Thinking of adding a Titanic 15 to an existing enclosure
A couple of years ago I built a DIY subwoofer with an Adire Tempest and two PR15 passives. It was their SBB4 alignment from their website. Recently I noticed that my dog had gotten to the surround on the driver bottom mounted. I did some modeling using WinISD comparing the Tempest with the Dayton DVC and the Titanic. The DVC is almost identical to the Tempest. The Titanic gives more low end response and appears to have a very flat curve down to 20hz.
When I look at the curves of all three of these, I tend to lean toward using the Titanic. Any thoughts?