My new EQ hiss's really bad,Please help?

[keithant]

Bought a AudioSource EQ 8 series 2 EQ off ebay but when i hooked it up between my Yamaha HTR-5280 Reciever and my HK Amp it has introduced alot of hiss into my once dead silent system.Anybody know what could be causing the EQ to introduce so much hiss into the system?I have removed it for now..Thanks for any help,Keith.

[sam9]

The answer is probably "No" but does the manual come with a schematic? If you can provide a url to that you might get a better level of guessing from the forum.

[JohnMichael]

Bought a AudioSource EQ 8 series 2 EQ off ebay but when i hooked it up between my Yamaha HTR-5280 Reciever and my HK Amp it has introduced alot of hiss into my once dead silent system.Anybody know what could be causing the EQ to introduce so much hiss into the system?I have removed it for now..Thanks for any help,Keith.

I have a couple of questions. Have you tried the eq in a tape loop in your Yamaha to see if it generates hiss in that way? Is the HK amp driven by a preamp output? I would hook it up in the tape loop to see if the eq has a problem or it is causing problems between the Yamaha and the HK.

[keithant]

My Yamaha has two tape input's but neither are monitor loop's like so many Reciever's nowadays,i run the main R/L Preamp output of the Yamaha into the main in of the EQ and then the main out of the EQ to the input of the HK amp.Everything works OK exept for the hissing problem.The hissing is there regardless of the volume position with just the Reciever,EQ and Amp on, and the hissing does not get louder when the volume is pushed up,i tried this with no source on just the Reciever,EQ and Amp on.Thanks..

[Sir Terrence the Terrible]

Bought a AudioSource EQ 8 series 2 EQ off ebay but when i hooked it up between my Yamaha HTR-5280 Reciever and my HK Amp it has introduced alot of hiss into my once dead silent system.Anybody know what could be causing the EQ to introduce so much hiss into the system?I have removed it for now..Thanks for any help,Keith.

Welcome to the world of cheap eq's. Audiosource uses cheap parts in their eq's which introduces hiss no matter what you do. I personally believe its the spectrum analyzer that introduces the noise, but the internal parts are also guilty. If I were you, I would ditch this eq quick, and get my hands on a MEQ-2300 by Alesis. It is whisper quiet, far more flexible(1/3 octave versus one octave), you can get them off ebay for anywhere from $50-75. Audiosource eq's are nothing more than dancing lights and cheap electronics.

[keithant]

I am looking at a BSR EQ-3000 on ebay and was wondering if they are any good?Looks like a very nice EQ,Lot's of features and good build quality.And it say's Made In Japan on the back which has to be good?Thanks..

[Sir Terrence the Terrible]

I am looking at a BSR EQ-3000 on ebay and was wondering if they are any good?Looks like a very nice EQ,Lot's of features and good build quality.And it say's Made In Japan on the back which has to be good?Thanks..

Stay away from these also, they suffer from the same problem as the audiosource. Dancing lights equals noise, and BSR also uses cheap parts in the innards. Look into the eq I mentioned earlier. I used them in my studio, and they worked so well that I bought some for my hometheater.

[markw]

Got rid of it 'cause of the hissssss. It seems the more glitzy they appear, the noiser they are. Bouncing lights do not good sound make.

If you really, really want an eq, take Sir T's advice and get a good one. The cheap ones all hiss like a pissed off snake.

[pelly3s]

when it comes to EQ's there isnt only three options in my opinion, Klark Teknik, BSS, or White Instruments. But at the price is probably more than most people care to be spending on an EQ. If that is too much for you than an upper end DBX peice would be great