Results 1 to 13 of 13
  1. #1
    Da Dragonball Kid L.J.'s Avatar
    Join Date
    Aug 2005
    Location
    Posted in da cut
    Posts
    3,577

    Speaker Break In

    Quote from Energy Speaker Manual.(I'll shorten it up a little)

    "We strongly advise that U resist to play your speakers to their full capabilities until they have been proper broken in. This process should last about 50 hrs and can be aheived by playing a cd with a wide dynamic range repeatedly."

    1. How seriously should I be taking this advice? I'm about half way there and my wife is ready to kill me.(Due to listening to the same cd over and over)

    2. Does this appy to all size woofers or more towards my sub? My towers(Energy C-9) has 61/2 in. woofers.

    3. If I stop the break in at the half way mark I'm at now will my speakers eventually get there with normal use?(I'm sure this advise is in the manual for a good reason, I'm just wondering if it's a little too extreme.)

    4. If this process is a must is there any particular disc or cd I should use to speed this up?

    5. Will doing no break in at all leave speakers in a state of never acheiving their true potential.


    If anyone has any experience on this subject I would appreciate the advice. I'm ready to get down to some serious listening but this advise has me a little cautious. I want to hear the full potential of what my speakers have to offer.

  2. #2
    Da Dragonball Kid L.J.'s Avatar
    Join Date
    Aug 2005
    Location
    Posted in da cut
    Posts
    3,577
    That's what I started doing after the death treats started. Thanks

  3. #3
    Suspended markw's Avatar
    Join Date
    Dec 2001
    Location
    Noo Joisey. Youse got a problem wit dat?
    Posts
    4,659

    Just play your speakers at reasonable levels for the first day or so.

    Nature will take it's natural course. Play whatever music you want. If you played the same CD over and over in my house, I'd have to clock ya, too.

  4. #4
    Loving This kexodusc's Avatar
    Join Date
    Nov 2003
    Location
    Department of Heuristics and Research on Material Applications
    Posts
    9,025
    Quote Originally Posted by L.J.
    Quote from Energy Speaker Manual.(I'll shorten it up a little)

    "We strongly advise that U resist to play your speakers to their full capabilities until they have been proper broken in. This process should last about 50 hrs and can be aheived by playing a cd with a wide dynamic range repeatedly."

    1. How seriously should I be taking this advice? I'm about half way there and my wife is ready to kill me.(Due to listening to the same cd over and over)
    Don't sweat it...go ahead an play what you want, the way you intended to when you bought them.


    2. Does this appy to all size woofers or more towards my sub? My towers(Energy C-9) has 61/2 in. woofers.
    Woofers may loosen up a bit if they are stiff from the factory. Electrically, no break-in should be required. My very recent experience with measuring some of my own speakers in the lab was that break-in is a real phenomenon, but it happens much faster than 50 or 100 hours.

    3. If I stop the break in at the half way mark I'm at now will my speakers eventually get there with normal use?(I'm sure this advise is in the manual for a good reason, I'm just wondering if it's a little too extreme.)
    Yes, in fact, your speakers might already be there. The 50 Hr recommendation is made just as much with the intent of breaking YOU in to the speakers as it is to get the speakers up to snuff. That way you don't make fast judgements and return them at the dealer's expense...

    4. If this process is a must is there any particular disc or cd I should use to speed this up?
    Nope anything you want. To err on the side caution just don't crank them to the max volume for the first several hours, sounds like your already past that point.

    5. Will doing no break in at all leave speakers in a state of never acheiving their true potential.
    No...there's no detriment. It's kind of like a baseball glove. It's a bit stiff at first, but normal use will loosen it up. 50 hours is waaaay too much in my opinion, but you never know...go ahead and enjoy your new speakers!!!

  5. #5
    DIY Dude poneal's Avatar
    Join Date
    Sep 2003
    Location
    TX, USA
    Posts
    677

    Break-in is really only needed

    when your measuring a new drivers' Theile Small Paramters. As these parameters change after breakin, most recommend 3-4 hours of playing before measuring these parameters. For music, you probably will not hear a great difference. Thus, 3-4 hours is usually all thats needed.

  6. #6
    Loving This kexodusc's Avatar
    Join Date
    Nov 2003
    Location
    Department of Heuristics and Research on Material Applications
    Posts
    9,025
    Hi Paul...that's exactly what I found...Fs on 2 drivers fell several Hz after just a few hours of listening. Unfortunately I didn't think in advance to keep track of how much playing time they had. Doh....Might be a good thing to record from now on...

  7. #7
    Da Dragonball Kid L.J.'s Avatar
    Join Date
    Aug 2005
    Location
    Posted in da cut
    Posts
    3,577
    Thanks for the replies. I'm in about 25 hrs and I listen to music daily anyways. No joke, I played the same cd(with lots of bass and mid)over and over for about two days, all day. Saving Private Ryan here I come.

  8. #8
    Audio Hobbyist Since 1969 Glen B's Avatar
    Join Date
    Dec 2001
    Location
    New York
    Posts
    517
    Quote Originally Posted by L.J.
    1. How seriously should I be taking this advice? I'm about half way there and my wife is ready to kill me.(Due to listening to the same cd over and over)
    For the duration of the break-in, put the speakers to face each other about 6 - 12 inches apart and connect one of the speakers out of phase (i.e., reverse the + and - wires going to one speaker). The opposing sounds will cancel out, greatly reducing the overall volume level.

  9. #9
    Forum Regular
    Join Date
    Mar 2003
    Location
    halifax,nova scotia,canada
    Posts
    1,083
    i have owned 3 pair of jm labs speakers plus a couple of centers and found that none really found their voice until they reached at least 125 hours of use

    thanks
    bill

  10. #10
    Da Dragonball Kid L.J.'s Avatar
    Join Date
    Aug 2005
    Location
    Posted in da cut
    Posts
    3,577
    I'll get there soon enough I guess. I listen to alot of music so I'm sure it'll go by fast. For the time being everything sounds great. Thanks for the reply

  11. #11
    Suspended markw's Avatar
    Join Date
    Dec 2001
    Location
    Noo Joisey. Youse got a problem wit dat?
    Posts
    4,659

    This is encouraging.

    Quote Originally Posted by L.J.
    ... For the time being everything sounds great...
    Glad to hear it. I'm sure you will continue to be pleased.

    Too many people are disappointed with the sound of heir new speakers and expect the break in period to magicaly change them into something they like. ...and the tooth fairy will leave enough money to pay for their kids orthodontist..

  12. #12
    Da Dragonball Kid L.J.'s Avatar
    Join Date
    Aug 2005
    Location
    Posted in da cut
    Posts
    3,577
    Quote Originally Posted by markw
    Glad to hear it. I'm sure you will continue to be pleased.

    Too many people are disappointed with the sound of heir new speakers and expect the break in period to magicaly change them into something they like. ...and the tooth fairy will leave enough money to pay for their kids orthodontist..


    Actually my sub(Energy S12.3) sounded awful for the first few hours but then I guess it loosened up because the BOOOOOM came in.

  13. #13
    Suspended markw's Avatar
    Join Date
    Dec 2001
    Location
    Noo Joisey. Youse got a problem wit dat?
    Posts
    4,659

    Some manufacturers specify several hundred hours.

    Woofers (and subs) may take a little loosening of the surrounds but the time it takes is sometimes greatly overstated. As you yourself saw, a few hours is more than enough.

    And, I doubt you had to dance naked under a full moon to accomplish that.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 13
    Last Post: 10-14-2013, 08:44 AM
  2. Buying PSB? Read This!
    By IAmCanadian in forum Speakers
    Replies: 66
    Last Post: 09-08-2008, 05:55 AM
  3. bi-wiring
    By sleeper_red in forum Cables
    Replies: 35
    Last Post: 12-19-2004, 02:47 PM
  4. RGA Reviews Page 3 - yes still more.
    By RGA in forum Speakers
    Replies: 30
    Last Post: 09-11-2004, 05:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •