Home Theater Sound Advice [Archive] - Audio & Video Forums

PDA

View Full Version : Home Theater Sound Advice



patrick201009
01-31-2010, 10:49 AM
Hi Everyone,

In the near future, I am going to be installing a home theater system on my main floor. I am planning on mounting a TV, but I'm not sure about surround sound. I am pretty savy when it comes to wiring, installs, etc, but I am considering other options for audio. My first problem is that the room I want to put it in is very open, and I wouldn't be able to mount speakers evenly on 2 parallel walls, and a back wall. Therefore, I really have to focus on putting speakers in the front of the room, right near the TV. I was thinking of maybe putting four small surround sound speakers on each side of my TV. Or, maybe even getting a pair of high quality monitors, that I could mount nearby. Full room surround sound is not an option...

Thanks
Patrick

Mr Peabody
01-31-2010, 12:28 PM
Not optimum but have you considered in-ceiling or in-wall to complete the surround aspect? I personally would try looking for a slim floorstanding or stand mount speaker for mains opposed to some kind of multiple speaker per channel config.

I don't know how they'd be for surround sound but take a look at Gallo speakers to see what you think. I heard them once with music and they sounded great but the sub is required. They remind me of shotputs on a stand :)

Mirage I believe have some slim cabinet speakers. Klipsch and several others make wall mountable speakers. Klipsch having small horns on the wall speaker may tend to be more directional but will play loud with small power and give a theater type sound. Klipsch may not be best if your electronics tend to bright or the open area is reflective/echoing.

pixelthis
01-31-2010, 02:16 PM
I would look into something like the def-tech pro-cinema series.
Four mini-monitors on stands, with a decent center and stands.
The surround stands would be behind the listening area.
I had a pair once, and they were quite good, and the guy I sold them to loves
them.
Any small monitors will do, just be sure they integrate with their woofer module.
I just mentioned the DEF-TECHS because they are well known for the way they integrate
with the Subs that are included in their speaker packages.
Its an all in one solution, but is generally not considered "audiophile" quality
by the cognesenti.
But there are several mini monitors out there , stand mounted, that would suit your needs
and look cool to boot.:1:

http://www.definitivetech.com/

blackraven
01-31-2010, 10:50 PM
Just do a 3.1 system (2 fronts, center and a sub), you wont be missing too much. I use a 3.1 system and got rid of my rear speakers because of too many speakers. You could also look at some wireless speakers for the rear or in ceiling/in wall speakers for the rear if you feel you must have 5.1 sound. There are even wireless subwoofers by Martin Logan.

Feanor
02-01-2010, 06:09 AM
I concur with the other folks that you ought to pursue alternatives for full surround. 3.1 is nice but can never be a substitute.

Even small speakers, not precisely matching the mains & center, will work to give you the full effect. If slim floorstanders won't work, look for in- or on-ceiling speakers, either wired, (preferably), or wireless.

blackraven
02-01-2010, 12:02 PM
If you want some slim floor standers take a look these Monitor Audio Radius.

http://www.saturdayaudio.com/picturepages/radius_closeout.htm

LMB
02-01-2010, 12:16 PM
If you want some slim floor standers take a look these Monitor Audio Radius.

http://www.saturdayaudio.com/picturepages/radius_closeout.htm

Look at Paradigm in ceiling in wall speakers or or Sonus

frankaai
08-23-2011, 03:17 AM
anybody know of any cheap slim wall speakers?

dwayne.aycock
08-23-2011, 04:45 AM
Seems to me that a little creativity is needed. You said that you were pretty good with wiring right? Do the 3.1 set up as suggested, and possibly looking at a pair of celing mount speakers like Polk or Bose. They have a simple horse shoe bracket that you can toe and tilt into your listening position. Since most rear channel audio is matrix or DPL anyway this is a low tech fix to a mono signal. What is your celing made of? If you are like me, I am better with electronics than I am with carpentry. The thought of cutting a hole in a wall or celing bothers me.