CD Player saying 'no disc" after cleaning laser. [Archive] - Audio & Video Forums

PDA

View Full Version : CD Player saying 'no disc" after cleaning laser.



Phil the Fluter
06-21-2014, 03:23 PM
I've just bought a Rotel CD-991 and it frequently skipped (or at least lost sound for a moment) during playback. It did it at some point with almost every disc I tried although all discs played perfectly for 99+% of the time. Replaying a track after a skip would not produce a skip at the original skip point so I suppose the fault lay in the CD player rather than in the discs.

Being an intrepid sort, I today took the top of the case off and-cleaned the laser lens with a camera lens-brush (no fluids) and now, whenever I insert a disc, it says 'No disc'.

When I insert a CD, the tray closes and the disc rotates about 90 degrees clockwise, then pauses for a moment, then moves another 45 degrees clockwise.

The display then shows the 'No disc' message.

I've done this in a darkened room and at no stage does the laser flash.

Woe is very much me.

Can anyone help?

Hairsonfire
07-22-2014, 10:03 AM
If you haven't called Rotel yet then that is my recommendation. Sounds like touching the lens has perhaps caused a misalignment. Best of luck!

bfalls
07-22-2014, 10:23 AM
You may have a servo or motor issue. Whenever I put a disc in it spins so it an be read for title and other pertinent info. The fact your only rotates a partial rotation seems more of an issue than the laser.

mahdeen
09-16-2014, 11:52 PM
There are many good information and details so I hope you will read carefully and take more information by take a look here.