Results 1 to 12 of 12
  1. #1
    Forum Regular
    Join Date
    May 2011
    Posts
    5

    Marantz Cd6003 mods

    Hello everyone
    This is my mod of cd6003
    https://picasaweb.google.com/1115854...eat=directlink
    for your opinions
    Gheorghe

  2. #2
    Forum Regular
    Join Date
    May 2009
    Location
    Home Of The Fighting Gamecocks
    Posts
    1,702
    You did such a good job it looks stock.

  3. #3
    Super Moderator Site Moderator JohnMichael's Avatar
    Join Date
    Apr 2005
    Location
    Central Ohio
    Posts
    6,307
    Did you notice the improved transformer at the back?
    JohnMichael
    Vinyl Rega Planar 2, Incognito rewire, Deepgroove subplatter, ceramic bearing, Michell Technoweight, Rega 24V motor, TTPSU, FunkFirm Achroplat platter, Michael Lim top and bottom braces, 2 Rega feet and one RDC cones. Grado Sonata, Moon 110 LP phono.
    Digital
    Sony SCD-XA5400ES SACD/cd SID mat, Marantz SA 8001
    Int. Amp Krell S-300i
    Speaker
    Monitor Audio RS6
    Cables
    AQ SPKR and AQ XLR and IC

  4. #4
    Forum Regular
    Join Date
    May 2011
    Posts
    5

    Thanks

    Thanks. Although not all of me. The next improvement will be a separate transformer for the analog stages. Capacitors Auricap to 'output. A super regulator for the 5V digital supply

  5. #5
    AR Newbie Registered Member
    Join Date
    Sep 2011
    Location
    Saint-Petersburg, Russia
    Posts
    1
    Quote Originally Posted by gheorghe View Post
    Hello everyone
    This is my mod of cd6003
    Gheorghe
    Great job! What about listeting impressions: before / after and in comparison with another gear? Also, what is the source for additional works?
    Valery

  6. #6
    Forum Regular
    Join Date
    May 2011
    Posts
    5

    cd6003 mods

    Hello valery
    The main change is the replacement of the clock, but if you try the new cd6004, you'll see that the marantz has done to improve it. At the same price as the CD6003!
    In this way you can focus on other changes. The replacement of the clock is the most expensive!
    I have the links will be useful. There is also the service manual of the cd6003.
    I can not send because I have sent a few post. If you are interested i try to send a direct message.
    If you had to get the service manual of cd6004 send me a copy because I care.
    The improvements are dramatic.
    Giorgio
    Last edited by gheorghe; 09-24-2011 at 01:11 AM.

  7. #7
    Audio Hobbyist Since 1969 Glen B's Avatar
    Join Date
    Dec 2001
    Location
    New York
    Posts
    517
    Quote Originally Posted by gheorghe View Post
    Thanks. Although not all of me. The next improvement will be a separate transformer for the analog stages. Capacitors Auricap to 'output. A super regulator for the 5V digital supply
    Fantastic work. Using V-Caps to output instead of Auricaps may step things up further. Just something to consider. You should check out diyAudio forum. You can get into very detailed and technical discussion about your mods there.

    diyAudio

  8. #8
    Forum Regular
    Join Date
    May 2011
    Posts
    5
    Thanks for the tip! Can you tell me in which thread?
    Gheorghe

  9. #9
    Audio Hobbyist Since 1969 Glen B's Avatar
    Join Date
    Dec 2001
    Location
    New York
    Posts
    517
    No specific thread. What I meant was that if you post details about your mods on diyAudio, you will get a lot of positive discussion and feedback. There are a lot of highly knowledgeable and skilled people on that forum. Nelson Pass is a regular contributor.

  10. #10
    Forum Regular
    Join Date
    Oct 2011
    Posts
    7
    Congrats! It looks a great job!

  11. #11
    Forum Regular
    Join Date
    May 2011
    Posts
    5
    Thanks to Glen B and itsoundsbetter. My next change will be to install a dedicated power supply for the DAC and use of some Black Gate capacitors in the PSU.

  12. #12
    Forum Regular
    Join Date
    Oct 2011
    Posts
    10
    Congratulation.Really great job.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •