Results 1 to 16 of 16
  1. #1
    Suspended PeruvianSkies's Avatar
    Join Date
    Oct 2006
    Posts
    3,373

    VPI - Scoutmaster 2 & JMW-9T Standard VS. VPI - Scout 2 & JMW-9 Signature

    Does anyone have any opinions on which of these players would be better? As some of you are aware, my goal by this Christmas is to go with a dedicated 2-channel system that includes analogue setup. I have narrowed the choice down between these two, but it looks like the differences between these two is very minimal and that is why I ask for your opinions since I am new to this and many of you are experts in this area.

    Thanks in advance.

    PS. These are both VPI tables, the title of the post was messed up. Sorry.

  2. #2
    Super Moderator Site Moderator JohnMichael's Avatar
    Join Date
    Apr 2005
    Location
    Central Ohio
    Posts
    6,307
    I corrected the title of your thread. I was tempted to correct your spelling of analog. Unless you are Canadian or British.
    JohnMichael
    Vinyl Rega Planar 2, Incognito rewire, Deepgroove subplatter, ceramic bearing, Michell Technoweight, Rega 24V motor, TTPSU, FunkFirm Achroplat platter, Michael Lim top and bottom braces, 2 Rega feet and one RDC cones. Grado Sonata, Moon 110 LP phono.
    Digital
    Sony SCD-XA5400ES SACD/cd SID mat, Marantz SA 8001
    Int. Amp Krell S-300i
    Speaker
    Monitor Audio RS6
    Cables
    AQ SPKR and AQ XLR and IC

  3. #3
    Suspended PeruvianSkies's Avatar
    Join Date
    Oct 2006
    Posts
    3,373
    Quote Originally Posted by JohnMichael
    I corrected the title of your thread. I was tempted to correct your spelling of analog. Unless you are Canadian or British.
    I am Canadian, so thanks for the insult.

  4. #4
    Super Moderator Site Moderator JohnMichael's Avatar
    Join Date
    Apr 2005
    Location
    Central Ohio
    Posts
    6,307
    Quote Originally Posted by PeruvianSkies
    I am Canadian, so thanks for the insult.



    Oh I thought you were living in PA. Sorry.
    JohnMichael
    Vinyl Rega Planar 2, Incognito rewire, Deepgroove subplatter, ceramic bearing, Michell Technoweight, Rega 24V motor, TTPSU, FunkFirm Achroplat platter, Michael Lim top and bottom braces, 2 Rega feet and one RDC cones. Grado Sonata, Moon 110 LP phono.
    Digital
    Sony SCD-XA5400ES SACD/cd SID mat, Marantz SA 8001
    Int. Amp Krell S-300i
    Speaker
    Monitor Audio RS6
    Cables
    AQ SPKR and AQ XLR and IC

  5. #5
    Suspended PeruvianSkies's Avatar
    Join Date
    Oct 2006
    Posts
    3,373
    Quote Originally Posted by JohnMichael
    Oh I thought you were living in PA. Sorry.

    Oh ok...so everyone living in PA must be ...American? Even if I was born and raised in the U.S., the word "analog" can be spelled either way, both are correct.

  6. #6
    Music Junkie E-Stat's Avatar
    Join Date
    Dec 2003
    Posts
    5,462
    Quote Originally Posted by PeruvianSkies
    Does anyone have any opinions on which of these players would be better?
    I've owned a Scout (on an HW-2 isolation base) using a Souther TQ-1 arm for about six years and have heard both the HR-X and the Super Scoutmaster in a friend's exceptional system. The Scoutmaster's added mass and lower speed motor will help the bottom octaves while the Signature arm using Valhalla wire will help with resolution and focus. Since I'm not as much a bass freak, I would opt for the Scout table with the Signature arm. You may prefer the other set of priorities. On the other hand, if you have 150 large lying around, I've also heard the Clearaudio Statement in that same system where you don't have to compromise at all.

    VPI products will last forever. My HW-16 is going on 26.

    rw

  7. #7
    Suspended PeruvianSkies's Avatar
    Join Date
    Oct 2006
    Posts
    3,373
    Quote Originally Posted by E-Stat
    I've owned a Scout (on an HW-2 isolation base) using a Souther TQ-1 arm for about six years and have heard both the HR-X and the Super Scoutmaster in a friend's exceptional system. The Scoutmaster's added mass and lower speed motor will help the bottom octaves while the Signature arm using Valhalla wire will help with resolution and focus. Since I'm not as much a bass freak, I would opt for the Scout table with the Signature arm. You may prefer the other set of priorities. On the other hand, if you have 150 large lying around, I've also heard the Clearaudio Statement in that same system where you don't have to compromise at all.

    VPI products will last forever. My HW-16 is going on 26.

    rw
    E-Stat,

    Thank you very much, this is precisely the type of knowledge that I was looking for and I am glad you were able to help guide me with that. I am going to be doing more demoing on both of these units, I would really like to test them out with a few different amp configurations before making my final decision.

  8. #8
    Phila combat zone JoeE SP9's Avatar
    Join Date
    Jun 2003
    Location
    Philadelphia, PA
    Posts
    2,710
    My HW-19 has been going and going since 1987. It started out as a HW-19Jr. Over the years I've brought it up to full HW-19 specs (new platter, bearing etc, everything but the suspension). I like the Sorbothane pucks better. The SDS was the last addition.
    ARC SP9 MKIII, VPI HW19, Rega RB300
    Marcof PPA1, Shure, Sumiko, Ortofon carts, Yamaha DVD-S1800
    Behringer UCA222, Emotiva XDA-2, HiFimeDIY
    Accuphase T101, Teac V-7010, Nak ZX-7. LX-5, Behringer DSP1124P
    Front: Magnepan 1.7, DBX 223SX, 2 modified Dynaco MK3's, 2, 12" DIY TL subs (Pass El-Pipe-O) 2 bridged Crown XLS-402
    Rear/HT: Emotiva UMC200, Acoustat Model 1/SPW-1, Behringer CX2310, 2 Adcom GFA-545

  9. #9
    Super Moderator Site Moderator JohnMichael's Avatar
    Join Date
    Apr 2005
    Location
    Central Ohio
    Posts
    6,307
    From all that I have read I would consider the VPI Classic.

    http://www.vpiindustries.com/static....=table_classic
    JohnMichael
    Vinyl Rega Planar 2, Incognito rewire, Deepgroove subplatter, ceramic bearing, Michell Technoweight, Rega 24V motor, TTPSU, FunkFirm Achroplat platter, Michael Lim top and bottom braces, 2 Rega feet and one RDC cones. Grado Sonata, Moon 110 LP phono.
    Digital
    Sony SCD-XA5400ES SACD/cd SID mat, Marantz SA 8001
    Int. Amp Krell S-300i
    Speaker
    Monitor Audio RS6
    Cables
    AQ SPKR and AQ XLR and IC

  10. #10
    Byron
    Join Date
    Aug 2010
    Location
    Encino, CA
    Posts
    39
    I actually considered replacing my 20 year old AR turntable (circa 1983) with a VPI Scout but I backed out because I have been so happy with my AR turntable. I still wonder what type of major improvements there would be or would the sound just be different.
    Byron

  11. #11
    Music Junkie E-Stat's Avatar
    Join Date
    Dec 2003
    Posts
    5,462
    Quote Originally Posted by Byron4
    I still wonder what type of major improvements there would be or would the sound just be different.
    Are you using the standard AR tonearm?

    rw

  12. #12
    Byron
    Join Date
    Aug 2010
    Location
    Encino, CA
    Posts
    39
    No. I bought the turntable from GNP in Pasadena when Brooks Berdan was working there and I had them put on the Sumiko MMT tonearm which worked well with the Talisman S moving coil cartridge. I now use a Grado Platinum cartridge. This turntable has been totally maintenance free for 27 years as I have only replace the belts. I bought what I thought would be a lifetime supply of belts from a place called AB Tech when I was unsure of the availability after AR discontinued the turntables. I use the turntable on a regular basis and everything still runs like new.
    Byron

  13. #13
    Music Junkie E-Stat's Avatar
    Join Date
    Dec 2003
    Posts
    5,462
    Quote Originally Posted by Byron4
    I had them put on the Sumiko MMT tonearm which worked well with the Talisman S moving coil cartridge.
    Excellent. It was the arm that limited its performance.

    Quote Originally Posted by Byron4
    I bought what I thought would be a lifetime supply of belts from a place called AB Tech when I was unsure of the availability after AR discontinued the turntables.
    There is a source for belts to many old turntables including my 30+ year old Ariston found here.


    rw

  14. #14
    Byron
    Join Date
    Aug 2010
    Location
    Encino, CA
    Posts
    39
    There is a source for belts to many old turntables including my 30+ year old Ariston found here.


    rw[/QUOTE]

    Thanks, that's good to know after I go through my remaining belts. I am listening to my AR right now. I don't know if I am still getting the best from my AR because I installed the last few cartridges myself with an inexpensive Lyle protractor. I believe Ariston was the original Linn so the sound should be similar to my AR. How do these turntables compare to the VPI models?
    Byron

  15. #15
    Vinyl Fundamentalist Forums Moderator poppachubby's Avatar
    Join Date
    Aug 2009
    Location
    Analog Synagogue
    Posts
    4,363
    Quote Originally Posted by Byron
    Thanks, that's good to know after I go through my remaining belts. I am listening to my AR right now. I don't know if I am still getting the best from my AR because I installed the last few cartridges myself with an inexpensive Lyle protractor. I believe Ariston was the original Linn so the sound should be similar to my AR. How do these turntables compare to the VPI models?
    EStat actually owns both an Ariston and a VPI, and is qualified to answer your question. I would recommend having your table serviced by a professional if you are at all weary about doing it yourself. Bearings should definitely be lubed, suspension balanced, etc. I would also say that if you are unsure about your carts alignment, a pro could help you with this also. money well spent.

    I think while there are indeed differences, the VPI isn't necessarily "better". You have a nice arm/cart combo. With the table fully serviced, it's quite competetive.

    There is a school of thought regarding enjoyment of your equipment. If I can paraphrase the great 02audionoob...

    "...if you want to enjoy your gear, don't listen to anything that might be better."

    Capiche? Sounds like you're happy, why complicate that? I am running an Ariston RD-11S, and yes, along with the LP-12, they both used AR turntable data and research in their development.

  16. #16
    Music Junkie E-Stat's Avatar
    Join Date
    Dec 2003
    Posts
    5,462
    Quote Originally Posted by Byron4
    I don't know if I am still getting the best from my AR because I installed the last few cartridges myself with an inexpensive Lyle protractor.
    Perhaps you may be able to find an original Sumiko one.

    Quote Originally Posted by Byron4
    I believe Ariston was the original Linn so the sound should be similar to my AR. How do these turntables compare to the VPI models?
    You are quite correct. Hamish Robertson is the father of both. There is quite a similarity in the design with all these suspended platter tables. VPI has a range of models ranging in price from $900 to $10k, so I'll make some general comments. I found that moving to the entry level Scout provides a more neutral bass response than the Ariston as there's a tad of midbass thickness with it. As you move up the VPI product line, you get even better first octave response and with the SDS, better pitch consistency. While you can buy the tables without arms, they do make good arms as well. One makes it easy to fine tune VTA on the fly (never possible with my arm) and can optionally be wired with Nordost Valhalla.

    rw

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •