Results 1 to 11 of 11
  1. #1
    AR Newbie Registered Member
    Join Date
    Dec 2006
    Posts
    4

    No Dolby Digital Signal...

    I just bought a HK AVS245 receiver, I have my XBOX hooked up through a optical connection and it plays full Dolby Digital sound. I have a Sony 5-Disc changer ( that does DTS, DD, etc) and when I play a DVD through there it doesnt show or auto detect in Dolby Digital sound. I have the dvd hooked through a digital coax conection. I ran EZSET on the speakers and it finds some here and there and gives different reports all the time. Can someone shed some light on this? Im fairly new at the HT world..thanks

  2. #2
    Crackhead Extraordinaire Dusty Chalk's Avatar
    Join Date
    Nov 2003
    Location
    below the noise floor
    Posts
    3,636
    Sounds like it should work. Tell us more.

    The only thing I can think of is go through the menu of the Sony changer to see if you accidentally have digital out turned off or something.
    Eschew fascism.
    Truth Will Out.
    Quote Originally Posted by stevef22
    you guys are crackheads.
    I remain,
    Peter aka Dusty Chalk

  3. #3
    Loving This kexodusc's Avatar
    Join Date
    Nov 2003
    Location
    Department of Heuristics and Research on Material Applications
    Posts
    9,025
    I agree with Dusty - sounds like a goofy setting somewhere (there's a bunch of 'em) hasn't been activated. Make sure the bitstream and PCM setting in the DVD player are correct.
    Some receivers need to know what what inputs to read for which sources, make sure your receiver knows it should be reading.

  4. #4
    AR Newbie Registered Member
    Join Date
    Dec 2006
    Posts
    4
    Ok I'll check into that, my Media Center PC also doesnt play in DD..I thought the receiver was supposed to decode the signals then send them out to the speakers? I guess thats not the case....I'll let you know when I find out more..thanks!

  5. #5
    Crackhead Extraordinaire Dusty Chalk's Avatar
    Join Date
    Nov 2003
    Location
    below the noise floor
    Posts
    3,636
    Quote Originally Posted by ddayton217
    ..I thought the receiver was supposed to decode the signals then send them out to the speakers?
    Should.
    Eschew fascism.
    Truth Will Out.
    Quote Originally Posted by stevef22
    you guys are crackheads.
    I remain,
    Peter aka Dusty Chalk

  6. #6
    Forum Regular
    Join Date
    Dec 2006
    Posts
    44
    Sounds to me like you have not yet assigned the digital input to specific types/numbers.

    Dvd is defaulted to Coaxial 1 input when your receiver comes out of the box, however it could have been changed at some point so you need to check it anyway. These settings are not manipulated by EZset. which handles speaker settings only. You will need to go further into the installation menu to assign the inputs.

    I'll also mention that while you will get dolby digital surround out of your linear bitstream SPDIF, (coaxial digital), you will not get DTS out of it. An optical connection is required for that lil widget to work. so you might want to consider hooking it up with optical if you want DTS as opposed to Pro Logic Cinema.

    Most dvd players have a setting in thier setup where you can change the digital out of the device to be Linear Bistream, Dolby Digital, or Off. This setting can be a pain in the butt to get to, as not all remotes have a "settings" or "setup" button dedicated. I have found a few models of Sony's which require the display button to be pressed while there is no disc in the machine... annoying, yeah?...

    Anyway you will want to get into that and goto custom setup as opposed to quick and make sure its set up for bitstream if you are going to use coaxial, Dolby Digital if you are going to use optical...

    For step by step assistance with setting up your input assigments on your HK receiver, refer to pages 32, 33 in your manual, or follow this link to it.

    http://manuals.harman.com/HK/Owner%2...5om-LowRes.pdf

    Hope that helps.

  7. #7
    Oldest join date recoveryone's Avatar
    Join Date
    Jan 1970
    Location
    California
    Posts
    1,435
    "I'll also mention that while you will get dolby digital surround out of your linear bitstream SPDIF, (coaxial digital), you will not get DTS out of it. An optical connection is required for that lil widget to work. so you might want to consider hooking it up with optical if you want DTS as opposed to Pro Logic Cinema."
    Not sure where you got thet bit of information, Coaxial and optical are the same as to sending the signal from a DVD or any other source to a receiver. If he is not getting a DTS or DD signal it should be in the menu settings or a problem with the receiver. Since he gets the DD/DTS sometimes it sounds more like a short in the DSP board of the unit.

    I used both Coax and Optical on my units and never had a issue about getting a DD/DTS signal.
    HT
    Pioneer Elite SC lx502
    Pioneer Elite N50
    Pioneer Cassette CTM66R
    Pioneer Elite BDP 85FD

    Vizio P series 2160p
    Panamax 5300 EX

  8. #8
    Crackhead Extraordinaire Dusty Chalk's Avatar
    Join Date
    Nov 2003
    Location
    below the noise floor
    Posts
    3,636
    Good catch, I missed that -- yeah, there's no reason that DTS can't normally go out across coax.
    Eschew fascism.
    Truth Will Out.
    Quote Originally Posted by stevef22
    you guys are crackheads.
    I remain,
    Peter aka Dusty Chalk

  9. #9
    Forum Regular Blue Meanie's Avatar
    Join Date
    Dec 2003
    Location
    Wisconsin
    Posts
    134
    Quote Originally Posted by Daedilus
    Anyway you will want to get into that and goto custom setup as opposed to quick and make sure its set up for bitstream if you are going to use coaxial, Dolby Digital if you are going to use optical...
    Wouldn't the output signal of the DVD player be set up the SAME whether digital coax or optical is being used?

    Jeff
    Last edited by Blue Meanie; 12-30-2006 at 03:46 AM.
    PIONEER: SX-780, CT-F700, HPM-100(x4), DV-C302D, PD-F1007, PL-514; DENON: AVR-983; SONY: D-15, DVP-985V, DVP-CX860(x2); TOSHIBA: XR-9459; TECHNICS: SL-1800MK2, SL-1700MK2, SL-1400MK2; NAD: PE2200; PARADIGM REFERENCE: STUDIO 100 V.2, SERVO-15, X-30; CERWIN-VEGA: DX-9; REALISTIC: MACH 2; RCA: 42" LCD HDTV

  10. #10
    Oldest join date recoveryone's Avatar
    Join Date
    Jan 1970
    Location
    California
    Posts
    1,435
    yes it would blue
    HT
    Pioneer Elite SC lx502
    Pioneer Elite N50
    Pioneer Cassette CTM66R
    Pioneer Elite BDP 85FD

    Vizio P series 2160p
    Panamax 5300 EX

  11. #11
    Forum Regular Blue Meanie's Avatar
    Join Date
    Dec 2003
    Location
    Wisconsin
    Posts
    134
    I guess some folks feel that erroneous advice is better than no advice...
    PIONEER: SX-780, CT-F700, HPM-100(x4), DV-C302D, PD-F1007, PL-514; DENON: AVR-983; SONY: D-15, DVP-985V, DVP-CX860(x2); TOSHIBA: XR-9459; TECHNICS: SL-1800MK2, SL-1700MK2, SL-1400MK2; NAD: PE2200; PARADIGM REFERENCE: STUDIO 100 V.2, SERVO-15, X-30; CERWIN-VEGA: DX-9; REALISTIC: MACH 2; RCA: 42" LCD HDTV

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •