR Newbie Registered Member
    Join Date
    May 2006
    Posts
    3
    Help!! Wiring is messing with me!

  3. #3
    Audio Hobbyist Since 1969 Glen B's Avatar
    Join Date
    Dec 2001
    Location
    New York
    Posts
    517
    Quote Originally Posted by whorehay
    Can anyone help me with wiring a audiolinear eq to a sony surround sound reciever? Would muchly appreciate any and all help!
    Didn't the equalizer come with instructions ? What model Sony receiver ? Hook up the receiver to a tape loop on the receiver. Plug the R + L inputs of the equalizer into the receiver's TAPE OUT jacks. Plug the R + L outputs of the equalizer into the TAPE IN jacks. Set the receiver's tape function to MONITOR or TAPE PLAY -- this will allow the signal from the receiver's input selector to be routed through the equalizer via the tape circuit. Note that the equalizer will only affect the front/main channels.
    Attached Images Attached Images

  4. #4
    Color me gone... Resident Loser's Avatar
    Join Date
    Mar 2004
    Location
    Nueva Jork
    Posts
    2,148

    Question is...

    Quote Originally Posted by Glen B
    Didn't the equalizer come with instructions ? What model Sony receiver ? Hook up the receiver to a tape loop on the receiver. Plug the R + L inputs of the equalizer into REC jacks of the receiver's tape loop. Plug the R + L outputs of the equalizer into the PLAY jacks of the receiver's tape loop. Set the receiver's tape function to MONITOR (tape play ?) -- this will allow the signal from the receiver's input selector to be routed through the equalizer via the tape circuit. Note that the equalizer will only affect the front/main channels.
    ...does his SONY have a true "Tape Mon" ckt? I don't mean just tape in and out jacks and a TAPE position on an input switch...Pre-outs and power-ins are another option, but with today's surround stuff they are also as rare as hen's teeth...Something labeled Processor Loop might be helpful...but as you rightly point out somebody should have the paperwork for both units...and surely it isn't us...

    jimHJJ(...model numbers might help tho'...)
    Hello, I'm a misanthrope...don't ask me why, just take a good look around.

    "Men would rather believe than know" -Sociobiology: The New Synthesis by Edward O. Wilson

    "The great masses of the people...will more easily fall victims to a great lie than to a small one" -Adolph Hitler

    "We are never deceived, we deceive ourselves" -Goethe

    If you repeat a lie often enough, some will believe it to be the truth...

  5. #5
    Audio Hobbyist Since 1969 Glen B's Avatar
    Join Date
    Dec 2001
    Location
    New York
    Posts
    517
    Quote Originally Posted by Resident Loser
    ...does his SONY have a true "Tape Mon" ckt? I don't mean just tape in and out jacks and a TAPE position on an input switch...Pre-outs and power-ins are another option, but with today's surround stuff they are also as rare as hen's teeth...Something labeled Processor Loop might be helpful...but as you rightly point out somebody should have the paperwork for both units...and surely it isn't us...

    jimHJJ(...model numbers might help tho'...)
    Well, tape circuit OUT jacks are usually always live. The circuit obviously must have an option to play a tape. When the source/tape switch is in the tape play position, the circuit is effectively the same as a processor loop.
    Attached Images Attached Images

  6. #6
    Suspended markw's Avatar
    Join Date
    Dec 2001
    Location
    Noo Joisey. Youse got a problem wit dat?
    Posts
    4,659

    Good point. It doesn't say "monitor". Big difference.

    Quote Originally Posted by Resident Loser
    ...does his SONY have a true "Tape Mon" ckt? I don't mean just tape in and out jacks and a TAPE position on an input switch...Pre-outs and power-ins are another option, but with today's surround stuff they are also as rare as hen's teeth...Something labeled Processor Loop might be helpful...but as you rightly point out somebody should have the paperwork for both units...and surely it isn't us...

    jimHJJ(...model numbers might help tho'...)
    Most modern tape receivers don't have a "Tape monitor" in the traditional sense in that actually "breaks" the signal continuity in the receiver.

    A true "tape monitor" would send the signal to a device via the "out" jack and then return it back into the receiver's signal chain by way of the "in" jack. If there was no device active, then depressing the "tape monitor" switch would cause silence. This was a really nifty feature when used with a three head tape deck (remember those?) so you could monitor (listen to) the actual signal being recorded on the tape and being played back simultaneously.

    The way modern receivers work, and somehow I think this fits here, is that while it may allow a signal to be sent out to an external device and a signal to be input to the receiver from said device, it's more of a one way trip both ways, where on the in and out have no direct relation to each other.

    Again, as Jim said, a pre-out and main-in insertion would work if your receiver allows.

  7. #7
    Suspended markw's Avatar
    Join Date
    Dec 2001
    Location
    Noo Joisey. Youse got a problem wit dat?
    Posts
    4,659

    Not necessarially.

    Quote Originally Posted by Glen B
    Well, tape circuit OUT jacks are usually always live.
    True that. It's a convenient way to send a two channel analog signal to external devices before the volume control.

    Quote Originally Posted by Glen B
    The circuit obviously must have an option to play a tape.
    Again, true that, but not necessarially in a "monitor" scenario, as I described in the above..

    Quote Originally Posted by Glen B
    When the source/tape switch is in the tape play position, the circuit is effectively the same as a processor loop.
    Well, here we differ. It's most likely just another high level input. If it's not a break in the signal path then it's not a true tape loop, and this would not work. In such case the eq would have no effect on the sound. Since it's not labelled "Tape Monitor" and having had experience with hooking tape recorders up to these new fangled receivers, my money is on this.

  8. #8
    Shostakovich fan Feanor's Avatar
    Join Date
    Jun 2002
    Location
    London, Ontario
    Posts
    8,127

    But not always

    Quote Originally Posted by Glen B
    Well, tape circuit OUT jacks are usually always live. The circuit obviously must have an option to play a tape. When the source/tape switch is in the tape play position, the circuit is effectively the same as a processor loop.

    To my extreme annoyance I discovered that Tape Out => processor => Tape In loop doesn't work that way on my Bel Canto eVo2i. When asked BCD how come, I got this unsatisfactory response ...
    "Mr. Bailey, as a safety feature, we don't allow TAPE IN and TAPE OUT to be used as a straight loop (processor loop). This has the potential to cause feedback and damage equipment (it's happened before). ..."

  9. #9
    Audio Hobbyist Since 1969 Glen B's Avatar
    Join Date
    Dec 2001
    Location
    New York
    Posts
    517
    Quote Originally Posted by markw
    True that. It's a convenient way to send a two channel analog signal to external devices before the volume control.

    Again, true that, but not necessarially in a "monitor" scenario, as I described in the above..

    Well, here we differ. It's most likely just another high level input. If it's not a break in the signal path then it's not a true tape loop, and this would not work. In such case the eq would have no effect on the sound. Since it's not labelled "Tape Monitor" and having had experience with hooking tape recorders up to these new fangled receivers, my money is on this.
    You're probably right. My multichannel receiver allows routing of sources the tape outs independent of the input selector but I have never used the feature and can't confirm whether it could work as a processor loop. My 2-channel preamp splits the tape circuit "old-school" style when the TAPE button is pressed.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •