Embedding YT videos [Archive] - Audio & Video Forums

PDA

View Full Version : Embedding YT videos



3LB
01-20-2012, 03:48 PM
I went back into the archives and found posts of mine with enbedded YT videos, but I can't figure out how to do it now, and the FAQ doesn't address embedded vids. Has something changes or did I just forget how? I'm selecting the embedded url, right click/copy/paste in the text window - what am I missing?

Other websites its just so much easier.

bobsticks
01-20-2012, 04:05 PM
It might not be this website. Which code are you copying? YouTube changed their dealio up a bit; after hitting "Share" one must decide between "Embed" and "Email". The code that appears initially is not the embed code.

ForeverAutumn
01-20-2012, 07:37 PM
1. Click "share"
2. Click "embed". Embed code will open up under the "embed" button.
3. Copy embed code
4. Paste code here.

Swish
01-21-2012, 09:26 AM
<iframe width="420" height="315" src="http://www.youtube.com/embed/ZnehCBoYLbc" frameborder="0" allowfullscreen></iframe>

ForeverAutumn
01-21-2012, 01:54 PM
"I'm going to show you how to embed a You Tube video onto your blog, or more simply said, How to put a You Tube video onto your blog".

Thanks for simplifying that that Katie! LOL!

3LB
01-23-2012, 01:42 PM
1. Click "share"
2. Click "embed". Embed code will open up under the "embed" button.
3. Copy embed code
4. Paste code here.

and I get this
<!-- / message --><IFRAME src="<a href=" width=560 height=315 target="_blank" RX_Wuvya0iU?rel='0"' embed YouTube - Broadcast Yourself. (http://www.youtube.com) http:>Cheech &amp Chong Up in smoke car joke - YouTube" frameborder="0" allowfullscreen></IFRAME>

Swish
01-23-2012, 03:54 PM
<!-- / message --><IFRAME src="<a href=" width=560 height=315 target="_blank" RX_Wuvya0iU?rel='0"' embed YouTube - Broadcast Yourself. (http://www.youtube.com) http:>Cheech &amp Chong Up in smoke car joke - YouTube" frameborder="0" allowfullscreen></IFRAME>

It appears you pasted it just fine. Let me see something....

Swish
01-23-2012, 03:56 PM
1. Click "share"
2. Click "embed". Embed code will open up under the "embed" button.
3. Copy embed code
4. Paste code here.

and I get this
<!-- / message --><IFRAME src="<a href=" width=560 height=315 target="_blank" RX_Wuvya0iU?rel='0"' embed YouTube - Broadcast Yourself. (http://www.youtube.com) http:>Cheech &amp Chong Up in smoke car joke - YouTube" frameborder="0" allowfullscreen></IFRAME>

<!-- / message --><IFRAME src="<a href=" width=560 height=315 target="_blank" RX_Wuvya0iU?rel='0"' embed YouTube - Broadcast Yourself. (http://www.youtube.com) http:>Cheech &amp Chong Up in smoke car joke - YouTube" frameborder="0" allowfullscreen></IFRAME

Swish
01-23-2012, 03:57 PM
That's freakin' weird. One of the resident internet gurus can probably figure out what's going on.

Swish
01-23-2012, 04:04 PM
1. Click "share"
2. Click "embed". Embed code will open up under the "embed" button.
3. Copy embed code
4. Paste code here.

and I get this
<!-- / message --><IFRAME src="<a href=" width=560 height=315 target="_blank" RX_Wuvya0iU?rel='0"' embed YouTube - Broadcast Yourself. (http://www.youtube.com) http:>Cheech &amp Chong Up in smoke car joke - YouTube" frameborder="0" allowfullscreen></IFRAME>

Play the video and do a right click on it and choose 'Copy embed html' instead of the method you used. I chose this one because I never tire of watching Nels soloing.

<object style="height: 390px; width: 640px"><param name="movie" value="http://www.youtube.com/v/rPAbjNT7nQY?version=3&feature=player_detailpage"><param name="allowFullScreen" value="true"><param name="allowScriptAccess" value="always"><embed src="http://www.youtube.com/v/rPAbjNT7nQY?version=3&feature=player_detailpage" type="application/x-shockwave-flash" allowfullscreen="true" allowScriptAccess="always" width="640" height="360"></object>

3LB
01-24-2012, 07:16 AM
I'll give that a shot Swishy when I get home later, thanks. Funny, this came up a few years back, and I shot a PM or two Adam's way, never heard anything back, but all of a sudden, it worked one day. Now it doesn't.

Hyfi
01-24-2012, 07:49 AM
I always select the option to use Old Code

<object width="560" height="315"><param name="movie" value="http://www.youtube.com/v/FAB5fwQ66y8?version=3&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/FAB5fwQ66y8?version=3&amp;hl=en_US" type="application/x-shockwave-flash" width="560" height="315" allowscriptaccess="always" allowfullscreen="true"></embed></object>

3LB
01-24-2012, 03:45 PM
http://www.youtube.com/v/BVRYD7PZhug?version=3&feature=player_detailpage">
name="allowFullScreen" value="true"><EMBED src="<a href=" type="text/html; charset=ISO-8859-1" target="_blank" href="http://www.youtube.com" YouTube - Broadcast Yourself. http:>http://www.youtube.com/v/BVRYD7PZhug?version=3&feature=player_detailpage" type="application/x-shockwave-flash" allowfullscreen="true" allowScriptAccess="always" width="640" height="360">

and here's trying Swish's way

is there some html tag I'm missing?

3LB
01-24-2012, 03:57 PM
So, who would I contact about this? I can't send Adam a PM.

3LB
01-24-2012, 04:00 PM
I always select the option to use Old Code
that doesn't work for me either


does it have to do with my browser?

ForeverAutumn
01-24-2012, 04:31 PM
I'm not sure that this is something that Adam can help you with. Since you seem to be the only person having the problem I think it's a safe assumption that the problem has something to do with your computer and not this site.

Why can't you send Adam a PM?

Can you post the URL to the video that you're trying to imbed and let me see if I can do it? That'll help determine whether the problem is you, the site, or the video.

3LB
01-24-2012, 04:40 PM
http://www.youtube.com/v/BVRYD7PZhug?version=3&feature=player_detailpage">
name="allowFullScreen" value="true"><EMBED type="text/html; charset=ISO-8859-1" src="<a href=" target="_blank" href="http://www.youtube.com" YouTube - Broadcast Yourself. http:>http://www.youtube.com/v/BVRYD7PZhug?version=3&feature=player_detailpage" type="application/x-shockwave-flash" allowfullscreen="true" allowScriptAccess="always" width="640" height="360">

here's the URL

KRAAN live 02.04.11 - YouTube (http://youtu.be/BVRYD7PZhug)

I have no problem posting vids anywhere else

When I tried sending him a PM, it said he was not accepting PMs.

I swear, this happens every time there's an update.

ForeverAutumn
01-24-2012, 04:50 PM
<iframe width="420" height="315" src="http://www.youtube.com/embed/BVRYD7PZhug" frameborder="0" allowfullscreen></iframe>

ForeverAutumn
01-24-2012, 04:51 PM
Dude. It's you.

3LB
01-25-2012, 06:32 AM
Dude. It's you.
I doubt its my computer. Its the same computer I was using the last time I was able to post a video. I was wondering if it was something in my account, since this came up before, I inquired about it, then it got resolved. I mean, some things don't always quite work the way they should, like trying to jump from one forum to another, try to PM Adam and getting a message saying he isn't accepting PMs and so on.

I updated my browser a while back, could that be the reason? Any help is appreciated. Thanks to all who've responded so far.

Davey
01-25-2012, 08:41 AM
I updated my browser a while back, could that be the reason? Any help is appreciated. Thanks to all who've responded so far.

<iframe width="420" height="315" src="http://www.youtube.com/embed/BVRYD7PZhug" frameborder="0" allowfullscreen></iframe>

<pre><xmp><iframe width="420" height="315" src="http://www.youtube.com/embed/BVRYD7PZhug" frameborder="0" allowfullscreen></iframe></xmp></pre>

Does the code above that I pasted to display your video show up with your browser? If so, can you copy and then paste it in your reply so I know exactly what you started with, and then I can see how it is changing for you after it is parsed by the software here. For me, and others, it isn't changed at all. When you look at the bottom left of this page does it say "HTML code is ON" for you?

Swish
01-25-2012, 10:34 AM
<iframe width="420" height="315" src="http://www.youtube.com/embed/BVRYD7PZhug" frameborder="0" allowfullscreen></iframe>

<pre><xmp><iframe width="420" height="315" src="http://www.youtube.com/embed/BVRYD7PZhug" frameborder="0" allowfullscreen></iframe></xmp></pre>

Does the code above that I pasted to display your video show up with your browser? If so, can you copy and then paste it in your reply so I know exactly what you started with, and then I can see how it is changing for you after it is parsed by the software here. For me, and others, it isn't changed at all. When you look at the bottom left of this page does it say "HTML code is ON" for you?

I knew you would get this figured out quickly. I'll bet that the issue, but will wait and see.

Thanks 'guru'.

3LB
01-25-2012, 02:29 PM
<XMP><iframe width="420" height="315" src="http://www.youtube.com/embed/BVRYD7PZhug" frameborder="0" allowfullscreen></iframe></XMP>
</PRE>yes, HTML is set to ON

3LB
01-25-2012, 02:32 PM
<IFRAME height=315 src="http://www.youtube.com/embed/BVRYD7PZhug" frameBorder=0 width=420 allowfullscreen></IFRAME>



<XMP><iframe width="420" height="315" src="http://www.youtube.com/embed/BVRYD7PZhug" frameborder="0" allowfullscreen></iframe></XMP></PRE>

Does the code above that I pasted to display your video show up with your browser? If so, can you copy and then paste it in your reply so I know exactly what you started with, and then I can see how it is changing for you after it is parsed by the software here. For me, and others, it isn't changed at all. When you look at the bottom left of this page does it say "HTML code is ON" for you?

not exactly sure what you were asking, so I responded a couple of different ways, but yes, it says HTML code is ON

3LB
01-25-2012, 02:36 PM
<IFRAME height=360 src="<a href=" width=640 target="_blank" embed BVRYD7PZhug?feature='player_embedded"' YouTube - Broadcast Yourself. (http://www.youtube.com) http:>YouTube - Broadcast Yourself" frameborder="0" allowfullscreen></IFRAME>

I right clicked on that video, selected 'Copy Embed HTML', and this is how it looks

3LB
01-25-2012, 02:37 PM
I can see and play everyone elses videos, so my version of adobe player or whatever is OK, right?

Davey
01-25-2012, 04:24 PM
not exactly sure what you were asking, so I responded a couple of different ways, but yes, it says HTML code is ON


Well, it looks like the line you copied still has the tags I put around it to keep it from being interpreted as HTML, so I think you may have hit the reply button first.

But that's OK, when you are trying to embed it yourself, it comes out like below with a whole bunch of extra audioreview and youtube stuff added in ...

<xmp><IFRAME height=360 src="http://forums.audioreview.com/<a href=" width=640 target="_blank" embed BVRYD7PZhug?feature='player_embedded"' <a href="http://www.youtube.com" target="_blank">YouTube - Broadcast Yourself.</a> http:>YouTube - Broadcast Yourself" frameborder="0" allowfullscreen></IFRAME></xmp>


Whereas if I do what you just described, I get only what is expected ...

<xmp><iframe width="640" height="360" src="http://www.youtube.com/embed/BVRYD7PZhug?feature=player_embedded" frameborder="0" allowfullscreen></iframe></xmp>


So maybe you have some media application that is doing it. I doubt it's the software here. But you should be able to do what you did above with the "right click->copy embed html" and then paste it someplace to see whether it looks like the first example or the second example I have above. If it looks like the first, then your phone is doing it. If it looks like the second, then AR is doing it.

3LB
01-25-2012, 07:38 PM
<XMP><iframe width="420" height="315" src="http://www.youtube.com/embed/BVRYD7PZhug" frameborder="0" allowfullscreen></iframe></XMP></PRE>
like this?

3LB
01-25-2012, 07:38 PM
I'm doing this on my computer at home. I'm copying the line as I see it, and posting it in the text, the I hit reply, right?

Davey
01-25-2012, 08:12 PM
I'm doing this on my computer at home. I'm copying the line as I see it, and posting it in the text, the I hit reply, right?

I guess, but it looks like you must be clicking the quote button and then copying what AR gives you because I don't know how else you would get the extra tags that I put there since they don't show up in the display window of my post.

Davey
01-25-2012, 08:56 PM
I guess, but it looks like you must be clicking the quote button and then copying what AR gives you because I don't know how else you would get the extra tags that I put there since they don't show up in the display window of my post.

Oh, I see now, you are copying a little more than just that one line so it's picking up the formatting. I just wanted you to copy from the first < to the last > and nothing more, then paste that text into your reply and see what happens. Or just type it in. But yea, it's probably time to move on now :)

3LB
01-26-2012, 07:28 AM
Oh, I see now, you are copying a little more than just that one line so it's picking up the formatting. I just wanted you to copy from the first < to the last > and nothing more, then paste that text into your reply and see what happens. I'll try again when I get home. Yes, I did highlight the entire line but nothing else, just as it appears and I didn't use the quote function.

3LB
01-26-2012, 07:36 AM
<XMP><iframe width="420" height="315" src="http://www.youtube.com/embed/BVRYD7PZhug" frameborder="0" allowfullscreen></iframe></XMP><XMP>Testing, from my phone</XMP>

Davey
01-26-2012, 08:17 AM
<XMP><iframe width="420" height="315" src="http://www.youtube.com/embed/BVRYD7PZhug" frameborder="0" allowfullscreen></iframe></XMP><XMP>Testing, from my phone</XMP>

Well, I guess this was the wrong approach because you are copying the xmp tags with it when you highlight the whole line. Just quote the same message of yours that I did here and you will see the XMP tags around both the iframe line and your testing line. Only copy from iframe to iframe, don't copy the xmp tags. Then paste it and preview your post and see if the video shows up. It should unless AR is changing the code based on your account or something running on your end.

That's all I've got.

3LB
01-26-2012, 02:06 PM
which part of that line are the XMP tags?<>?

Davey
01-26-2012, 05:32 PM
which part of that line are the XMP tags?<>?

Really? It's the part that says XMP. See picture below - this is what I see when I quote your post above ...


8590

3LB
01-27-2012, 09:38 AM
As you can see in the Jim Carrol thread I ressurected, it did once work for me, using the same computer. I don't see anything that says XMP on anything you posted. I'm not sure to make of what you're seeing from my end.

3LB
01-30-2012, 05:05 PM
wow, I'm so not seeing on my home computer what I'm seeing on a different computer. I have no idea where to go now. Geez... I don't see that picture you posted at all Davy on my PC or my phone, but I do see it on another computer.

<IFRAME height=315 src="http://www.youtube.com/embed/Ws25EyTGdTg" frameBorder=0 width=420 allowfullscreen></IFRAME>

this was posted from my daughter's laptop. I see XMP tags on her computer that I don't see from my PC... or my phone for that matter

3LB
01-30-2012, 05:06 PM
I guess it is my computer. I have no idea what the problem is.