Page 1 of 2 1 2 LastLast
Results 1 to 25 of 29
  1. #1
    Forum Regular
    Join Date
    Mar 2006
    Posts
    90

    What is secret/s of Theatres

    i have the 6.1 definitive speaker system and Pioneer Receiver,but i wonder that why i can't hear the same or close sound as the theatres,cause when i watch my movie,basses slaps my face,not just hear them also feel them,

    my system is like below


    Definitive

    BP7006's front
    C/L/R 1000B center
    BP2X surrounds
    BP10B back surround
    PF15TL+

  2. #2
    Horn lover
    Join Date
    Mar 2006
    Location
    S Cal
    Posts
    35
    Ah the downfall of a Mismatched system. To get the same sound quality of a movie theater, (my sound is much better) you need to MOVE AIR and LOTS OF IT. A powered sub in the range of 1000w or more in the average size room should start to get you feeling some of the lower registers. However, the sub needs to be matched to your speakers so there is a seamless handoff from the speakers to the sub. The best speakers in the world will sound like crap if you drive them with crap so you need to get a good pre pro to drive them with. As a start, you will be looking at a mid line or better name brand receiver. Yamaha, Onkyo, Dennon, Pioneer etc. If the MSRP of the receiver is less than $500, the unit might be suspect, then again, this is assuming that you have purchased quality speakers. A base price for speakers might start at MSRP of $700 per pair.

    Don’t take the above to only say you need to spend some serious cash to get a high quality setup (though it does and you do) You need to think out the system and buy quality components. You can save lots of money by buying used, or floor demo units.

    You might also want to kick up the quality of the feeling by installing “butt kickers” these are basically “speakers” that transmit the vibrations of bass to your chair, thus helping you to “feel” the sound. These will of course, require their own amps.

    There is no shortcut to audio nirvana. You can settle for what you have or a HTIB setup with “cube” speakers that cost Bloes pennies to make and sell for BIG BUCKS, or you can step up to the plate and get serious. The choice is yours and you must be happy with the results, again, your choice.

    Room placement has lots to do with the results also, not to mention sonic room treatments. Your equipment seems like it should be up to the task but perhaps it needs to be moved around a little to make the most of it. I have no hands on experence with your equipment but lots with other brands. I prefer to have seperate sub/speakers so I can't help you with proper placement of your units. Good luck.
    Last edited by Cal Blacksmith; 03-21-2006 at 01:39 PM.

  3. #3
    M.P.S.E /AES/SMPTE member Sir Terrence the Terrible's Avatar
    Join Date
    Jul 2002
    Posts
    6,826
    Quote Originally Posted by Cal Blacksmith
    Ah the downfall of a Mismatched system. To get the same sound quality of a movie theater, (my sound is much better) you need to MOVE AIR and LOTS OF IT. A powered sub in the range of 1000w or more in the average size room should start to get you feeling some of the lower registers. However, the sub needs to be matched to your speakers so there is a seamless handoff from the speakers to the sub. The best speakers in the world will sound like crap if you drive them with crap so you need to get a good pre pro to drive them with. As a start, you will be looking at a mid line or better name brand receiver. Yamaha, Onkyo, Dennon, Pioneer etc. If the MSRP of the receiver is less than $500, the unit might be suspect, then again, this is assuming that you have purchased quality speakers. A base price for speakers might start at MSRP of $700 per pair


    Don’t take the above to only say you need to spend some serious cash to get a high quality setup (though it does and you do) You need to think out the system and buy quality components. You can save lots of money by buying used, or floor demo units.

    You might also want to kick up the quality of the feeling by installing “butt kickers” these are basically “speakers” that transmit the vibrations of bass to your chair, thus helping you to “feel” the sound. These will of course, require their own amps.

    There is no shortcut to audio nirvana. You can settle for what you have or a HTIB setup with “cube” speakers that cost Bloes pennies to make and sell for BIG BUCKS, or you can step up to the plate and get serious. The choice is yours and you must be happy with the results, again, your choice.

    Room placement has lots to do with the results also, not to mention sonic room treatments. Your equipment seems like it should be up to the task but perhaps it needs to be moved around a little to make the most of it. I have no hands on experence with your equipment but lots with other brands. I prefer to have seperate sub/speakers so I can't help you with proper placement of your units. Good luck.
    No disrespect to ya man, but this gentlemen does have a seperate sub in his system. His system is matched, and a 1000watt sub is an overkill of epic proportion in a average size room. Equidistant placement, calibration, and frequency correction in the sub should be his first tasks. His equipment is fully capable of giving him the "theater" sound if this is done.
    Sir Terrence

    Titan Reference 3D 1080p projector
    200" SI Black Diamond II screen
    Oppo BDP-103D
    Datastat RS20I audio/video processor 12.4 audio setup
    9 Onkyo M-5099 power amp
    9 Onkyo M-510 power amp
    9 Onkyo M-508 power amp
    6 custom CAL amps for subs
    3 custom 3 way horn DSP hybrid monitors
    18 custom 3 way horn DSP hybrid surround/ceiling speakers
    2 custom 15" sealed FFEC servo subs
    4 custom 15" H-PAS FFEC servo subs
    THX Style Baffle wall

  4. #4
    Forum Regular
    Join Date
    Mar 2006
    Posts
    90
    Quote Originally Posted by Cal Blacksmith
    Ah the downfall of a Mismatched system. To get the same sound quality of a movie theater, (my sound is much better) you need to MOVE AIR and LOTS OF IT. A powered sub in the range of 1000w or more in the average size room should start to get you feeling some of the lower registers. However, the sub needs to be matched to your speakers so there is a seamless handoff from the speakers to the sub. The best speakers in the world will sound like crap if you drive them with crap so you need to get a good pre pro to drive them with. As a start, you will be looking at a mid line or better name brand receiver. Yamaha, Onkyo, Dennon, Pioneer etc. If the MSRP of the receiver is less than $500, the unit might be suspect, then again, this is assuming that you have purchased quality speakers. A base price for speakers might start at MSRP of $700 per pair.

    Don’t take the above to only say you need to spend some serious cash to get a high quality setup (though it does and you do) You need to think out the system and buy quality components. You can save lots of money by buying used, or floor demo units.

    You might also want to kick up the quality of the feeling by installing “butt kickers” these are basically “speakers” that transmit the vibrations of bass to your chair, thus helping you to “feel” the sound. These will of course, require their own amps.

    There is no shortcut to audio nirvana. You can settle for what you have or a HTIB setup with “cube” speakers that cost Bloes pennies to make and sell for BIG BUCKS, or you can step up to the plate and get serious. The choice is yours and you must be happy with the results, again, your choice.

    Room placement has lots to do with the results also, not to mention sonic room treatments. Your equipment seems like it should be up to the task but perhaps it needs to be moved around a little to make the most of it. I have no hands on experence with your equipment but lots with other brands. I prefer to have seperate sub/speakers so I can't help you with proper placement of your units. Good luck.

    mismatched system?what do u mean?

    my Receiver costs $1500

    what is your system then?

  5. #5
    M.P.S.E /AES/SMPTE member Sir Terrence the Terrible's Avatar
    Join Date
    Jul 2002
    Posts
    6,826
    Quote Originally Posted by abulgan
    i have the 6.1 definitive speaker system and Pioneer Receiver,but i wonder that why i can't hear the same or close sound as the theatres,cause when i watch my movie,basses slaps my face,not just hear them also feel them,

    my system is like below


    Definitive

    BP7006's front
    C/L/R 1000B center
    BP2X surrounds
    BP10B back surround
    PF15TL+
    My first suggestion to you is to check the placement of your speakers. Each speaker should be equal distance from the listening position, or electronically corrected for equi-distant placment using delay. Your surrounds should be directly to the sides of the listening position. Sub should be located in the corners, and adjusted in or out to get a correct balance. Secondly the whole system should be correctly calibrated using a SPL meter, and your receiver internal test tones. Your sub should be frequency corrected (no sub will have a smooth response in any room) using test tones, aquiring a parametric EQ, and dialing in filters for correction. Once you do these things, you will be surprised at the "theater" like quality you can attain from your system.
    Sir Terrence

    Titan Reference 3D 1080p projector
    200" SI Black Diamond II screen
    Oppo BDP-103D
    Datastat RS20I audio/video processor 12.4 audio setup
    9 Onkyo M-5099 power amp
    9 Onkyo M-510 power amp
    9 Onkyo M-508 power amp
    6 custom CAL amps for subs
    3 custom 3 way horn DSP hybrid monitors
    18 custom 3 way horn DSP hybrid surround/ceiling speakers
    2 custom 15" sealed FFEC servo subs
    4 custom 15" H-PAS FFEC servo subs
    THX Style Baffle wall

  6. #6
    Suspended topspeed's Avatar
    Join Date
    Jun 2003
    Location
    California
    Posts
    3,717
    I agree with SirT.

    Your rig is fine, it just needs to be tuned to your room. Your mains are bipolar which mean:
    1) You have to be very careful with where you place them if you want their full measure
    2) That placement is going to likely be fairly out into the room.

    Pay attention to how the rig is interacting with the room. That's sub should be plenty unless you're a bassaholic, so try moving it into the corners to get some reinforcement. This may not give you the most accurate bass, but it will likely feel a lot more powerful. Like T said, you can also get an EQ such as a Behringer Feedback Destroyer ($100) to help even things out.

    After all that, if you were really looking for dynamics that will trigger an involuntary bowel movement, you should have bought some Altec Voice of the Theaters and been done with it.


  7. #7
    Forum Regular Woochifer's Avatar
    Join Date
    Dec 2001
    Location
    SF Bay Area
    Posts
    6,883
    As Terrence said, rounding up the equipment is only the starting point. Just as important is getting everything setup correctly. That entails speaker placement, proper level matching, getting the processor/receiver settings right, and optimizing the low frequencies around issues with the room dimensions/acoustical properties.

    In actuality, a home theater should be able to produce much higher sound quality than at a typical movie theater because 1) you can optimize the speaker alignment to your listening position; 2) the surround effect on 5.1 DVDs is often remixed to create a more immersive and directional sound effect than the more diffused effect that theatrical surround arrays create; 3) with a smaller room, you can go with speakers that have more even and balanced tonal characteristics than typical theatrical screen speakers, which have to be designed to deliver a higher maximum output; 4) a smaller room can create much stronger bass reinforcement, if the room acoustics allow.

    The speaker placement that you should try to start with is shown below. That's the ITU reference speaker alignment, and because it's commonly used in studio settings, you run a pretty good chance of this alignment producing an optimal surround effect.



    Dolby's guidelines suggest that if you use your surrounds for both music and movies, you should elevate the surround speakers about 2' above ear level and pointed directly at one another. This gives you a pretty good diffusion for older movie soundtracks that primarily use the surround tracks for ambient and environmental sounds, while preserving the deliberate imaging cues in the surrounds that get mixed into newer movie soundtracks and multichannel music. In my tweaking, I've found that going about 1' above ear level works fine.

    In your system, you might have a problem with the back surrounds blending in with the other surround speakers because it looks like you're using bipolar tower speakers.

    Getting the bass right is difficult in a small to medium sized room because the longer wave lengths on low frequencies will create interactions that will alternately boost and cancel out the bass at different frequencies, AND these effects will vary by location within the room. For your system, you have powered subs on your front tower speakers PLUS a 15" powered sub. There's no reason whatsoever that you shouldn't be able to create enough bass to blow your hair back.

    I strongly suggest that you go to Radio Shack and buy a SPL meter. You need to calibrate all of the speaker levels on your system, and calibrate the subwoofer at least +4 db above the levels for the other speakers. You can also use the SPL meter to measure how much the bass response varies on your system. Peaks and valleys in the lower frequency response curve are typically created by the room acoustics. The only ways around this are to reposition the subwoofer, install room treatments such as corner bass traps, and/or parametric equalization.

    With a 15" sub, you should be able to create very deep bass in a typical room. Keep in mind also that a lot of movie theaters pump the subwoofer levels way above where they should be. This might sound impressive because of how much it shakes you in your seat, but it's far from accurate, and is often done to mask inadequacies in the subwoofer array for a room of that size. As with the imaging coherency and tonal balance, you can obtain higher quality bass at home than all but the best showcase movie theater sound systems. Ideally, you want bass that's extended, full, and even. You don't want boomy "one note" bass.

    With your setup, you got a lot of steps that you need to go through. First and foremost, you need to level match your speakers and subwoofer. Next, you need to decide how you want the bass management on your receiver to operate -- do you want to send a full range signal to the mains and surrounds, while using the subwoofer only for the LFE track? Or do you want to crossover the bass away from the speakers and direct all of it into the subwoofer? I would guess that you will get more bass by setting the speakers to small and sending all of the bass+LFE thru the subwoofer.

    Another thing you should try is turning off the powered subs on your tower speakers (or just setting the main speakers to SMALL). It's possible that the low frequency waves emanating from the towers' subwoofers are cancelling out the 15" subwoofer at specific frequencies, which can make the overall bass sound weak.

    A lot of things to look out for, but I'm pretty sure that any deficiencies in your bass have more to do with the setup than the equipment itself.
    Wooch's Home Theater 2.0 (Pics)
    Panasonic VIERA TH-C50FD18 50" 1080p
    Paradigm Reference Studio 40, CC, and 20 v.2
    Adire Audio Rava (EQ: Behringer Feedback Destroyer DSP1124)
    Yamaha RX-A1030
    Dual CS5000 (Ortofon OM30 Super)
    Sony UBP-X800
    Sony Playstation 3 (MediaLink OS X Server)
    Sony ES SCD-C2000ES
    JVC HR-S3912U
    Directv HR44 and WVB
    Logitech Harmony 700
    iPhone 5s/iPad 3
    Linksys WES610



    The Neverending DVD/BD Collection

    Subwoofer Setup and Parametric EQ Results *Dead Link*

  8. #8
    Forum Regular
    Join Date
    May 2005
    Posts
    1,023

    It's Psychological All In Your Head

    You could have everything exactly the same in your home as a theaters, same sound system & accoustics, but psychologically it still probably wouldn't sound the same. Haven't you ever heard a song at a party or when watching a game (IE I'm So Excited) that doesn't sound the same when you're at home listening by yourself. Sounds totally different because you have a different mindset.

  9. #9
    Forum Regular Woochifer's Avatar
    Join Date
    Dec 2001
    Location
    SF Bay Area
    Posts
    6,883
    Quote Originally Posted by EdwardGein
    You could have everything exactly the same in your home as a theaters, same sound system & accoustics, but psychologically it still probably wouldn't sound the same. Haven't you ever heard a song at a party or when watching a game (IE I'm So Excited) that doesn't sound the same when you're at home listening by yourself. Sounds totally different because you have a different mindset.
    All psychological? Nope.

    Example makes no sense given that a home cannot possibly have identical acoustical conditions to a movie theater unless your home has a room as large as a typical theater auditorium and uses the same amount of acoustical controls. And even then, the acoustical conditions can NEVER be identical for the scenarios that you portray because 1) a crowded movie theater will sound different from an empty one with one person -- humans have different absorptive/reflective properties than empty seats; and 2) the soundtracks purposed for theatrical exhibition and for home use might sound very different.

    Sure, we will hear things differently under different conditions. But, the reality is that home theater systems are designed differently from theatrical systems, the alignments (and therefore the imaging) differ, the room dimensions and acoustical properties differ, and the soundtracks differ. With all of these uncontrolled variables and clearly measurable variations in the acoustical properties of large rooms versus small-to-medium sized rooms and crowded rooms versus empty rooms, it's impossible for perceived audible differences to be completely "psychological" and "all in your head."
    Wooch's Home Theater 2.0 (Pics)
    Panasonic VIERA TH-C50FD18 50" 1080p
    Paradigm Reference Studio 40, CC, and 20 v.2
    Adire Audio Rava (EQ: Behringer Feedback Destroyer DSP1124)
    Yamaha RX-A1030
    Dual CS5000 (Ortofon OM30 Super)
    Sony UBP-X800
    Sony Playstation 3 (MediaLink OS X Server)
    Sony ES SCD-C2000ES
    JVC HR-S3912U
    Directv HR44 and WVB
    Logitech Harmony 700
    iPhone 5s/iPad 3
    Linksys WES610



    The Neverending DVD/BD Collection

    Subwoofer Setup and Parametric EQ Results *Dead Link*

  10. #10
    test the blind blindly emorphien's Avatar
    Join Date
    Jan 2006
    Location
    Rochester, NY
    Posts
    919
    Quote Originally Posted by Cal Blacksmith
    Ah the downfall of a Mismatched system. To get the same sound quality of a movie theater, (my sound is much better) you need to MOVE AIR and LOTS OF IT. A powered sub in the range of 1000w or more in the average size room should start to get you feeling some of the lower registers. However, the sub needs to be matched to your speakers so there is a seamless handoff from the speakers to the sub. The best speakers in the world will sound like crap if you drive them with crap so you need to get a good pre pro to drive them with. As a start, you will be looking at a mid line or better name brand receiver. Yamaha, Onkyo, Dennon, Pioneer etc. If the MSRP of the receiver is less than $500, the unit might be suspect, then again, this is assuming that you have purchased quality speakers. A base price for speakers might start at MSRP of $700 per pair.
    well that gave me the giggles!

  11. #11
    Suspended
    Join Date
    Oct 2005
    Posts
    928
    Is it only the bass you feel isn't like a theater? I would think with the BP7006's bipolar design you would have possible imaging problems. Bipolars are OK for the rear, except maybe for DVD-Audio or SACD, but in front I'd think they would confuse the directional cues of the source material. I know for two-channel they're supposed to provide "air" or other ambience, but do you really want that in the front?

  12. #12
    Forum Regular
    Join Date
    Mar 2006
    Posts
    51
    I'm new to all this, but there is something to be said about the acoustics of the threatre itself. You can have the exact same equipment, but you don't have a room designed with optimal sound in mind.

  13. #13
    Horn lover
    Join Date
    Mar 2006
    Location
    S Cal
    Posts
    35

    Red face

    A note in my defense, I was giving a MINIMUM starting point, by no means an end all, be all system. I noted room placement was important as well as room treatments. I also pointed out that his equipment should have been able to get the sound he was asking for. The comment about the sub came from a mistake I made on the definitive website and looked at the construction of thehttp://www.definitivetech.com/images...-Breakthru.jpg
    insted of his bp7006.

    Too many people try to get high quality sound from bottom line equipment and wonder why it isn't working for them. All I was trying to do was get people to set their sights a bit higher. If that brought amusement to some of you, well I am glad I was able to brighten your day.

  14. #14
    test the blind blindly emorphien's Avatar
    Join Date
    Jan 2006
    Location
    Rochester, NY
    Posts
    919
    I imagine with the prices of modern home audio components at the lower/entry level end (which by no means means "bad" components) you could get an experience as fulfilling as most theaters (and better than many) for less than $3000 these days that would satisfy most people but perhaps not audiophiles.

  15. #15
    M.P.S.E /AES/SMPTE member Sir Terrence the Terrible's Avatar
    Join Date
    Jul 2002
    Posts
    6,826
    Quote Originally Posted by Cal Blacksmith
    A note in my defense, I was giving a MINIMUM starting point, by no means an end all, be all system. I noted room placement was important as well as room treatments. I also pointed out that his equipment should have been able to get the sound he was asking for. The comment about the sub came from a mistake I made on the definitive website and looked at the construction of thehttp://www.definitivetech.com/images...-Breakthru.jpg
    insted of his bp7006.
    Well, room treatments and bipolar speakers do not make good bedfellows. The bipolar design interacts with the walls of the room to create a larger image than what is possible with a monopolar speakers. If room treatments are put in the wrong place, it defeats the purpose of the design, and can change its frequency response as well.

    Too many people try to get high quality sound from bottom line equipment and wonder why it isn't working for them. All I was trying to do was get people to set their sights a bit higher. If that brought amusement to some of you, well I am glad I was able to brighten your day.
    I agree with your point here, but quality equipment does not necessarily have to carry a high price.
    Sir Terrence

    Titan Reference 3D 1080p projector
    200" SI Black Diamond II screen
    Oppo BDP-103D
    Datastat RS20I audio/video processor 12.4 audio setup
    9 Onkyo M-5099 power amp
    9 Onkyo M-510 power amp
    9 Onkyo M-508 power amp
    6 custom CAL amps for subs
    3 custom 3 way horn DSP hybrid monitors
    18 custom 3 way horn DSP hybrid surround/ceiling speakers
    2 custom 15" sealed FFEC servo subs
    4 custom 15" H-PAS FFEC servo subs
    THX Style Baffle wall

  16. #16
    Loving This kexodusc's Avatar
    Join Date
    Nov 2003
    Location
    Department of Heuristics and Research on Material Applications
    Posts
    9,025
    Quote Originally Posted by emorphien
    I imagine with the prices of modern home audio components at the lower/entry level end (which by no means means "bad" components) you could get an experience as fulfilling as most theaters (and better than many) for less than $3000 these days that would satisfy most people but perhaps not audiophiles.
    I'd agree with this. I've heard systems that outperform many modern theaters put together for under $2000. I think most decent brand names entry level offerings are on par with a lot of theaters. I've heard some HTIB's in smaller rooms that were convincing enough as well.
    I'm sure if you hit the used market you could do much better than that. One of the nice things about home theater is the advantages reasonably sized rooms present. Below 225 sq ft, which is mid-sized by most standards, and you don't need huge speakers and big wattage.

  17. #17
    Horn lover
    Join Date
    Mar 2006
    Location
    S Cal
    Posts
    35
    Quote Originally Posted by Sir Terrence the Terrible
    Well, room treatments and bipolar speakers do not make good bedfellows. The bipolar design interacts with the walls of the room to create a larger image than what is possible with a monopolar speakers. If room treatments are put in the wrong place, it defeats the purpose of the design, and can change its frequency response as well.



    I agree with your point here, but quality equipment does not necessarily have to carry a high price.

    I agree, price does not determine quality though I did not consider the prices I mentioned to be all that high. I would expect to spend at least as much as I mentioned to get a system that starts to sound good.

    I suppose it is all-relative. On the other audio board I post to, Klipsch, the bottom of the line Heritage speakers start at $1500/pr new. There is a large savings if you buy them used and refurbish the crossovers, at least back to the factory specs if not upgrading them. I believe that much of the sound that some people don’t like about Klipsch Heritage speakers comes from the old caps, which have drifted from spec value and thus have the crossover points wrong.

    My tastes run to the Heritage line “monopole speakers” over the reference line and my HT is made from mid level units from that line and my 2 ch rig is from the upper end of the line. Certainly, room treatments to change the room nodes help a lot to even out the presentation with monopole speakers. The placement of Heritage speakers makes a huge difference, sometimes only an inch or two in placement will result in a positive or negative change in the sound.

    When I first came to this board (lurking mode) I saw a few posts that were in the nature of “How do I get great sound with my HTIB I bought at Target?” and I apologize if I miss-read the level of sound quality that many (not all by ANY means) of the people here are used to. There is no disrespect for that level of audio sophistication by me, as my parents, sister and brother-in-law are in that group. Though they can clearly hear the difference of my systems to theirs, they don’t feel the expense is worth it for the way they listen. We each need to evaluate what our desires are and be content with where we are. The fact remains though that many people will buy lower quality components at a “big box” store and expect much more out of them than they can deliver.

    As to the “Overkill” rating of the sub, my ht has a modest 250-watt unit that serves us well. It is adjusted to reference levels and it blends with the powerful bass that I get from my speakers only adding an additional “thump” to the bottom register. However, a 1000-watt unit will only reproduce cleanly 6 db louder than our unit and some people want to FEEL more bass than we do. Nothing sounds worse than overdriving a speaker with clipped power to make it produce more db than it is capable of doing cleanly. If you have a little extra overhead, nothing is harmed, if you don’t have it and you push the system to a level that is beyond what it can reasonably perform to, you get bad sound.

    After re-reading my first post, it comes across to me now as harsh and I apologize to the board for its abrasiveness.

  18. #18
    Loving This kexodusc's Avatar
    Join Date
    Nov 2003
    Location
    Department of Heuristics and Research on Material Applications
    Posts
    9,025
    Quote Originally Posted by Cal Blacksmith
    I suppose it is all-relative. On the other audio board I post to, Klipsch, the bottom of the line Heritage speakers start at $1500/pr new. There is a large savings if you buy them used and refurbish the crossovers, at least back to the factory specs if not upgrading them.
    Hi Cal,

    Wow, does Klipsch use low cost ceramic/electrolytic caps in their crossovers for some perceived sonic benefit? Even with excessive heat (which I can't imagine in an uber-efficient Klipsch that doesn't need much power) your basic cheapy cap should last a good 10-15 years before deviating enough that it isn't covered in crossover's tolerance range. More common in amps than speakers. Decent film caps don't deviate by even 1% over that time. Either of these should easily outlive the woofer's useful life. Interesting stuff!!!

    Quote Originally Posted by Cal Blacksmith
    I believe that much of the sound that some people don’t like about Klipsch Heritage speakers comes from the old caps, which have drifted from spec value and thus have the crossover points wrong.
    Different strokes for different folks, I think. One of my very favorite speakers is the K-Horn. But I know many a hardcore audiophile that just can't stand horns for whatever reason, new or used, citing dispersion characteristics, integration with drivers, or whatever they hear as being disagreeable. Some people like planars, others can't stand them. Can't please all the people all of the time. Just a matter of finding what works for you I guess.

    Quote Originally Posted by Cal Blacksmith
    As to the “Overkill” rating of the sub, my ht has a modest 250-watt unit that serves us well. It is adjusted to reference levels and it blends with the powerful bass that I get from my speakers only adding an additional “thump” to the bottom register. However, a 1000-watt unit will only reproduce cleanly 6 db louder than our unit and some people want to FEEL more bass than we do. Nothing sounds worse than overdriving a speaker with clipped power to make it produce more db than it is capable of doing cleanly. If you have a little extra overhead, nothing is harmed, if you don’t have it and you push the system to a level that is beyond what it can reasonably perform to, you get bad sound.
    You're probably fine with 250 watts. A lot of these modern high watt subs are compensating for the somewhat low sensitivity of the woofers that use huge voice coils, big motors, and ridiculous amounts of xmax to displace large volumes of air, paying no attention to the deteriorating sound quality. It's really become a horsepower race, with sound quality getting lost in frenzy.

    The best subs I've heard are all well below 1000 watts, and have no trouble topping the 110 -115 dB mark in the average room. More power is always welcome, though I'd sooner add a second woofer and keep the power constant that drive 1 woofer twice as hard.

  19. #19
    Horn lover
    Join Date
    Mar 2006
    Location
    S Cal
    Posts
    35
    Quote Originally Posted by kexodusc
    Hi Cal,

    Wow, does Klipsch use low cost ceramic/electrolytic caps in their crossovers for some perceived sonic benefit? Even with excessive heat (which I can't imagine in an uber-efficient Klipsch that doesn't need much power) your basic cheapy cap should last a good 10-15 years before deviating enough that it isn't covered in crossover's tolerance range. More common in amps than speakers. Decent film caps don't deviate by even 1% over that time. Either of these should easily outlive the woofer's useful life. Interesting stuff!!!

    Different strokes for different folks, I think. One of my very favorite speakers is the K-Horn. But I know many a hardcore audiophile that just can't stand horns for whatever reason, new or used, citing dispersion characteristics, integration with drivers, or whatever they hear as being disagreeable. Some people like planars, others can't stand them. Can't please all the people all of the time. Just a matter of finding what works for you I guess.



    You're probably fine with 250 watts. A lot of these modern high watt subs are compensating for the somewhat low sensitivity of the woofers that use huge voice coils, big motors, and ridiculous amounts of xmax to displace large volumes of air, paying no attention to the deteriorating sound quality. It's really become a horsepower race, with sound quality getting lost in frenzy.

    The best subs I've heard are all well below 1000 watts, and have no trouble topping the 110 -115 dB mark in the average room. More power is always welcome, though I'd sooner add a second woofer and keep the power constant that drive 1 woofer twice as hard.
    No, they used oil filled motor run caps in the Heritage line, they do indeed drift over time and as a large part of the speakers out there are older than 1990 (that is 16 years ) and can go back to the late 1940s without having been looked at, the need to re-hab them becomes apparent. The latest set of Khorns talked about on the board were a SPOTLESS pair from 1959, Not a scratch, or plant water mark on them. The grills were even pristine, showing the good care these speakers receive and how hard it might be to tell them from newer units if you don't know what to look for. I think many HARD CORERS out there, if presented with a blind listening to a properly running pair of Khorns on tubes, would love them. There is a big TABOO against horns in the AudioPhool ranks (yes I count myself there also ) PK was a big one for "good enough" components. If he could get 99% of what he was looking for with 10% of the price, he went with it.


    I do have a secrete love for the planar speakers also; I think many “horn heads” like them too though they do require HUGE amounts of power compared to Klipsch

    Good point on the Sub thought, a second, well placed unit will indeed make a big difference.

  20. #20
    Forum Regular
    Join Date
    Feb 2004
    Location
    Chicagoland area (Streamwood, IL)
    Posts
    489
    abulgan, as others have said, nothing is wrong with your receiver and speakers- i actually really enjoy definitive speakers and your set-up can definitely sound amazing! as the other posters said, try adjusting the set-up of your system- be sure the speakers are all set to a similar level with a SPL meter and play around with your sub so you get it just right- i had to adjust my sub a few times before the crossover at the level i liked it.

    fyi, i have some older mirage speakers (frx series) and spent less that $600 on the fronts, center, and surrounds- i enjoy it much more than the theater! aside from the sound, i enjoy not dealing with other people talking or getting up in front of me or not being able to find a seat

  21. #21
    Forum Regular
    Join Date
    Mar 2006
    Posts
    90
    thanks guys

    i've just ordered a SPL meter from RadioShack,but analog one is better than Digital?whatever,i adjust everything again,also disable all EQ and Tone setting on receiver to get natural sound the real sound
    but is there software or something like that,ex.connect a mic(my receiver has one )to your pc or laptop to measure room's acoustic,size vs. like an Analyzer

  22. #22
    Forum Regular paul_pci's Avatar
    Join Date
    Mar 2004
    Posts
    1,246
    With the analog spl meter you can see the levels peak, whereas with the digital you can't really see that. Given that the meter is designed to measure volume, so that you can level match all speakers at the same volume (75db), then you should run the test tones with the attenidng eq and tone controls that you'd normally listen to. Do you have a test disk? A receivers internal test tones aren't ideal for this purpose.

  23. #23
    Mutant from table 9
    Join Date
    Mar 2005
    Posts
    1,205
    I have the digital RS SPL meter. I actually perfer it. Its display is easier to read and it responds to level shifts and peaks quick enough for me.

    www.rivesaudio.com has a test CD specifically designed for the RadioShack meter. The website also provides nice instructions. Also, lots of good how-to and calibration articles on www.audioholics.com

    Take the time and have fun with it, because as the others have suggested, when your done, your system should easily better any movie theater.

  24. #24
    Forum Regular
    Join Date
    Mar 2006
    Posts
    90
    yes i have two Test discs,one AIVA(or somethıng like that)and other one is DVE
    but when adjustin' or leveling DB s of Speakers,the receivers volume should be at ???what???
    mine has volume -80 to +20db i think

    also i disable Tone and EQ to natural sound(flat sound)

  25. #25
    Forum Regular paul_pci's Avatar
    Join Date
    Mar 2004
    Posts
    1,246
    Quote Originally Posted by abulgan
    yes i have two Test discs,one AIVA(or someth?ng like that)and other one is DVE
    but when adjustin' or leveling DB s of Speakers,the receivers volume should be at ???what???
    mine has volume -80 to +20db i think

    also i disable Tone and EQ to natural sound(flat sound)
    the specific volume # will vary from receiver to receiver, but you want to get a 75db reading on the speakers. Usually, you use the main L/R speakers as the reference point. That is, crank up the volume to the test tones from DVE register 75db on the L/R and then get the readings from the remaining speakers and adjust each channel's volume until they all register 75db. Then you put the receiver's volume back to typical listening position.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •