Choosing the right cable/adapter

[Umphreak]

Hello
I have a Behringer AMP800, I want to connect my sound card(m-audio revolution 7.1) to one of the inputs on the behringer, but I am unsure of the best way to do this. The inputs on the AMP800 are two 6.3mm left/right, whereas the output on my soundcard is 3.5mm stereo.

I am getting conflicting information from two of my friends, one of them recommends this: Hosa 1/8 in. Stereo to Dual 1/4 in. Mono Cable http://www.zzounds.com/item--HOSCMP15 . My other friend claims this cable would not work, as it would simply give two mono signals, not a left channel and a right channel.


Any suggestions for other cables or help on this matter would be greatly appreciated.

[noddin0ff]

That's the wrong cable. It take's two mono's and sums them to one mono. You want them summed to one stereo. (in reverse, of course)

You need one with a 3.5mm (1/8") stereo end. You could do this
http://www.partsexpress.com/pe/showd...number=240-135
http://www.partsexpress.com/pe/showd...number=181-594

and then finish it off with two of these

http://www.partsexpress.com/pe/showd...number=090-285

good luck