Results 1 to 9 of 9
  1. #1
    Forum Regular
    Join Date
    Aug 2015
    Location
    Boston MA
    Posts
    148

    New sub - need some guidance

    I recently upgraded my integrated amp and, while shopping, came across a demo Focal SW800v subwoofer, which is the companion unit for my speakers. While it is rated only to 32hz @3db (27hz @6db), the price was right, the finish is an exact match to my speakers (WAF) and the seller was willing to let me return it if I do not like how it sounds.

    My new amp manual (Marantz PM 11S3) does not specifically discuss hooking up a sub for a 2 cannel setup, although has multiple diagrams for multi-channel. There are left/right pre out rca jacks which I plan to use. Some questions:

    I intend to place in the corner,which is about 8 feet away from the nearest speaker (speakers are about 7' apart), and about 13' from listening position. Should I position the speaker to fire straight out or pointed toward listener?

    Speaker cable run is about 20'. I need RCA jacks at both ends. Anything special I should consider before buying cables?

    My speakers (Focal 836v) are 3 way 8ohm rated down to 40hz @3db (33hz@6db). Crossovers are at 250hz/3000hz. When tested by Stereophile, these had a dip to 3.3ohms at around 110hz (one of the reasons I upgraded amp). Does any of this info give me insight as to where to set crossover for sub, or do I just go by ear?

    I know this is not the lowest dynamic range sub available, but it does put my system into the dynamic range of the next step up in the Focal line (Electra 1038BE) for a tiny fraction of the cost, and I do not intend to use this for anything other than music. I am hopeful that this sub has the Focal sound that drew me to their speakers in the first place.
    Marantz PM 11S3 Integrated Amp
    Marantz SA 8004 SACD Player
    Music Hall MMF 9.1 turntable
    Focal Chorus 836V speakers
    Focal Chorus SW 800v subwoofer
    Acoustic Zen Satori speaker cables
    AZ WOW interconnects
    AZ El Nino power cables
    VPI Turntable interconnect
    Sennheiser HD-700 headphones

  2. #2
    Forum Regular
    Join Date
    Aug 2015
    Location
    Boston MA
    Posts
    148
    My BJC subwoofer cables arrived. Also had tickets to my first concert of the fall (Lake Street Dive) and had a son needing to be picked up at the train at midnight. So I am just now listening to the new amp and subwoofer for the first time. As everyone is in bed, I decided to put on Nils Lofgren's "Acoustic Live". Love this album, but it has always sounded a little thin. Transformed! Not sure whether to attribute to sub or amp, but I have never enjoyed the full rich sound - even at very low listening levels. Will play with sub position at some point, but right now I am quite content.
    Marantz PM 11S3 Integrated Amp
    Marantz SA 8004 SACD Player
    Music Hall MMF 9.1 turntable
    Focal Chorus 836V speakers
    Focal Chorus SW 800v subwoofer
    Acoustic Zen Satori speaker cables
    AZ WOW interconnects
    AZ El Nino power cables
    VPI Turntable interconnect
    Sennheiser HD-700 headphones

  3. #3
    Suspended
    Join Date
    Mar 2002
    Location
    St. Louis, MO, USA
    Posts
    10,176
    With BJC you have a decent cable. You are correct that playing with position is necessary, no room or placement is usually the same.

    You will have to use your ear some but if your mains play down to 40Hz flat I'd start the sub around 40Hz, if it's 40Hz at 3dB down you may want to start at 80Hz. I personally would not run the sub as high as 110. Your sub should blend as to not be able to hear where it's at in the room.

  4. #4
    Forum Regular blackraven's Avatar
    Join Date
    Nov 2006
    Location
    St. Paul, Minnesota
    Posts
    5,421
    I would try crossing over the sub at 45hz and go up from there. The sub should blend seamlessly. It should definitely not be heard with bass shy music. The problem that people run into with subs is that they set them too loud and too high a crossover point. I like to run my speakers full range with the sub crossed over about 5 to ten hz above the lower end of the frequency range of my speakers. It sounds the most natural. But a lot depends upon sub placement, your rooms acoustics, main speakers and personal preferences. I feel that if the sub is to high you may get exaggerated bass.
    Last edited by blackraven; 10-12-2016 at 08:07 PM.
    Pass Labs X250 amp, BAT Vk-51se Preamp,
    Thorens TD-145 TT, Bellari phono preamp, Nagaoka MP-200 Cartridge
    Magnepan QR1.6 speakers
    Luxman DA-06 DAC
    Van Alstine Ultra Plus Hybrid Tube DAC
    Dual Martin Logan Original Dynamo Subs
    Parasound A21 amp
    Vintage Luxman T-110 tuner
    Magnepan MMG's, Grant Fidelity DAC-11, Class D CDA254 amp
    Monitor Audio S1 speakers, PSB B6 speakers
    Vintage Technic's Integrated amp
    Music Hall 25.2 CDP
    Adcom GFR 700 AVR
    Cables- Cardas, Silnote, BJC
    Velodyne CHT 8 sub

  5. #5
    Forum Regular
    Join Date
    Aug 2015
    Location
    Boston MA
    Posts
    148
    For whatever reason, it has been pretty easy to blend in the subwoofer with the mains. I have done a bit of trial and error and somewhere between 60-80hz seems to sound right to me. Loving the enhancement it has given to my system.

    Curious on your thoughts regarding 1 vs 2 subs. When properly dialed in, I have no real perception of sub's location in the soundstage - it just fills in the low frequencies without being directional. Yet I see many threads advocating for 2 subs, which seems to imply making them directional components in your system. My amp only has one set of pre-outs, so this is only hypothetical, but the 2 sub approach seems to be of marginal value at best, and possibly a contradiction to their basic design intent.
    Marantz PM 11S3 Integrated Amp
    Marantz SA 8004 SACD Player
    Music Hall MMF 9.1 turntable
    Focal Chorus 836V speakers
    Focal Chorus SW 800v subwoofer
    Acoustic Zen Satori speaker cables
    AZ WOW interconnects
    AZ El Nino power cables
    VPI Turntable interconnect
    Sennheiser HD-700 headphones

  6. #6
    Shostakovich fan Feanor's Avatar
    Join Date
    Jun 2002
    Location
    London, Ontario
    Posts
    8,127
    Quote Originally Posted by sjtm View Post
    For whatever reason, it has been pretty easy to blend in the subwoofer with the mains. I have done a bit of trial and error and somewhere between 60-80hz seems to sound right to me. Loving the enhancement it has given to my system.

    Curious on your thoughts regarding 1 vs 2 subs. When properly dialed in, I have no real perception of sub's location in the soundstage - it just fills in the low frequencies without being directional. Yet I see many threads advocating for 2 subs, which seems to imply making them directional components in your system. My amp only has one set of pre-outs, so this is only hypothetical, but the 2 sub approach seems to be of marginal value at best, and possibly a contradiction to their basic design intent.
    Generally it's considered that below 80 Hz sound is non-directional, thus is your crossover frequency is <= 80 Hz typically one subwoofer will do the job.

    Since this is audio, opinions differ. One sound pro who used to hang out at AR said the two (or more) subwoofers offered more consistent bass sound throughout the listening area. Also of course two subs can deliver more output if that's an issue. If you have neither of these issues one sub should be fine.

  7. #7
    Forum Regular blackraven's Avatar
    Join Date
    Nov 2006
    Location
    St. Paul, Minnesota
    Posts
    5,421
    Quote Originally Posted by sjtm View Post
    For whatever reason, it has been pretty easy to blend in the subwoofer with the mains. I have done a bit of trial and error and somewhere between 60-80hz seems to sound right to me. Loving the enhancement it has given to my system.

    Curious on your thoughts regarding 1 vs 2 subs. When properly dialed in, I have no real perception of sub's location in the soundstage - it just fills in the low frequencies without being directional. Yet I see many threads advocating for 2 subs, which seems to imply making them directional components in your system. My amp only has one set of pre-outs, so this is only hypothetical, but the 2 sub approach seems to be of marginal value at best, and possibly a contradiction to their basic design intent.

    I went to 2 subs several months ago and I am glad I did. The sound stage became wider and deeper. The 2 subs lend a fullness to the music better than 1 sub. It is not a dramatic change but it is very noticeable. My room is 17x17. I am going to have a friend come over and analyze the bass to dial them in.

    I have a friend that has a Rhythmik sub and just added a second and his experience shadows mine. His room is much smaller than mine and uses the subs in a near field set up with Magnepan 1.7 speakers.

    Larry
    Last edited by blackraven; 10-17-2016 at 09:21 AM.
    Pass Labs X250 amp, BAT Vk-51se Preamp,
    Thorens TD-145 TT, Bellari phono preamp, Nagaoka MP-200 Cartridge
    Magnepan QR1.6 speakers
    Luxman DA-06 DAC
    Van Alstine Ultra Plus Hybrid Tube DAC
    Dual Martin Logan Original Dynamo Subs
    Parasound A21 amp
    Vintage Luxman T-110 tuner
    Magnepan MMG's, Grant Fidelity DAC-11, Class D CDA254 amp
    Monitor Audio S1 speakers, PSB B6 speakers
    Vintage Technic's Integrated amp
    Music Hall 25.2 CDP
    Adcom GFR 700 AVR
    Cables- Cardas, Silnote, BJC
    Velodyne CHT 8 sub

  8. #8
    Forum Regular
    Join Date
    Aug 2015
    Location
    Boston MA
    Posts
    148
    Quote Originally Posted by Feanor View Post
    Generally it's considered that below 80 Hz sound is non-directional, thus is your crossover frequency is <= 80 Hz typically one subwoofer will do the job.

    Since this is audio, opinions differ. One sound pro who used to hang out at AR said the two (or more) subwoofers offered more consistent bass sound throughout the listening area. Also of course two subs can deliver more output if that's an issue. If you have neither of these issues one sub should be fine.
    According to Focal spec sheet, the initial crossover is at 250hz. What effect does that have on selection of appropriate crossover setting for the sub?
    Marantz PM 11S3 Integrated Amp
    Marantz SA 8004 SACD Player
    Music Hall MMF 9.1 turntable
    Focal Chorus 836V speakers
    Focal Chorus SW 800v subwoofer
    Acoustic Zen Satori speaker cables
    AZ WOW interconnects
    AZ El Nino power cables
    VPI Turntable interconnect
    Sennheiser HD-700 headphones

  9. #9
    Suspended
    Join Date
    Mar 2002
    Location
    St. Louis, MO, USA
    Posts
    10,176
    The 250Hz is where Focal crosses the bass driver from the midrange, this has nothing to do with how you set your sub. You want to look at the speaker's frequency response to see where the low end extends to and how many dB down, it will say +/- so many dB.

    The 836v looks to be 40Hz at 3dB down, so run the sub's crossover between 40 & 80Hz to see where it blends best. I think anything above 80Hz would cause too much overlap and not blend well.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •