Mach 1 Woofers

[Dan2]

Hi all, I’ve just purchased a couple of realistic mach 1 woofer for a subwoofer project, does any body know the theile & small parameters for the realistic Mach 1 (4024) Woofer or could any body suggest a suitable inclosure size.

Thanks in advance.

[hydroman]

When in doubt - consider going with a sealed enclosure... It should not matter greatly - no precision required.

Check parts express for the suggested box designs (in the sub section - follow the links).

I suspect you could find a similar woofer and use it's parameters. Sub-optimized? Slightly (pardon tha' pun ;) but I would not try to 'measure with a micrometer and cut with an axe'.

Good is good enough. I apologize if this didn't help....

Good luck with the project!

[Dan2]

Thanks Hydroman