Results 1 to 3 of 3
  1. #1
    Forum Regular
    Join Date
    Aug 2002
    Posts
    7

    Sub Cable -In wall

    I wired a surround sound system with inwall speakers all around. I used regular 18 guage speaker wire. I also ran this wire for the sub through the wall to the back of the room (about 40 feet) I connected RCA jacks to each end of the wire but the sub doesn't work through this connection.

    I know the wire is in good shape so I think I'm using the wrong connectors or maybe I just attached the connectors to the wire incorrectly.

    Any help would be appreciated.

  2. #2
    Jason Monette
    Join Date
    Jul 2004
    Location
    Kalamazoo Michigan
    Posts
    42
    Quote Originally Posted by csrusa77
    I wired a surround sound system with inwall speakers all around. I used regular 18 guage speaker wire. I also ran this wire for the sub through the wall to the back of the room (about 40 feet) I connected RCA jacks to each end of the wire but the sub doesn't work through this connection.

    I know the wire is in good shape so I think I'm using the wrong connectors or maybe I just attached the connectors to the wire incorrectly.

    Any help would be appreciated.
    Ok some questions.

    This wire you are speaking of, it is from your sub amp or to your sub amp? I.E. Line level, or speaker level input?

    If it is a line level, using speaker wire isn't the best choice. That said:

    First thing to try would be a continuity test with a volt meter. Try that, if you have good continuity, let me know and we will go from there.

  3. #3
    Forum Regular
    Join Date
    Aug 2002
    Posts
    7
    I posted this question again in another section and this is the reply I recieved.

    What you want to use is coaxial cable, e.g., "RG-6" coax like your cable company uses. Put the standard "F" connectors on each end and then use "F" to "RCA" converters to make the connections at the sub and receiver. Better yet, terminate each end of the coax with a RCA wall plate and then just use a regular RCA cable for the short distance. The reason you need coax is that it is "shielded" ... in other words, like RCA cables, the conductor is inside a shield and thus protected from interference. Don't buy a 40 foot RCA cable ... RG-6 is much less expensive and works just as well or better if you use high quality cable.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. S video vs component cable for non hdTV
    By IRG in forum Home Theater/Video
    Replies: 14
    Last Post: 03-21-2005, 08:10 AM
  2. surround sound setup using cable card
    By cyberpac9 in forum Home Theater/Video
    Replies: 3
    Last Post: 02-07-2005, 08:37 AM
  3. bi-wiring
    By sleeper_red in forum Cables
    Replies: 35
    Last Post: 12-19-2004, 02:47 PM
  4. Let's agree on an approach to cable sonics...
    By Monstrous Mike in forum The Audio Lab, Tweaks, Mods, DIY
    Replies: 1
    Last Post: 09-02-2004, 11:22 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •