Results 1 to 5 of 5
  1. #1
    AR Newbie Registered Member
    Join Date
    Dec 2014
    Posts
    2

    need component advice please

    I'm looking to build a fairly simple audio system and need advice on what components I still need to make it happen.

    My goals are to be able to play my Rega P1 record player into fairly ok speakers, to be able to watch movies with ok sound, and to wirelesly send music to the speakers via computer.

    The components I have right now are the record player, an ok blue-ray player, 42" plasma tv w/ ok speakers, computer, and a Bose Acoustimass floor bass speaker with RCA inputs for left, rear, and center channels (dated yes but I'm ok w/ it).

    What I think I still need to get is...2 top corner wall-mounted speakers for a fairly small listening area, a powered receiver or at least something like it to receive signal from a few sources (including bluetooth and/or wifi), and possibly a pre-amp and something else between my record player and receiver.

    One requirement of the receiver/amp would be when watching movies to only use the TV speakers plus Boss bass unit, and when listening to phono or computer wi-fi to use the new top corner speakers + Bose unit.

    Component wise I would lean toward pieces that are good quality but maybe have less options as my needs are fairly narrow and prob won't change. Would like to keep prices reasonable.

    I'm all ears whaddya think?

  2. #2
    Forum Regular blackraven's Avatar
    Join Date
    Nov 2006
    Location
    St. Paul, Minnesota
    Posts
    5,421
    The simplest thing to do would be to buy a HT receiver with a preamp out and buy a separate amp. The HT receiver would be used for TV and then the preamp out on the HT receiver would go to a separate 2 channel amp to drive the 2 speakers for music. Or you could just buy a budget HT receiver and then a separate 2ch receiver or integrated amp with a built in phono preamp for music. This may be the cheapest way to go as a HT receiver with a preamp out will set you back at least $600 and then you need to add a separate amp.

    Here is a nice HT receiver by Marantz that has every thing that you are looking for including preamp out and a phono input. It is a great buy at this price with all the features and Marantz quality. I don't think you will find anything better for the price.

    MARANTZ SR5009 7.2ch 100wpc 4K Receiver Wi-Fi/BT/AirPlay SALE REDUCED $80 | Accessories4less

    Emotiva sells some nice budget gear for a 2ch amp-

    https://emotiva.com/products/amplifiers/xpa-200

    For some good sounding budget speakers take a look at the new Elac B6's and the smaller B5's which were the rage of the Newport Audio show last summer-

    ELAC Debut B6 Bookshelf Speakers (Pr) at Music Direct

    Hope this helps some
    Pass Labs X250 amp, BAT Vk-51se Preamp,
    Thorens TD-145 TT, Bellari phono preamp, Nagaoka MP-200 Cartridge
    Magnepan QR1.6 speakers
    Luxman DA-06 DAC
    Van Alstine Ultra Plus Hybrid Tube DAC
    Dual Martin Logan Original Dynamo Subs
    Parasound A21 amp
    Vintage Luxman T-110 tuner
    Magnepan MMG's, Grant Fidelity DAC-11, Class D CDA254 amp
    Monitor Audio S1 speakers, PSB B6 speakers
    Vintage Technic's Integrated amp
    Music Hall 25.2 CDP
    Adcom GFR 700 AVR
    Cables- Cardas, Silnote, BJC
    Velodyne CHT 8 sub

  3. #3
    Suspended
    Join Date
    Mar 2002
    Location
    St. Louis, MO, USA
    Posts
    10,176
    I know you want to use the Bose but those having built in amps makes the set up you want a bit tricky. If you were just using all passive speakers something like the Cambridge Audio SR-20 would work great.

    Not only wanting to use the Bose, but also using the TV speakers presents an additional issue.

    I'm not sure if the Sr-20 has preamp outputs, a HT receiver with preamp outputs would get you close as he preamp outputs would connect to the Bose. Most HT receivers don't provide a phono input for turntable though. The SR-20 has phono stage and built in DAC for streaming.

    If the Bose would pass the signal through so it could go to the TV that would be ideal.

    See the Bose have amps so you don't need an amp there just a preamp signal, but the passive speakers you want up high will need an amp. Now, you could buy powered speakers for up high like the Audio Engine or Vanatu (hope I spelled tht right) then find a preamp with phono stage and DAC, something like a cheaper version of the Parasound P5. Or, maybe Emotiva's cheap A/V processor. If the Bose is a full system with bass and satelites, I'd just use them and forget the TV speakers.

    A thought, I personally would not use speakers up high for music. You want the speakers about even with your ears when in your normal seating position. Why not use the Bose for both music and movies?

    Polk Audio has come out with a new line I just saw in Home Theater Review that is budget priced and good value to compete with speakers like Elac and Pioneer, I can't remember the name of the line though.

  4. #4
    AR Newbie Registered Member
    Join Date
    Dec 2015
    Posts
    1
    Very interesting topic, Hello I am new here

  5. #5
    Forum Regular blackraven's Avatar
    Join Date
    Nov 2006
    Location
    St. Paul, Minnesota
    Posts
    5,421
    Quote Originally Posted by Dreamtry View Post
    Very interesting topic, Hello I am new here
    Welcome to AR!. Tell us about your gear.
    Pass Labs X250 amp, BAT Vk-51se Preamp,
    Thorens TD-145 TT, Bellari phono preamp, Nagaoka MP-200 Cartridge
    Magnepan QR1.6 speakers
    Luxman DA-06 DAC
    Van Alstine Ultra Plus Hybrid Tube DAC
    Dual Martin Logan Original Dynamo Subs
    Parasound A21 amp
    Vintage Luxman T-110 tuner
    Magnepan MMG's, Grant Fidelity DAC-11, Class D CDA254 amp
    Monitor Audio S1 speakers, PSB B6 speakers
    Vintage Technic's Integrated amp
    Music Hall 25.2 CDP
    Adcom GFR 700 AVR
    Cables- Cardas, Silnote, BJC
    Velodyne CHT 8 sub

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •