Results 1 to 17 of 17
  1. #1
    Forum Regular
    Join Date
    Mar 2004
    Posts
    10

    HELP! No sound on Yamaha HTR-5460

    No sound is coming from my Yamaha HTR-5460. It was working fine until one night I wanted to watch a DVD and no sound would come from the speakers. I noticed that a small "ps" is now appearing on the receiver's display. I've also noticed a small glitch (line) on the far left of the display that should not be there. I tested it with the tuner, the TV, a CD, and still no sound. I've had the receiver for about 2 years and it has been a great receiver. Any ideas on what could be causing this problem?

  2. #2
    Forum Regular TinHere's Avatar
    Join Date
    Nov 2003
    Location
    L.I., NY
    Posts
    288
    Quote Originally Posted by gutterpunk
    No sound is coming from my Yamaha HTR-5460. It was working fine until one night I wanted to watch a DVD and no sound would come from the speakers. I noticed that a small "ps" is now appearing on the receiver's display. I've also noticed a small glitch (line) on the far left of the display that should not be there. I tested it with the tuner, the TV, a CD, and still no sound. I've had the receiver for about 2 years and it has been a great receiver. Any ideas on what could be causing this problem?
    Try pressing the A/B speaker buttons, you may have changed the setting inadvertantly.

    Good luck.
    TinHere

    Enjoying a virtual life.

  3. #3
    Forum Regular
    Join Date
    Mar 2004
    Posts
    10
    I tried that and still had no luck. It seems like it is in some sort of protect mode where it won't output sound.

  4. #4
    Forum Regular TinHere's Avatar
    Join Date
    Nov 2003
    Location
    L.I., NY
    Posts
    288
    Quote Originally Posted by gutterpunk
    I tried that and still had no luck. It seems like it is in some sort of protect mode where it won't output sound.
    Try unplugging it and letting it reset.
    TinHere

    Enjoying a virtual life.

  5. #5
    Forum Regular
    Join Date
    Mar 2004
    Posts
    10
    Tried that as well. I think I need to do a complete reset of the system and the settings. Any idea on how to do that?

  6. #6
    Forum Regular TinHere's Avatar
    Join Date
    Nov 2003
    Location
    L.I., NY
    Posts
    288
    Quote Originally Posted by gutterpunk
    Tried that as well. I think I need to do a complete reset of the system and the settings. Any idea on how to do that?
    Oh oh, if it's beyond simple you may need real help. Leave it unplugged for 1/2 hr. and try again.

    Good luck.
    TinHere

    Enjoying a virtual life.

  7. #7
    Forum Regular
    Join Date
    Mar 2004
    Posts
    10
    Somebody just got me the steps to perform a Factory Reset. I'll try that and see if that solves the problem. Thanks for helping out!

  8. #8
    Forum Regular
    Join Date
    Mar 2004
    Posts
    10

    Still no Sound on Yamaha Receiver!!!

    Still looking for help on this problem. Factory reset did not solve the problem. I am just over the 2 year warranty and am afraid i may have to pay a lot for a repair. If anybody has any ideas, please let me know. Thanks!
    Last edited by gutterpunk; 03-07-2004 at 04:57 PM. Reason: Still looking for help

  9. #9
    AR Newbie Registered Member
    Join Date
    Mar 2004
    Posts
    3
    Quote Originally Posted by gutterpunk
    No sound is coming from my Yamaha HTR-5460. It was working fine until one night I wanted to watch a DVD and no sound would come from the speakers. I noticed that a small "ps" is now appearing on the receiver's display. I've also noticed a small glitch (line) on the far left of the display that should not be there. I tested it with the tuner, the TV, a CD, and still no sound. I've had the receiver for about 2 years and it has been a great receiver. Any ideas on what could be causing this problem?
    You might check to see if you accidentally invoked a tape monitor mode on the receiver. I've seen these symptoms before associated with that mode. The mode overrides sound from the selected source.

  10. #10
    Forum Regular
    Join Date
    Mar 2004
    Posts
    148

    start with the manual

    Quote Originally Posted by inner_ear
    You might check to see if you accidentally invoked a tape monitor mode on the receiver. I've seen these symptoms before associated with that mode. The mode overrides sound from the selected source.
    go to your owners manual, dig though it until you find out where it explains what the 'ps' stands for.

    I have an older JVC and just a couple of weeks ago I lost all of the sound. Turned out that I had just been pushing buttons in the dark and had set something in the avr that disabled the output to the speakers.

    Let me ask you this,,,,,, have you recently installed speakers ? new ? or moved yours?

    If you did re-ck your installation. One time I had my left main with one wire on speaker set 'a' and the other wire on speaker set 'b' .... the reciver went into protect mode and would not put out a sound. There was a display msg (I've forgotten what it was) and I didn't know what it meant. They way I found the problem was looking at the installation and just unhooked everything, one at a time. It was then that I saw the mis wire on the speaker was wired to both the A and B speaker channels......

    Good Luck, and don't forget to ck you manual for information

  11. #11
    Forum Regular
    Join Date
    Mar 2004
    Posts
    10
    i dug through my owners manual and even called Yamaha support to try to figure out what that "ps" meant, and had no luck at all. i unhooked everything from the receiver, performed the reset and the little "ps" was still appearing. after unhooking everything, i put 2 speakers on it, put it on the Tuner setting and attempted to get sound..and still nothing. i may just have to take it to a repair shop unless anybody else has an idea!? Thanks!

  12. #12
    Forum Regular
    Join Date
    Feb 2002
    Location
    Arlington, VA
    Posts
    197
    so the help line people had no idea what the ps meant? I have no idea what that could mean, that's kinda strange. You might be stuck having to go to a repair shop

  13. #13
    Forum Regular
    Join Date
    Mar 2004
    Posts
    10
    I think the repair shop is about the only thing I have left. I was trying anything I could to avoid it..but I think it is inevitable now. Thanks to everyone for trying to help out!

  14. #14
    Forum Regular TinHere's Avatar
    Join Date
    Nov 2003
    Location
    L.I., NY
    Posts
    288
    Quote Originally Posted by gutterpunk
    I think the repair shop is about the only thing I have left. I was trying anything I could to avoid it..but I think it is inevitable now. Thanks to everyone for trying to help out!
    One more question. Did you set the Yammie to Auto so it can determine what kind of signal it is getting?

    Good luck.
    TinHere

    Enjoying a virtual life.

  15. #15
    Forum Regular
    Join Date
    Mar 2004
    Posts
    10
    Yeah..i have it set to Auto. I talked to Yamaha Service and we bypassed the digital signals and went to analog. I was able to hear sound, but only on the default DVD setting. We narrowed it down to a problem with the DSP. Yamaha service is still trying to figure out the problem. They had mentioned to me that the "ps" that is appearing only appears on European models and somehow my reciever got into this mode. It's really weird....?

  16. #16
    Forum Regular
    Join Date
    Feb 2002
    Location
    Arlington, VA
    Posts
    197

    just curious

    where did you buy the reciever.

  17. #17
    Forum Regular
    Join Date
    Mar 2004
    Posts
    10
    I bought it at Best Buy..i just passed the 2 year warranty. I still have the reciepts and all that stuff. According to the Yamaha service dude, Yamaha is pretty lenient on the warranty, but said I would still have to pay for labor if I took it to a repair shop.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Denon 1602 vs. Yamaha RX-V440 ?
    By RandyClark in forum Home Theater/Video
    Replies: 8
    Last Post: 01-18-2005, 03:30 PM
  2. Onkyo Or Yamaha 2 Channel
    By Mark111867 in forum Amps/Preamps
    Replies: 1
    Last Post: 02-25-2004, 10:18 AM
  3. Problems with digital input to Yamaha RX-V1300
    By PmR in forum Home Theater/Video
    Replies: 2
    Last Post: 02-07-2004, 08:11 PM
  4. Got a question about a small philips sound system
    By skitallz in forum Home Theater/Video
    Replies: 7
    Last Post: 01-22-2004, 06:58 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •