Need to know about Hz

[Hashpot]

I know Hz stands for cycles per second but how does the amount of Hz change the way a speaker sounds. I was reading a sub thread and someone was talking about how they wanted a sub with 60-120Hz how does Hs affect the sound? lets say a sub has a range of 70-160 would i get more bass?

[audio_dude]

hmm, what you're thinking of is frequency of sound...

for example, most people say the human ear can hear from 20hz to 20000hz...

the average bookshelf speaker goes down to about 60 or 70hz.

20hz is that low rumble of an explosion and such things.

when saying they wanted a sub with 60-120hz, they meant the highpass filter, which is the point where the sub stops playing and the speakers fill in.

for subs, most go down to at least 30hz, and as you progress through bigger drivers and amps, some go down to 20hz and beyond that even.

hope this helps remove some of this fog!

[Dusty Chalk]

... a sub with 60-120Hz how does Hs affect the sound? lets say a sub has a range of 70-160 would i get more bass?No, actually that would be less -- the one that goes down to 60 goes lower than the one that goes down to 70. The upper crossover just helps in blending with the regular (non-subwoofer) speakers.

[basite]

yeah, Hz is the frequency,

a piano for example, has a very wide frequency range some can go from 25 Hz to 4100 Hz (4.1 kHz)

which means that the lowest note the piano can reach is 24 hz and the highest note is 4100 Hz,


Keep them spinning,
Bert.

[Luvin Da Blues]

This may help...its from a EQ manual

Center frequency (Hz)
1/3 octave
Effects on music

31 to 63
Fundamentals of bass drum, tuba, double bass and organ.
These frequencies give music a sense of power. If overemphasised
they make the music "muddy". The 50 or
60 Hz band is also used to reject AC mains hum.

80 to 125
Fundamentals of lower tympani. Too much boost produces
excessive "boom". 100 or 125 Hz are also used for hum
rejection.

160 to 250
Drum and lower bass. Too much boost produces
excessive "boom". Also useful for 3rd harmonic mains hum
rejection.

315 to 500 Fundamentals of strings and percussion.

630 to 1k
Fundamentals and harmonics of strings, keyboards and
percussion. Boosting the 600 to 1 kHz range can make
instruments sound horn-like.

1.25k to 4k
Drums, guitar, accentuation of vocals, strings and bass.
Too much boost in the 1 to 2 kHz range can make
instuments sound tinny. Too much boost anywhere
between 1 to 4 kHz can produce "listening fatigue".

5k to 8k
Accentuation of percussion, cymbals and snare drum.
Reduction at 5 kHz makes overall sound more distant and
transparent. Reduction of tape hiss and system noise. The
1.25 to 8 kHz governs clarity and definition.

10k to 16k
Cymbals and overall brightness. Too much boost causes
sibilance. Reduction of tape hiss and system noise.