Results 1 to 4 of 4
  1. #1
    AR Newbie Registered Member
    Join Date
    Feb 2006
    Posts
    2

    Question Cartridge on Akai AP-A950 (NAD 533)

    Hello,
    I'm new to Hi-end audio and just bought Akai AP-A950 (same as NAD 533 or RegaPlanar2). I need a new cartridge for it so what would you recomend? Something about $100.
    Thanks in advance!

  2. #2
    AR Newbie Registered Member
    Join Date
    Feb 2006
    Posts
    2
    What I can get is Stanton 680 HiFi. I found only one review of this cartridge what says its ok... Any more feedbacks?
    Thanks!

  3. #3
    Super Moderator Site Moderator JohnMichael's Avatar
    Join Date
    Apr 2005
    Location
    Central Ohio
    Posts
    6,307
    Quote Originally Posted by Groozdas
    Hello,
    I'm new to Hi-end audio and just bought Akai AP-A950 (same as NAD 533 or RegaPlanar2). I need a new cartridge for it so what would you recomend? Something about $100.
    Thanks in advance!
    In my Rega Planar 2 I am using the Ortofon OM 20 with good success. The OM 10 is available for around $99 and later you can upgrade it with a stylus change to an OM 20 or 30. I have also used an Audio Technica 440 ML with good results discounted to $99. I have never had much luck with Grado's in that table and not just because of the hum problem.
    JohnMichael
    Vinyl Rega Planar 2, Incognito rewire, Deepgroove subplatter, ceramic bearing, Michell Technoweight, Rega 24V motor, TTPSU, FunkFirm Achroplat platter, Michael Lim top and bottom braces, 2 Rega feet and one RDC cones. Grado Sonata, Moon 110 LP phono.
    Digital
    Sony SCD-XA5400ES SACD/cd SID mat, Marantz SA 8001
    Int. Amp Krell S-300i
    Speaker
    Monitor Audio RS6
    Cables
    AQ SPKR and AQ XLR and IC

  4. #4
    Mutant from table 9
    Join Date
    Mar 2005
    Posts
    1,205
    A Rega/Nad clone by Akai? What country are you in? John Michael's advise is very good. I've tried the carts he listed and still have the AT 144, but I found the higher priced Goldrings more pleasing.

    Try this site: http://www.needledoctor.com/s.nl/sc.2/category.402/.f

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •