Results 1 to 12 of 12
  1. #1
    Forum Regular
    Join Date
    Jan 2005
    Posts
    9

    best way to get speaker wire to rears?

    vaulted ceiling to so i cant go through attic
    along the wall that i can run wires there is a doorway, and a sliding glass door to get around.
    do you run the wires by the baseboard molding and then around the border of doorway etc?
    how are they covered so theyre out of sight?

  2. #2
    asdf bjornb17's Avatar
    Join Date
    Jan 2005
    Location
    El Paso, Texas
    Posts
    459
    i have a small gap under the baseboards that you cant see because the carpet, and i run my wires under them. When people come over, they ask me if my equipment is wireless because you cant see a single cable anywhere, it just looks like speakers sitting there not connected.

    In my old house, i didnt have that luxury, so i used those little wire clamps you can nail into the wall and ran them along the bassboards, and then around the doorframe. its time consumning but it doesnt look all that bad, especially if you can find white speaker wire and clamps to blend in.

  3. #3
    Forum Regular
    Join Date
    Apr 2004
    Posts
    911
    All I do as my system is in my apartment living room is run all the speaker wires which are stapled on the edge of the rooms floor amd then over the door of my apartment where they're stapled and then in back of the couch as the back speakers are on the 2 end tables by the sofa. No wire in site unless you want to count the wire than borders the doors creases.


    Quote Originally Posted by HTenthusiast
    vaulted ceiling to so i cant go through attic
    along the wall that i can run wires there is a doorway, and a sliding glass door to get around.
    do you run the wires by the baseboard molding and then around the border of doorway etc?
    how are they covered so theyre out of sight?

  4. #4
    Forum Regular
    Join Date
    Dec 2004
    Posts
    221
    You can always drill a hole in the floor and run them between the joists in your basement. A lot of times there will be a hole in the floor anyhow where the Cable TV comes in. Then add a hole near your surround speakers, and hopefully you can hide the wires in the baseboards or behind a couch.

    Otherwise if drilling holes in the floor isn't an option, the baseboards usually do the trick. The key if you don't have carpeting is to try to match the color of the wires to the floor and baseboards. They should be very hard to see.

  5. #5
    Forum Regular
    Join Date
    Jan 2005
    Posts
    9
    im in FL, no basemenet, hehe.

    not sure if i can squeeze anything under the baseboards, theyre installed quite low and the carpet is brand new.

    found these monster cable clamps ill probably use those. anyone else have them?

  6. #6
    Forum Regular cyberpac9's Avatar
    Join Date
    Feb 2005
    Posts
    37
    we have a TV mounted from the ceiling in our breakfast area and needed to run cable and power cord down the wall and to the outlets....we used clamps exaclty like that.....we purchased white extension cord and white coax to blend in....as far as those clamps exactly, i went to wal-mart and purchased my clamps...got a 50 pack for like $1 or $2....i can only assume Monster brand is more expensive and they are exactly the same.....but they work wonders and hide things very well. good luck!

  7. #7
    BooBs are elitist jerks shokhead's Avatar
    Join Date
    Dec 2004
    Location
    Cal
    Posts
    1,994
    Under the house for my rears and i just add a throw rug when needed to go over the wires.
    Look & Listen

  8. #8
    Forum Regular
    Join Date
    Dec 2001
    Posts
    414
    the simple way to do this ( especially with new carpet ) is to tuck the cable between the baseboard and the carpet. When you get to the doorway unwind a wire coat hanger, push one end of it thru the gap between the baseboard and carpet to the other side of doorway. Use some electrical tape to connect your speaker wire to it, then pull it back to the other side.
    You could also buy fishtape from local hardware store and fish ( pull ) your wire under the carpet

  9. #9
    Forum Regular
    Join Date
    Mar 2002
    Posts
    27

    U-Clips

    I have used those a few times, but never really liked them. The nails are about 1/2" long and can be a real pecker to try to nail in. My wire liked to twist and turn inside the U as I tried to nail them up. Just my experience though. Lowe's or HD has a Adhesive Channel that comes in prefinished white that worked very well for me. You can fit a power line, speaker wire and LFE line in the Channel and it doesn't get bulky.

  10. #10
    Forum Regular
    Join Date
    Jan 2005
    Posts
    9
    Quote Originally Posted by ThreeDHomer
    Lowe's or HD has a Adhesive Channel that comes in prefinished white that worked very well for me. You can fit a power line, speaker wire and LFE line in the Channel and it doesn't get bulky.

    that sounds like a nice solution.........what department was that in? the people at HD can never find anything when i ask them.

  11. #11
    Galactic Patrol Lensman's Avatar
    Join Date
    Sep 2004
    Location
    Birmingham, AL
    Posts
    240
    Quote Originally Posted by HTenthusiast
    that sounds like a nice solution.........what department was that in? the people at HD can never find anything when i ask them.
    You can also find a variety of styles (and see pics) of them here:

    http://cableorganizer.com/surface-raceways/#A

  12. #12
    Sgt. At Arms Worf101's Avatar
    Join Date
    Nov 2003
    Location
    Troy, New York
    Posts
    4,288

    Sigh...

    Quote Originally Posted by HTenthusiast
    im in FL, no basemenet, hehe.

    not sure if i can squeeze anything under the baseboards, theyre installed quite low and the carpet is brand new.

    found these monster cable clamps ill probably use those. anyone else have them?
    Well that no basement thing knocks out how I do it. Is the house flush with the gound or is there a crawlspace you might be able to use there.

    Da Worfster

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 13
    Last Post: 10-14-2013, 08:44 AM
  2. Replies: 69
    Last Post: 02-01-2005, 11:04 AM
  3. Bi-Wiring?....Uhh....
    By Cole_Guitar in forum Speakers
    Replies: 15
    Last Post: 12-30-2004, 08:37 AM
  4. bi-wiring
    By sleeper_red in forum Cables
    Replies: 35
    Last Post: 12-19-2004, 02:47 PM
  5. RGA Reviews Page 3 - yes still more.
    By RGA in forum Speakers
    Replies: 30
    Last Post: 09-11-2004, 05:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •