Stacked Quad ESL 57 [Archive] - Audio & Video Forums

PDA

View Full Version : Stacked Quad ESL 57



theaudiohobby
03-05-2005, 09:51 AM
I heard a pair of Quad 57 with my current amplifier and I was very impressed, I am interested these vintage speakers at home, what are the caveats that I should look at for and what the benefits of a stacked pair? Thanks in advance.

Geoffcin
03-05-2005, 11:03 AM
I heard a pair of Quad 57 with my current amplifier and I was very impressed, I am interested these vintage speakers at home, what are the caveats that I should look at for and what the benefits of a stacked pair? Thanks in advance.

The benefits of stacking are myriad. Bass, image size, dynamics, maximum uncompressed SPL, all increase X 2. I've heard a lot of speakers stacked, and I often run my speakers stacked. In my early days I stacked EPI's with KLH's, large Advents, and a friend even had two pair of DQ-10's stacked that was simply fantastic. ( I wish he still had that setup)!
I still stack speakers now. I bet not too many people have stacked Magnepan 3.6r's with Gallo Reference 3's but I can tell you that for some recordings there's just nothing like it. If you have the chance to get a quad of Quads then I would recommend it without question.

Caveats; Amplification that has the same gain. Contrary to what some people might tell you, you don't absolutely need matched amps. It would be nice, but if the amps have near the same gain, then it's not a big problem. Also, you will need a preamp with dual output. My vintage PS Audio IV preamp has this, but a lot of newer preamps don't. If yours doesn't you can always use a splitter.

theaudiohobby
03-05-2005, 02:51 PM
thanks Geoffchin, I was not aware that various speakers are used in stacked configurations.

Brian Levy
03-07-2005, 06:07 PM
Years ago the company that made the frames to stack the Quads also made a set to stack the DQ-10s. In a store that sold both lines had these set up and as much as I like electrostatics the double DQ-10 seemed the better speaker array.

theaudiohobby
03-08-2005, 07:57 AM
Years ago the company that made the frames to stack the Quads also made a set to stack the DQ-10s. In a store that sold both lines had these set up and as much as I like electrostatics the double DQ-10 seemed the better speaker array.
Interesting, why did you prefer the DQ-10, I am not familiar with the DQ-10, so I am ears, thanks.

squeegy200
03-16-2005, 05:01 PM
I am not a Quad expert. But I remember there was an advantage to stacking the electrostatic speakers. QUADs place a heavy requirement on amplifiers, not in the amount of amperage but in capacitative load. There are some very technical user groups specific to the QUADs.

The Dahlquists have an interesting history. Briefly, Roger Dahlquist built a pair of speakers using dynamic conventional drivers in a phased array setup. He was so impressed with the QUADs that he decided to imitate them using conventional drivers. His crossover network and his "Phased Array" setup mimiced the QUADs in appearance as well as sound. Interestingly, he was also working on an electrostatic version which never made it to the public.

Stacking DQ10s was a popular practice in the 80s -- again to mimic the Quads but there was no significant advantage other than creating a "Wall of sound" They looked impressive stacked but I suspect there was probably some cancellation and overlapping frequencies in the arramgement.

I love my DQ-10s. I've admired them since my first experience with them back in 1982. Only recently have I been able to own a pair. And had to refurbish them back into operation but I've not got a functional pair of totally stock DQ-10s.

But again, I am no expert. So my opinion is only worth the $.02 entry fee.

squeegy200
03-17-2005, 02:22 PM
I posed this question to some Quad owners on the advantages of stacking ESLs

The purpose was to increase overall square footage of the driver panels themselves. Since the drivers were so linear and the response approaching theoretical, often the sound would be characterized as lacking bass response. Stacking ESLs did not have the inherant cancellation nodes often evident with conventional speakers. Usual practice dictated two additional amplifiers to drive the additional pair.

The results would be 6db increase in lower frequency response and 3db increase in mids and hi tones.

InfinityApogee
09-30-2005, 03:48 PM
Nice thing about stacking is you can create a good line source, note you can series them or parlell them to useable ohmage on one amp.:)

Brian Levy
10-01-2005, 04:02 AM
The ESLs even in stacked mode was too limited in the bass and high end. In comparison to my KLH Nine full range electrostatics. The DQ10 while not having the magic midrange of the ESL had better extension. I listen to a fair bit of organ music and the ESL can not handle it. The later ESL 63 does a far better job than the ESL. If vocals and mainstream classical is your flavor, the ESL (or stacked) would be the better because of the magical midrange.

JoeE SP9
10-21-2005, 05:37 AM
Years ago one of the hottest setups was the Mark Levinson HQD system. It consisted of 2 pair of Quad ESL57's stacked in custom stands, a pair of Decca ribbon tweeters and one or two Hartly subwoofers. I heard one of those setups once and came away very impressed. Of course Levinson gear drove the whole shebang. Stacked ESL57's with a suitable subwoofer should sound very good. You must be careful of overdriving the 57's because the protection circuitry is hell on some amps when it kicks in. The 57's should not be driven by amplifiers that produce more than 100 Watts. You would still need a very good subwoofer. The Quads are so transparent that they will show everything that's bad with your gear. Some like them more than the newer Quad designs.http://forums.audioreview.com/images/icons/icon6.gif

Data
01-05-2006, 10:22 AM
Hello all, i'm building my own HQD system from Mark Levinson , Now i'm searching for the drawings or tech specs of the wooden frame in which the esl's and decca's are mounted , ist there any body here who can help me with that ???

E-Stat
01-05-2006, 07:05 PM
The Dahlquists have an interesting history. Briefly, Roger Dahlquist built a pair of speakers ...
Roger? That would be Jon Dahlquist. And they are exceptional speakers that coincidentally use the Advent woofer. I sold them back in the late 70s. Not a big fan of the piezo super tweeter though.

As for stacking them (I have stacked New Advents in the vintage garage system), you pick up 6 db sensitivity.

rw

jtgofish
02-24-2006, 02:34 PM
Roger? That would be Jon Dahlquist. And they are exceptional speakers that coincidentally use the Advent woofer. I sold them back in the late 70s. Not a big fan of the piezo super tweeter though.

As for stacking them (I have stacked New Advents in the vintage garage system), you pick up 6 db sensitivity.

rw

The stacked Quads are OK but an awful lot of bother for little improvement.I really think these are overated speakers.I have Crown ES212s that are hugely better in every way and even something like the Martin Logan Clarity is better.

JT

theaudiohobby
02-24-2006, 03:51 PM
The stacked Quads are OK but an awful lot of bother for little improvement.I really think these are overated speakers.I have Crown ES212s that are hugely better in every way and even something like the Martin Logan Clarity is better.

JT

Beauty is in the eye of the beholder, I compared a 30 year old Quad ESL to one of the Martin Logans hybrids a while back, in the same room and same amplifier and there was no contest, the Quad ESL was much better, the Quad was much more transparents and had a much better liveliness to it. A Quad ESL in good fettle is an extraordinary speaker, for my particular favoured genres i.e. classical, chamber, jazz, piano and such like it has few equals. The only other speaker I think of with so fondly is the Sonus Faber Guernari Homage, funny thing it has some of the same limitations of the Quads, so that should give you an idea of my preferences.

E-Stat
02-25-2006, 09:22 AM
The stacked Quads are OK but an awful lot of bother for little improvement.I really think these are overated speakers.I have Crown ES212s that are hugely better in every way and even something like the Martin Logan Clarity is better.
To each his own. I favor full range electrostats over hybrids such as both the Crown (RTR) and ML models for their coherency. The Quad 57s are indeed wonderfully neutral speakers. Stacking them provides additional efficiency, low end extension and image size.

After using various Acoustat electrostats for almost thirty years, I purchased a pair of Sound Lab U-1s last year. I find them to offer the midrange purity and coherency of the Quad with the extended bass of the hybrids along with a wider sweet spot.

rw

jtgofish
02-26-2006, 04:00 AM
To each his own. I favor full range electrostats over hybrids such as both the Crown (RTR) and ML models for their coherency. The Quad 57s are indeed wonderfully neutral speakers. Stacking them provides additional efficiency, low end extension and image size.

After using various Acoustat electrostats for almost thirty years, I purchased a pair of Sound Lab U-1s last year. I find them to offer the midrange purity and coherency of the Quad with the extended bass of the hybrids along with a wider sweet spot.

rw

E Stat,
Don't get me wrong,I do like the ESL57s.They are certainly one of the best speakers ever made.I have never heard a completely refurbished pair so maybe the ones I have heard were slightly off their best ,although they were in well above average condition and one of the last pair made.I used these for some time in the same room and system as my Crowns and I much prefer the Crowns.For a hybrid design the Crowns are very well integrated.Certainly some of the Martin Logan hybrids I have heard are not well integrated,but I think the Claritys are a well integrated model.The Crowns are just better all round speakers,are not beamy like the Quads,are much more dynamic and can handle more power.They do need a ribbon super tweeter though.The Crowns were much more expensive speakers than the Quads so they should sound better-they cost the same as a family car in 1974!

JT

theaudiohobby
02-26-2006, 07:11 AM
The Crowns are just better all round speakers,are not beamy like the Quads,are much more dynamic and can handle more power.They do need a ribbon super tweeter though.The Crowns were much more expensive speakers than the Quads so they should sound better-they cost the same as a family car in 1974!

JT

As someone who has owned 3 Quad ESL 57s in various conditions, now currently running a fully refurbished pair, I cannot agree with your assessment, First, I run the Quad ESL with a 100W amplifier and it does not complain, as for dynamics that is entirely down to amplifier, running them with medium power SET/P-Ps as is suggested is not the way to go, some of those amplifiers may clip gracefully and may make voices sound glorious and but dynamics takes a heavy knock in the process as those amplifiers run of out of puff when power most required in the lower midrange, the issue of beamy treble is more an issue of tired tweeter, EHT and/or poor positioning than any thing else, amplifier choice is also critical here since the Quad ESL deeps to under 2 ohms at the extremes, a wimpy amplifier will not produce any power here causing the speaker to sound midrange heavy. The sweet spot is wider than many reviews lead one to believe, it has limited vertical dispersion but that is limitation is common to Electrostatics, though it is excarbarated by Quads sitting on stock feet. I do not known much about the Crowns to comment.

E-Stat
02-27-2006, 06:54 PM
...it has limited vertical dispersion but that is limitation is common to Electrostatics
Not with seven foot tall 'stats like the SL U-1s. Not to mention the nine foot tall Majestics. :)

http://x1.putfile.com/9/25817475884.jpg

rw

Geoffcin
02-27-2006, 06:56 PM
http://x1.putfile.com/9/25817475884.jpg

Stacked Majestics?!

theaudiohobby
02-28-2006, 02:29 PM
Impressive wall... ;)

Florian
02-28-2006, 04:18 PM
A Apogee buddy of ours in Jamaica runs tripple Stacked Quads and used to repair them. He did say that the standard versions of the Quads are simple very limited. He replaced the foils (1/4th the thickness), stronger magnets, different frames, tripple stacked and driven by handbuild SilverKing amps (purely silver [incl. circuit traces])....spposed to be freaking good. But in the end, its not a Quad anymore ;-)

-Flo

PS: On a side note, if you stack two speakers you do not get twice the bass, clarity, or dynamics ;-)

E-Stat
03-02-2006, 11:42 AM
if you stack two speakers you do not get twice the bass, clarity, or dynamics
Not twice the dynamics (10 db), but you do typically pick up 6 db. And some low end extension.

While I agree that increasing sensitivity doesn't improve clarity per se, it does allow me to run my Threshold Stasis at reduced power levels in pure class A with my double New Advents. It is smoother that way.

rw

Florian
03-02-2006, 12:57 PM
Also, since they are stacked they create a linesource (tripple) and you get less drop off over the distance. By the way, did you ever measure your U's inroom responce?

-Flo

E-Stat
03-02-2006, 01:40 PM
By the way, did you ever measure your U's inroom responce?
No. A good bit lower, however, than the Acoustat's they replaced. They are back home in Utah now getting repaired after the clowns who shipped them skewered them with a fork lift. One of the crates was destroyed.

They worked ok for a while, but developed problems. At least, I didn't have to ship the entire 900 lb package back. The frames alone weigh 200 lbs. In April, I'm flying to Chicago to attend a meeting where I'll meet Dr. West and hear a pair of the new Majestics.

rw

Florian
03-02-2006, 06:11 PM
I think i remember seeing the picture of the shipping crate. Did you post them in the AudioAsylum?

The Apogee's are just as bad for shipping, and very critical. We had to remove the fence and get it through the window. How did you get your Soundlabs into the room? The reason i ask about the measurements is because i mesured the Maggie 3.6, Apogee Scinitlla, DIVA and the VMPS speakers and found that the Panel speakers have a almost flat responce (+-2db) exept in the bass where they have a huge output. Apogees are designed with the backwave in mind so thats easy to manage. The 3.6 has limited deep bass output but is quite weavy and with the help of a EQ can sound a lot better.

Your Soundlanbs are quite interesting, and the panel is not curved but you have a multi driver array, so i am curious how this affects the room. Maybe some day you will measure them ;-)

-Flo

E-Stat
03-03-2006, 08:36 PM
I think i remember seeing the picture of the shipping crate. Did you post them in the AudioAsylum?
That was it.


Your Soundlanbs are quite interesting, and the panel is not curved but you have a multi driver array, so i am curious how this affects the room. Maybe some day you will measure them ;-)
Your first observation is what separates them from the Martin Logan designs. Roger West argues that a truly curved diaphragm involves compromises. While the Sound Lab design looks curved, the grid creates angled flat facets. Horizontal dispersion is most unlike other electrostatic designs. Also, unlike other 'stats (like Acoustats) they do not employ multiple panels as well. The deliberately variable height grid (to control inherent resonances) is placed over a single very large diaphragm.

rw

opimax1
03-14-2006, 07:57 AM
Hi,

New member but this thread is perfect.Is this the best place to post this? I want to stack my DQ-10s. it will raise the sound stage on top of the other good points. I will ignore the bad ones until I listen then look into improving those issues. :16:

Any help on the bracket would be great. !st choice would be buy a set, second would be make a set.I will power each stack by a bridged adcom 555. :ihih:

I listen to mostly DVD concerts, CDs, tv(sports) and a rare movie

Thanks

Mark

Trevor
04-02-2006, 10:46 AM
Hi there, I am new to this forum scenario but here goes. I have a pair of 57's and 63's does any body know if it is possible to stack them or am I being daft.

JoeE SP9
04-02-2006, 01:40 PM
Hi there, I am new to this forum scenario but here goes. I have a pair of 57's and 63's does any body know if it is possible to stack them or am I being daft.

Hi, Trevor
Stacking is normally done with 2 pair of the same speakers. I suppose it could be done with ESL 63's on the bottom and the ESL 57's on the top.:cool:

frankmarsi
04-26-2006, 09:49 AM
I heard a pair of Quad 57 with my current amplifier and I was very impressed, I am interested these vintage speakers at home, what are the caveats that I should look at for and what the benefits of a stacked pair? Thanks in advance.


Hi, if it's any help to you? I run four (4) 'stacked' AR-LST's with (2) two vintage Phase Linear 400 power amps. The sound is unbelievably 'huge' sounding , with a natural-ness of sound that's excellent also. I've found that stacking speakers keeps the amps and speakers from stressing too much because their jobs are now easier with double amps and the amount of speaker radiating area being doubled. If anyone has any similar experience, I'd like to hear about it.
Thanks, Frank Marsi

vmcfer
01-12-2012, 06:39 AM
[QUOTE=Data;122488]Hello all, i'm building my own HQD system from Mark Levinson , Now i'm searching for the drawings or tech specs of the wooden frame in which the esl's and decca's are mounted , ist there any body here who can help me with that ??? Also any information regarding the crossover (which is the bass cutoff and the high cutoff), Thanks