Results 1 to 3 of 3
  1. #1
    AR Newbie Registered Member
    Join Date
    Apr 2015
    Posts
    2

    Question on how to connect 5.1.2 to my Yamaha RX-A2040 receiver

    I'm having problems connecting my overhead speakers for dolby atmos. I downloaded the firmware for the dolby atmos. I have the configuration setup with 7 channel + 1 zone.When I try to configure it it doesn't give me the option to have the front presence speakers set to overhead? Any help would be appreciated.
    Last edited by tbnsr; 04-19-2015 at 02:53 PM.

  2. #2
    Suspended
    Join Date
    Mar 2002
    Location
    St. Louis, MO, USA
    Posts
    10,176
    This new Atmos I don't know much about but the Yamaha receivers I've helped set up seem to make you choose between a 2nd zone or the extra front high surround. So I suspect you need to go into your set up menu and designate from 2nd zone to whatever the other choice is for surround.

    They don't give you enough channels for everything so you have to pick how you want to use the last 2 channels, either 2nd zone or extra surround channels. Yamaha's manuals aren't the easiest to understand but if you aren't able to find this option Yamaha is usually good about answering email inquiries.

  3. #3
    AR Newbie Registered Member
    Join Date
    Apr 2015
    Posts
    2
    Thanks for the advice. I have tried all of that I will send Yamaha an email.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •