How to package a Systemsek IIX for posting [Archive] - Audio & Video Forums

PDA

View Full Version : How to package a Systemsek IIX for posting



funkytwig
08-16-2010, 10:27 AM
Hi,

I have just sold a Systemsek IIX on Ebay. I have a suitable box and more bubblewrap than you can wave a stuck at. Any advice on packaging would be appreciated.

Regards,
Ben

poppachubby
08-16-2010, 01:38 PM
To properly package it you MUST remove the platter from the plinth, and wrap it seperately. If it has a removable sub platter, that should go too.

Depending on the design of the tonearm, this should be removed also, HOWEVER, if not ensure that it's tied down to the rest position so it cannot move. Also be certain that nothing will move and hit or sit against it.

I am not sure about this table, does it have transit screws? I am quite certain that it's a suspended design, so you will need to ensure that the suspended portion is stable.

Alot of guys double box in this situation, better safe than sorry. Don't give your buyer any reason to bring something back on you. Photograph everything as you pack it, and in it's final stage before posting. Use a digital camera so the pics are time stamped.