Composite Video over CAT5

[rbenash]

I have situation where it would be highly beneficial if I could run component video over cat5 cable. My Progressive Scan DVD player is in a remote rack. I need to interconnect over about 25'. The patch panel behind the equipment rack has only 2 locations left :( I'd like to avoid tearing everything up and be able to use a single connector to get to the patch panel behind the montior.

A CAT5 solution would be great, so I looked at these:

http://www.videocapturecard.com/500021.html

or

http://www.videobalun.com/noname.html

at $35 x 6 (89 x 2) it's looking like I shoud just bite the bullet and tear the
wall up again to add another box/patch locations.

Can anyone here tell me if they have made their own conversions like the one above and what would be in the electronics if I were to make my own adapters?

I have run s-video interconnects by simply straight wiring between punch down S-Video connectors like these:

http://www.hometech.com/techwire/inserts.html#LE-40734SVW

These worked fine, and are supposed to be good up to 60', so consequently I wonder why I would need anything special to build a component video cable set. Would I be able to just wire straight through physical connections for a distance of only 25' ?

I did find this excellent resource since my original post:

http://www.epanorama.net/links/wire_av.html

So I guess I'd just like to know if anyone has built there own solution using balun -> RJ48 ->CAT5/6 _> RJ48 -> balun


Ray