BillyB
02-03-2007, 05:33 PM
Just hooked up a new Panasonic 60U 50" plasma.I'm using an HDMI cable from my HD cable box to the display.I was under the impression that HDMI carried both the audio and video signals.I didn't have any sound so I connected RCA cables from the audio out on the box to the audio in on the display and now I have volume.
I do have a couple of issues though.My cable box remote doesn't work for volume adjustment but does work for channel change which I thought was bizarre.I'll call cable on that one but I'm thinking maybe it's my connections.
I also hooked up the analogue audio out RCA connectors on the display to a 2 channel reciever with subwoofer just to improve the sound until I set up true Home Theatre.I have sound but it's not a variable out signal so the TV remote doesn't adjust the volume on the reciever.The display manual doesn't seem to clarify if the analogue audio out jacks are variable.Tried turning off the display speakers to see if that addressed the problem but it doesn't.It seems you can only have internal speakers on or amp source being used,not both at the same time.Kind of bummed because I was going to use the surround front speakers to compliment the display speakers which are marginal at best.
The display does have an optical digital output which I imagine would be variable and intended for a true A/V reciever.This will certainly be motivation for getting the home theatre going.I was going to do it in stages but am not happy with the way this set-up is working.I put the 2 channel reciever inside a cabinet where the remote can't get to it so no variable output is a problem.I was just going to leave it on all the time at a moderate volume setting.
Anyway if anybody sees anything obvious I'm not thinking of let me know.Just normal growing pains with the new toy but never the less it is annoying.Thank goodness the picture is super with HD and very acceptable with SD.Looking forward to DVD playback once the audio issue is resolved.May just have to live with integrated speaker sound for now.
I do have a couple of issues though.My cable box remote doesn't work for volume adjustment but does work for channel change which I thought was bizarre.I'll call cable on that one but I'm thinking maybe it's my connections.
I also hooked up the analogue audio out RCA connectors on the display to a 2 channel reciever with subwoofer just to improve the sound until I set up true Home Theatre.I have sound but it's not a variable out signal so the TV remote doesn't adjust the volume on the reciever.The display manual doesn't seem to clarify if the analogue audio out jacks are variable.Tried turning off the display speakers to see if that addressed the problem but it doesn't.It seems you can only have internal speakers on or amp source being used,not both at the same time.Kind of bummed because I was going to use the surround front speakers to compliment the display speakers which are marginal at best.
The display does have an optical digital output which I imagine would be variable and intended for a true A/V reciever.This will certainly be motivation for getting the home theatre going.I was going to do it in stages but am not happy with the way this set-up is working.I put the 2 channel reciever inside a cabinet where the remote can't get to it so no variable output is a problem.I was just going to leave it on all the time at a moderate volume setting.
Anyway if anybody sees anything obvious I'm not thinking of let me know.Just normal growing pains with the new toy but never the less it is annoying.Thank goodness the picture is super with HD and very acceptable with SD.Looking forward to DVD playback once the audio issue is resolved.May just have to live with integrated speaker sound for now.