Results 1 to 12 of 12
  1. #1
    Retro Modernist 02audionoob's Avatar
    Join Date
    Jun 2008
    Location
    Dallas, TX
    Posts
    2,908

    Buzzing motor - MMF-5

    Anyone here ever have any trouble with one of those little motors you see in a Music Hall, Pro-Ject or Rega turntable? Mine buzzes when it gets hot and I'm looking around to see if anyone has ever solved that.

  2. #2
    Vinyl Fundamentalist Forums Moderator poppachubby's Avatar
    Join Date
    Aug 2009
    Location
    Analog Synagogue
    Posts
    4,363
    Quote Originally Posted by 02audionoob
    Anyone here ever have any trouble with one of those little motors you see in a Music Hall, Pro-Ject or Rega turntable? Mine buzzes when it gets hot and I'm looking around to see if anyone has ever solved that.
    you talking about a buzz that can be heard externally or through the stylus? BTW I know nothing that could help you, sorry man. I hope it's not something serious, real shame man...

  3. #3
    Retro Modernist 02audionoob's Avatar
    Join Date
    Jun 2008
    Location
    Dallas, TX
    Posts
    2,908
    I mean the motor itself makes the noise. Maybe it's more of a whine than a buzz. The motor is pretty simple...a magnet spinning in a steel case that splits open in half. The noise happens usually only after it has been running a long time...probably 2 hours or more...long enough to get hot to the touch.


  4. #4
    _ Luvin Da Blues's Avatar
    Join Date
    Jan 2007
    Location
    _
    Posts
    1,951
    Sounds like a bearing problem to me.
    Back in my day, we had nine planets.

  5. #5
    Vinyl Fundamentalist Forums Moderator poppachubby's Avatar
    Join Date
    Aug 2009
    Location
    Analog Synagogue
    Posts
    4,363
    If you can gain access to the bearing, photograph it noob, I would like to see. If it's not sealed you can probably get away with a bit of penetrating oil for now. I assume you've inspected it for anything that might be loose and grinding...with moving parts heat means friction. It seems unlikely that a quality bearing (that we assume Music Hall have used) would not be able to handle the load of a platter infinitely.

    The best solution would be to somehow watch the motor in action, anyway possible?

  6. #6
    Retro Modernist 02audionoob's Avatar
    Join Date
    Jun 2008
    Location
    Dallas, TX
    Posts
    2,908
    Quote Originally Posted by poppachubby
    If you can gain access to the bearing, photograph it noob, I would like to see.
    That's it in my previous reply. The only moving part is that round magnet on the left.

  7. #7
    Vinyl Fundamentalist Forums Moderator poppachubby's Avatar
    Join Date
    Aug 2009
    Location
    Analog Synagogue
    Posts
    4,363
    hhmmmmmmmmmm....have you got some super tough penetrating oil? With a rag, absorb a small amout and rub any areas that are moving. Give that a test run...

  8. #8
    Retro Modernist 02audionoob's Avatar
    Join Date
    Jun 2008
    Location
    Dallas, TX
    Posts
    2,908
    I put about 8 drops of sewing machine oil in the bottom half and put it back together. I figure surface tension of the oil will draw it up around the bearings. It's on a test run at the moment. If I resort to the penetrating oil I'll need to go out and buy some.

  9. #9
    Do What? jrhymeammo's Avatar
    Join Date
    Jan 2005
    Posts
    3,276
    I hope your TT motor is okay and is nothing serious.
    I would contact MH about the motor overheating.

    Assuming MH and PJ TT assembly is basically the same, I have a few questions.

    Have you removed the motor mount screws?
    Are you using a correct 16v power supply?
    Have you inspected your belt and the spindle platter?
    Perhaps the self-lubricating motor has run dry. You may want to use a drop of synthetic motor oil as MH suggests.

    Good luck and best wishes,
    JRA

  10. #10
    Retro Modernist 02audionoob's Avatar
    Join Date
    Jun 2008
    Location
    Dallas, TX
    Posts
    2,908
    I don't know if the amount of heat would qualify as overheating or not. It's not scorching hot...just sort of hot. There's a fairly thick plastic shell above the motor and I've removed that. Plastic seems like too good of an insulator to have there if I'm having heat issues.


    I might contact MH if the problem continues, but I'm afraid the answer there might just be to buy a new turntable. I'd buy a new motor from Needle Doctor if it came already attached to a power cord. I haven't asked them if it does, but I'd guess it doesn't. The soldering looks a little intricate...beyond my skill level.


    To answer your questions...the motor mount screws are in place. The power setup is original to the turntable...no outboard transformer. The belt and spindle check out good.


    And then to answer a question with a question...What do they mean by "self-lubricating"? Does that mean the bearings do or don't need oil? Or that they shouldn't need maintenance with additional oil later? In the manual...at that comment about adding oil...it seems like they're talking about the platter bearing rather than the motor bearings. Do you think they mean the motor?


    In any case, I'm guessing they didn't mean to crack it open like I did. But it's been running continuously since I put the oil in...certainly more than a drop...and it has been quiet.


  11. #11
    Do What? jrhymeammo's Avatar
    Join Date
    Jan 2005
    Posts
    3,276
    Quote Originally Posted by 02audionoob

    To answer your questions...the motor mount screws are in place. The power setup is original to the turntable...no outboard transformer. The belt and spindle check out good.


    And then to answer a question with a question...What do they mean by "self-lubricating"?



    Arent the mounting screws meant to be removed? If they are same as the PJ deck, I was under the impression that mounting screws need to be removed to suspend/isolate motor vibration from the deck. And also to allow the motor to spin freely as it was designed. Have you always had screws in place? If so, the mounting screws may have applied too much downforce stress onto the motor assembly.


    As for "self-lubricating" I have no idea. Some motors and spindles are designed to pump oil back to contact surface to minimize possible wear.

  12. #12
    Retro Modernist 02audionoob's Avatar
    Join Date
    Jun 2008
    Location
    Dallas, TX
    Posts
    2,908
    Quote Originally Posted by jrhymeammo
    Arent the mounting screws meant to be removed? If they are same as the PJ deck, I was under the impression that mounting screws need to be removed to suspend/isolate motor vibration from the deck. And also to allow the motor to spin freely as it was designed. Have you always had screws in place? If so, the mounting screws may have applied too much downforce stress onto the motor assembly.
    I thought you meant the screws on the flanges of the motor, which are in place and are required to hold the motor on the bottom deck. As for those screws that hold the top deck to the bottom deck...yes...they are intended to be removed and I have removed them. They go in those brass threaded holes you can see in the photo. The hole in the top deck is much larger than the motor, so it wouldn't appear to apply any unusual pressure if the screws were in place, but of course the screws would defeat the purpose of the decoupled plinth.

    At this point, I think cracking it open and putting several drops of sewing machine oil in the bottom solved it, although I wonder if that oil will congeal someday.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •