James.ca
02-20-2005, 12:11 PM
heool
I've use common lamp cae for manyyears up lets say a 100watt amp
suffis rate for 15 amps and a 120 volts AC it's cheap and it works
.
You can lso doulbe it if you like as well and you 2 different colours of cable
.
you can als get a couple of gauges up from that gauge as well
.
I've put iron or brass finising nai lon the ends as contacts and solder them on or loop the wire and solder the loop.
Thre are aslso som multi stranded cabe brnads out as well
someting about the different size of the strand transmitting better responce out of the drivers as well
.
I go with a wire no to thick and noto thin
The thicker gauges of wire strand s can be good contacts but als caus restisance as ell
.
Thre new flat braided speker cable out now as well
If yo want to go nuts go after some silver coated cable or gold coated cable .
But to me I say 75% of the time you 20 cent a foot lamp cable is fine !!
My 2 cents on cables
james.ca
I've use common lamp cae for manyyears up lets say a 100watt amp
suffis rate for 15 amps and a 120 volts AC it's cheap and it works
.
You can lso doulbe it if you like as well and you 2 different colours of cable
.
you can als get a couple of gauges up from that gauge as well
.
I've put iron or brass finising nai lon the ends as contacts and solder them on or loop the wire and solder the loop.
Thre are aslso som multi stranded cabe brnads out as well
someting about the different size of the strand transmitting better responce out of the drivers as well
.
I go with a wire no to thick and noto thin
The thicker gauges of wire strand s can be good contacts but als caus restisance as ell
.
Thre new flat braided speker cable out now as well
If yo want to go nuts go after some silver coated cable or gold coated cable .
But to me I say 75% of the time you 20 cent a foot lamp cable is fine !!
My 2 cents on cables
james.ca