Results 1 to 25 of 25
Like Tree3Likes
  • 1 Post By ForeverAutumn
  • 2 Post By filecat13

Thread: Best ipod performance

  1. #1
    AR Newbie Registered Member
    Join Date
    Jan 2014
    Posts
    3

    Best ipod performance

    I have an NAD amplifier and a set of Triangle speakers. Works beautifully with my NAD CD player. But when I connect the ipod to the amp (even after recording the songs in the .wav extension) the quality of the sound is poor. What equipment (amp, speakers, preamp?) do you reccomend in order to have a high quality outcome using an ipod as the source of music? Thanks

  2. #2
    Super Moderator Site Moderator JohnMichael's Avatar
    Join Date
    Apr 2005
    Location
    Central Ohio
    Posts
    6,307
    Quote Originally Posted by rbaruac View Post
    I have an NAD amplifier and a set of Triangle speakers. Works beautifully with my NAD CD player. But when I connect the ipod to the amp (even after recording the songs in the .wav extension) the quality of the sound is poor. What equipment (amp, speakers, preamp?) do you reccomend in order to have a high quality outcome using an ipod as the source of music? Thanks

    Welcome to AR. I know nothing about iPods since I do not own one. Your NAD equipment and Triangle speakers sound so good together that I think the problem is with the iPod. I have seen iPod docks that are reported to improve the sound. I would not change your system but find something that will help the iPod.
    JohnMichael
    Vinyl Rega Planar 2, Incognito rewire, Deepgroove subplatter, ceramic bearing, Michell Technoweight, Rega 24V motor, TTPSU, FunkFirm Achroplat platter, Michael Lim top and bottom braces, 2 Rega feet and one RDC cones. Grado Sonata, Moon 110 LP phono.
    Digital
    Sony SCD-XA5400ES SACD/cd SID mat, Marantz SA 8001
    Int. Amp Krell S-300i
    Speaker
    Monitor Audio RS6
    Cables
    AQ SPKR and AQ XLR and IC

  3. #3
    Musicaholic Forums Moderator ForeverAutumn's Avatar
    Join Date
    Jan 2003
    Posts
    9,769
    I, on the other hand, don't know nearly as much as John when it comes to equipment, but know a little about iPod connections. How are you connecting the iPod to the amp?

    Does the amp have a dedicated iPod dock or are you using a cable connection? If a cable, what type of connection...through the headphone jack or a USB/iPod jack connector?

    My experience is that connecting to an amp through the iPod headphone jack does not provide sound as good as through a USB/iPod connection.

    Also, on your iPod, go into Settings and make sure that the Sound Check is Off. Having it on will compress all your files and they'll sound like crap.

    Lastly, you could try playing with the EQ settings on your iPod (also in Settings).
    JohnMichael likes this.

  4. #4
    AR Newbie Registered Member
    Join Date
    Jan 2014
    Posts
    3
    Thanks for the feedback. I am using the headphones jack to connect the ipod, I will need to find a dock and try it. Will also play with the settings in the ipod as suggested. I called a specialized store last week and they suggested I buy a preamp (they suggested a Rotel) to improve the conversion of the digital sound into analog, does this sound reasonable? Thanks again.

  5. #5
    Forum Regular filecat13's Avatar
    Join Date
    Feb 2003
    Location
    Los Angeles, CA
    Posts
    492

    Cool

    Generally with iPods, there are two ways to connect: 1) through the earphone jack, or 2) through the dock connector.

    With the earphone jack, you're always getting analog output that's been through the iPod's (pretty cheap) DAC, plus any tweaking you might have done with the iPod's internal EQ settings, etc. Even where you have the iPod's volume set will be reflected in the output signal. This will likely be the lowest quality of sound, even with higher resolution files.

    With the dock connector, there are two possibilities. One is just like routing the sound through the earphone jack, and the results will be the same low quality. Most iPod docks take the same analog signal through the dock out to the preamp, so the same (pretty cheap) DAC and any tweaking you've done still come into play.

    The second possibility is getting the digital signal out of the iPod, thus avoiding the iPod's internal DAC, the internal EQ, even the volume setting, and sending a digital stream to your own DAC for processing. There are a few iPod docks that can send this digital signal out, but most do not. Not surprisingly, the docks that can do this are more expensive, and they have to have Apple's permission (license) to do this.

    I have both set ups. I use nice Belkin and Kensington analog docks to for my iPod in various offices I use, but at home for serious listening, I use an HRT iStreamer (search for it) to extract the digital stream and run it through the iStreamer's built-in DAC. The sound is clearly superior. Wadia, Cambridge, and others make even more expensive iPod docks that will stream the digital content for you, but some don't have a DAC built in, so you have to provide your own. I find the iStreamer to be more than good enough for me.
    JohnMichael and ForeverAutumn like this.
    I like sulung tang.

  6. #6
    Big science. Hallelujah. noddin0ff's Avatar
    Join Date
    Mar 2004
    Location
    X
    Posts
    2,286
    What filecat13 said, plus another option...

    You can also go wireless. You can stream via wifi from the iPod to either Apple's AppleTV ($99) or Airport Express ($99) and pass the digital signal to your own DAC.

    Apple TV outputs via HDMI or optical (plus the AppleTV stuff)
    Airport Express also outputs digital optical (and can create or extend your wireless network)

    Both may be cheaper than a high end dock.
    TCA ATT GGA

  7. #7
    Forum Regular blackraven's Avatar
    Join Date
    Nov 2006
    Location
    St. Paul, Minnesota
    Posts
    5,421
    Most of your problem can be attributed to the fact that your are playing MP3 which sounds like crap through a stereo, especially a nice system as yours. Mp3 leaves out 30% of the information and sounds compressed, flat and lifeless on a good stereo system. You need to down load in wav or Flac files.
    Pass Labs X250 amp, BAT Vk-51se Preamp,
    Thorens TD-145 TT, Bellari phono preamp, Nagaoka MP-200 Cartridge
    Magnepan QR1.6 speakers
    Luxman DA-06 DAC
    Van Alstine Ultra Plus Hybrid Tube DAC
    Dual Martin Logan Original Dynamo Subs
    Parasound A21 amp
    Vintage Luxman T-110 tuner
    Magnepan MMG's, Grant Fidelity DAC-11, Class D CDA254 amp
    Monitor Audio S1 speakers, PSB B6 speakers
    Vintage Technic's Integrated amp
    Music Hall 25.2 CDP
    Adcom GFR 700 AVR
    Cables- Cardas, Silnote, BJC
    Velodyne CHT 8 sub

  8. #8
    Musicaholic Forums Moderator ForeverAutumn's Avatar
    Join Date
    Jan 2003
    Posts
    9,769
    Quote Originally Posted by blackraven View Post
    Most of your problem can be attributed to the fact that your are playing MP3 which sounds like crap through a stereo, especially a nice system as yours. Mp3 leaves out 30% of the information and sounds compressed, flat and lifeless on a good stereo system. You need to down load in wav or Flac files.
    His OP says he uses wav and they still sound like crap.

  9. #9
    Forum Regular blackraven's Avatar
    Join Date
    Nov 2006
    Location
    St. Paul, Minnesota
    Posts
    5,421
    Quote Originally Posted by ForeverAutumn View Post
    His OP says he uses wav and they still sound like crap.

    Oops! My bad!
    Pass Labs X250 amp, BAT Vk-51se Preamp,
    Thorens TD-145 TT, Bellari phono preamp, Nagaoka MP-200 Cartridge
    Magnepan QR1.6 speakers
    Luxman DA-06 DAC
    Van Alstine Ultra Plus Hybrid Tube DAC
    Dual Martin Logan Original Dynamo Subs
    Parasound A21 amp
    Vintage Luxman T-110 tuner
    Magnepan MMG's, Grant Fidelity DAC-11, Class D CDA254 amp
    Monitor Audio S1 speakers, PSB B6 speakers
    Vintage Technic's Integrated amp
    Music Hall 25.2 CDP
    Adcom GFR 700 AVR
    Cables- Cardas, Silnote, BJC
    Velodyne CHT 8 sub

  10. #10
    _ Luvin Da Blues's Avatar
    Join Date
    Jan 2007
    Location
    _
    Posts
    1,951
    Quote Originally Posted by ForeverAutumn View Post
    His OP says he uses wav and they still sound like crap.
    I hope he didn't just convert the Mp3's to .Wav expecting an improvement.
    Back in my day, we had nine planets.

  11. #11
    M.P.S.E /AES/SMPTE member Sir Terrence the Terrible's Avatar
    Join Date
    Jul 2002
    Posts
    6,826
    Quote Originally Posted by Luvin Da Blues View Post
    I hope he didn't just convert the Mp3's to .Wav expecting an improvement.
    Agreed. One you convert(or encode) a higher resolution signal into a lower resolution, any losses from that conversion are lost permanently. Encoding a lossy signal into a loss less format will not recover data that is already lost - it just presents lossy data bit for bit. That means no coding improvement at all.
    Sir Terrence

    Titan Reference 3D 1080p projector
    200" SI Black Diamond II screen
    Oppo BDP-103D
    Datastat RS20I audio/video processor 12.4 audio setup
    9 Onkyo M-5099 power amp
    9 Onkyo M-510 power amp
    9 Onkyo M-508 power amp
    6 custom CAL amps for subs
    3 custom 3 way horn DSP hybrid monitors
    18 custom 3 way horn DSP hybrid surround/ceiling speakers
    2 custom 15" sealed FFEC servo subs
    4 custom 15" H-PAS FFEC servo subs
    THX Style Baffle wall

  12. #12
    AR Newbie Registered Member
    Join Date
    Jan 2014
    Posts
    3
    Thanks to all for your feedback. I am going to purchase the istreamer and see how that works.

  13. #13
    Forum Regular filecat13's Avatar
    Join Date
    Feb 2003
    Location
    Los Angeles, CA
    Posts
    492
    Quote Originally Posted by rbaruac View Post
    Thanks to all for your feedback. I am going to purchase the istreamer and see how that works.
    Good luck. I hope it works as well for you as it does for me.
    I like sulung tang.

  14. #14
    Forum Regular
    Join Date
    Jun 2013
    Posts
    23
    If I'm not too late, I didn't see where you identified your NAD amp. I know that new D3020 has a built-in DAC with USB and Bluetooth compatibility, maybe others.

    I stream my iPod/iPad/iPhone wirelessly thru an AppleTV and then route the output to a Micromega MyDAC before sending it to my integrated amp. Works cool as hell and sounds pretty good, depending on the source material.

  15. #15
    Forum Regular
    Join Date
    Sep 2002
    Posts
    201
    Apple TV works very well as a streamer......my daughter uses one. For me I bypass the ipod unit and connect the PC which contains itunes (apple lossless) directly to a DAC with a digital cable.

  16. #16
    Forum Regular
    Join Date
    Jun 2013
    Posts
    23
    @Mingus, I'm set up the same way (the MyDAC has three switchable inputs), but the wireless streaming works so slick that I haven't played anything directly from the laptop in months. Although, I haven't tried streaming any really hi-rez stuff, yet. Been meaning to experiment, but time has just not allowed.

  17. #17
    Big science. Hallelujah. noddin0ff's Avatar
    Join Date
    Mar 2004
    Location
    X
    Posts
    2,286
    Quote Originally Posted by Unworthy View Post
    @Mingus, I'm set up the same way (the MyDAC has three switchable inputs), but the wireless streaming works so slick that I haven't played anything directly from the laptop in months. Although, I haven't tried streaming any really hi-rez stuff, yet. Been meaning to experiment, but time has just not allowed.
    I believe that the streaming output, and playback in general on the iPod is limited to 48hz 16bit. Could be limited to 44.1 (CD rate) but I think it's 48. So, no hi-rez.

    But, streaming in general is much more convenient than having to tether your iPhone or what have you to your system.
    TCA ATT GGA

  18. #18
    Forum Regular
    Join Date
    Jun 2013
    Posts
    23
    I don't try to stream Hi-rez from an iDevice. In the past I connected the PC directly to the DAC by USB cable for all of my music playback. With AppleTV, you use what they call Home Sharing. This connects your PC/Mac/NAS/whatever wirelessly to the Apple TV and I can use my iPod Touch or iPad or iPhone simply as a remote. I haven't tried this method to stream Hi-rez material yet, but I think the only limitation would be the speed of my wireless network which streams Netflix HD video without breaking a sweat.

  19. #19
    Forum Regular
    Join Date
    Sep 2002
    Posts
    201
    I also stream from this PC. I have a squeezebox touch connected to a DAC on my other system. The PC (itunes) streams music to this system wirelessly. So the PC is a source to two systems. The sound is very good on these systems....at least as good as a CD. My DACs....DACMagic and GF TubeDAC11 also have switchable inputs.

  20. #20
    Big science. Hallelujah. noddin0ff's Avatar
    Join Date
    Mar 2004
    Location
    X
    Posts
    2,286
    Quote Originally Posted by Unworthy View Post
    I don't try to stream Hi-rez from an iDevice. In the past I connected the PC directly to the DAC by USB cable for all of my music playback. With AppleTV, you use what they call Home Sharing. This connects your PC/Mac/NAS/whatever wirelessly to the Apple TV and I can use my iPod Touch or iPad or iPhone simply as a remote. I haven't tried this method to stream Hi-rez material yet, but I think the only limitation would be the speed of my wireless network which streams Netflix HD video without breaking a sweat.
    Apple devices (iPad, iPod, AppleTV, AirportExpress) should be limited to 48KB 16bit digital output regardless of path (wires/wireless)

    However, the optical output on any of the apple computers (hidden in the headphone jack) all will pass any high res signal if in readable formats e.g. AppleLossless. a $1.00 minjack to toslink adaptor and your set there.
    TCA ATT GGA

  21. #21
    Forum Regular
    Join Date
    Jun 2013
    Posts
    23
    I think I still wasn't totally clear. My iDevices are not even in the signal path for the wireless transmission when using the "Home Sharing" function. In my downstairs system (which is strictly 2.0), the wireless path is from the PC to the AppleTV via my home wireless network, the iDevices then serve only as remotes that control the functions of the AppleTV. Using the "Home Sharing" function allows me to access any other device (like my PC or iPad) on my home network for stored files. I then feed the digital coax and optical outputs of the AppleTV to both the TV and my stereo integrated amp via the DAC. My only point was that, if it works for HD video, I think it may work for hi-rez audio. That little AppleTV is a real Swiss army knife for routing signals.

    Having said all that, it's rather moot to the OP as he has chosen to go a little different direction.

  22. #22
    Big science. Hallelujah. noddin0ff's Avatar
    Join Date
    Mar 2004
    Location
    X
    Posts
    2,286
    Quote Originally Posted by Unworthy View Post
    I think I still wasn't totally clear. My iDevices are not even in the signal path for the wireless transmission when using the "Home Sharing" function. In my downstairs system (which is strictly 2.0), the wireless path is from the PC to the AppleTV via my home wireless network, the iDevices then serve only as remotes that control the functions of the AppleTV. Using the "Home Sharing" function allows me to access any other device (like my PC or iPad) on my home network for stored files. I then feed the digital coax and optical outputs of the AppleTV to both the TV and my stereo integrated amp via the DAC. My only point was that, if it works for HD video, I think it may work for hi-rez audio. That little AppleTV is a real Swiss army knife for routing signals.

    Having said all that, it's rather moot to the OP as he has chosen to go a little different direction.
    Check the signal that your DAC is actually receiving. Different signal formats are handled differently. Lossless audio as 2-channel PCM, which is how Apple's world shares audio and streams to the AppleTV is downsampled to 48kz 16bit, by the ATV if I'm not mistaken. I don't think the Airport Express even accepts a stream higher than 48/16. What is then relayed to your DAC via any output is no longer higher-rez.

    Other signal formats DD5.1 e.g. are handled differently.

    I'm not knocking you, your system or your plan. I have the same setup. Just being wonky and, hopefully, informative. If I'm wrong I'd love to know and would appreciate anyone telling me so. Let me know what your DAC says its getting. I'm curious.
    TCA ATT GGA

  23. #23
    Forum Regular
    Join Date
    Jun 2013
    Posts
    23
    noddinOff:

    No worries, I wasn't taking anything personally I was just, like you, in search of the facts here.

    It had not occurred to me that the AppleTV would downsample the signal to the DAC and I can't confirm one way of the other because my cheap little DAC doesn't tell me what it's seeing. It sounds like you understand the general nature of Apple products and I would not be surprised that you're right. I only have a handful of 24/96 files and I think they're all FLAC, which may be another problem. I just need to get around to TRYING it, but I just have not had any serious listening time since before the holidays.

  24. #24
    Big science. Hallelujah. noddin0ff's Avatar
    Join Date
    Mar 2004
    Location
    X
    Posts
    2,286
    Quote Originally Posted by Unworthy View Post
    noddinOff:

    No worries, I wasn't taking anything personally I was just, like you, in search of the facts here.

    It had not occurred to me that the AppleTV would downsample the signal to the DAC and I can't confirm one way of the other because my cheap little DAC doesn't tell me what it's seeing. It sounds like you understand the general nature of Apple products and I would not be surprised that you're right. I only have a handful of 24/96 files and I think they're all FLAC, which may be another problem. I just need to get around to TRYING it, but I just have not had any serious listening time since before the holidays.
    Yeah, most my experience is via the Apple ecosystem.

    I've long used Max (Max from sbooth.org) to convert from one format to another. I've noted that using Max to convert FLAC to Apple Lossless retains the resolution of the FLAC file in the AL file. You can look at the resolution by 'get info' within itunes. So you can take your 24/96 FLAC into iTunes without loss.

    However, the playback... Apple and iTunes is a bit opaque on how the playback is handled. To my knowledge there is no "pass through" option for regular 2-channel audio like there is for audio packaged in a video file. Basically, you can adjust some of the digital output specifications from an Apple computer via the 'Audio MIDI Setup' (I haven't updated my OS in a bit, still on 10.6.8) and this will upsample or downsample your signal as you specify. I've confirmed that the digital optical outputs what is specified. WiFi is a different beast.

    Audirvana Plus will work with iTunes as a high-res playback interface and will even play and convert DSD and SACD ISO files (if you can obtain them). Again this is via digital optical, not Wifi.

    However, I'll admit that I no longer chase the promise of high res files. With my gear, ears and attention I don't (reliably and confidently) hear a difference between 44.1/16 and higher-res versions of the same well mastered material. This is based on largely on infrequently listening to high-res material and downsampled versions of the same data. I still keep the high-res versions, but don't claim they're better to my ears.
    TCA ATT GGA

  25. #25
    Forum Regular
    Join Date
    Jun 2013
    Posts
    23
    Cool, even though that last response was at least 2 or 3 steps above my understanding :-) There is a lot I don't know about computers and technical aspects of digital music playback. Also with you about the need for hi-rez files. I really don't desire a system that will fully exploit the capabilities of a 24/96 file and not sure if my ears could discern the difference. I think there's a far greater advantage to be heard in well-recorded/mixed/mastered CDs. Makes me want to buy some new CDs. Never thought I would yearn for the simpler times of the '90s!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •