Results 1 to 3 of 3
  1. #1
    AR Newbie Registered Member
    Join Date
    Oct 2005

    Sony STRDA3000ES A/V Receiver - Crackling

    Hey all,
    I'm new here. I checked the previous threads and didn't seem to find anything on this, so I figured I'd give it a shot. Here's the problem:
    I'm pretty sure everything is set up correctly, and everything checks out ok (ohms, wattage, etc.) but the optical coaxial TV/SAT input has loud crackling and static intermittantly coming out of the speakers. When this happens, the only way to get it to stop is to adjust the input mode until it goes through all the input options and finally getting back to the optical coaxial setting again. And sometimes it takes three or four cycles of doing this before the problem is corrected. Additionally, sometimes the static will go away at this point, but the subwoofer seems to be receiving and putting out a signal that is not uniform with the sount onput from the cable box. Does this problem sound familiar to anyone? I know there has been some issues with these receivers, but I'm not sure that this is the same sort of deal. I'm pulling my hair out on this one. Anyone have any advice? It's greatly appreciated, and thanks for reading.


  2. #2
    Forum Regular PAT.P's Avatar
    Join Date
    Oct 2004
    ont ,canada
    Patriarca You might get answer if none here at mainly forum for Sony. Pat

  3. #3
    Forum Regular
    Join Date
    May 2005

    HAD same problem

    Rceiver is known for this problem, when they work they are very good.
    my solution eas to return and buy another brand\.ed

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts