With your permission . . as it’s you I want to reach and not passers thru, I want to keep this in the context of a forum if that can be permitted.

I manufacture a passive product based on my personal experience. For those of you who listen with traditional box speakers with surface mounted high frequency drivers, it is designed to remove early reflection from your speaker baffles. The early reflection of sound waveforms shorter in length than your speaker cabinets is mixing in at your listening position out of time with the primary signal propagated by your tweeter. This is causing a smearing of the original event as it was recorded and your system is capable of reproducing regardless of the money you have invested. More importantly, because of the money you’ve invested. What I make removes this by damping the offending area adjacent to your tweeters and absorbing this interaction. Wanna hear what’s really in those grooves and bits? Think you are? That’s what you can discover for yourself.

Some speaker manufacturers, but not all, address waveform behavior in a variety of ways to include the use of what I am making available as an aftermarket mod or by making their enclosures narrow, canting the sides, or mounting them in modules outside of the box. In effect, that’s what you would be doing with my mod. Remove early reflection and you will get more truth about your system and recordings and insight into the music you listen to. Have no fear, we’re talking better, not worse.

Thus far, I’ve fitted for Mission, Vienna Acoustic, Von Schweikert, Opera, Spendor, Harbeth, Omega single driver, Dynaudio, Merlin, VMPS planer, Epos, Meridian, Revel, Odyssey, PSB, AV 123, Acoustic Zen, and JM Lab speakers and even replaced some on a Dunlavy that came from the factory.

Things are going to be revealed more truthfully, naturally, and dimensionally in your space to include the space itself as captured by the microphones(s). There is no change to the fundamental sound of your speakers save for maybe a commonly reported improvement in tone and sweetness in your treble, which you may treasure and I respect, just the recreation of what your speakers and everything that precedes them are capable of delivering.

For those of you with the room to place your speakers in a manner to recreate proper stereo and for whom this mod is intended, this is a tiny investment for what you are going to get. This is your member rate: $29.95 per pair (so long as there isn't too much custom work involved). That's down from $49.95.

I INVITE YOU TO EXPERIENCE FOR YOURSELF.

Jim Goulding
diffractionbegone.com