Results 1 to 10 of 10
  1. #1
    Forum Regular
    Join Date
    Sep 2006
    Posts
    262

    changing the power cord on Nad 3020i

    I've been quite surprised for awhile that the power cord on the Nad is like that of a table lamp! A very thin wire. I'm considering doing a cable replacement. What kind of wire should I be using as I would have to open up the amp and solder the new wire. Would this help improve the performance of the amp?

  2. #2
    Forum Regular blackraven's Avatar
    Join Date
    Nov 2006
    Location
    St. Paul, Minnesota
    Posts
    5,421
    Tony, there are going to be people here that disagree with me but I doubt that you will hear any significant improvement at all especially if the rest of your system is not extremely detailed. In my reference system I have not heard any difference in changing power cords. But I am not using $500 and up power cords. And I am using a $9,000
    preamp and a $6,000 amp.

    I have some Van Alstine gear that uses lamp cord type power cords. Van Alstine switched to IEC and heavier gauge power cords due to customer pressure and they have not noticed any difference in sound.

    If you want to build your own cord, take a look here-

    DIY Belden 83803 Mains Power Cable - Audiophile Power Cord
    Last edited by blackraven; 12-29-2014 at 08:53 AM.
    Pass Labs X250 amp, BAT Vk-51se Preamp,
    Thorens TD-145 TT, Bellari phono preamp, Nagaoka MP-200 Cartridge
    Magnepan QR1.6 speakers
    Luxman DA-06 DAC
    Van Alstine Ultra Plus Hybrid Tube DAC
    Dual Martin Logan Original Dynamo Subs
    Parasound A21 amp
    Vintage Luxman T-110 tuner
    Magnepan MMG's, Grant Fidelity DAC-11, Class D CDA254 amp
    Monitor Audio S1 speakers, PSB B6 speakers
    Vintage Technic's Integrated amp
    Music Hall 25.2 CDP
    Adcom GFR 700 AVR
    Cables- Cardas, Silnote, BJC
    Velodyne CHT 8 sub

  3. #3
    Super Moderator Site Moderator JohnMichael's Avatar
    Join Date
    Apr 2005
    Location
    Central Ohio
    Posts
    6,307
    I would not open a piece of equipment just to use a different power cord. Often time you will hear a difference but is it an improvement? I would not do it and I have tried power cords with previous electronics.
    JohnMichael
    Vinyl Rega Planar 2, Incognito rewire, Deepgroove subplatter, ceramic bearing, Michell Technoweight, Rega 24V motor, TTPSU, FunkFirm Achroplat platter, Michael Lim top and bottom braces, 2 Rega feet and one RDC cones. Grado Sonata, Moon 110 LP phono.
    Digital
    Sony SCD-XA5400ES SACD/cd SID mat, Marantz SA 8001
    Int. Amp Krell S-300i
    Speaker
    Monitor Audio RS6
    Cables
    AQ SPKR and AQ XLR and IC

  4. #4
    Shostakovich fan Feanor's Avatar
    Join Date
    Jun 2002
    Location
    London, Ontario
    Posts
    8,127
    Quote Originally Posted by blackraven View Post
    Tony, there are going to be people here that disagree with me but I doubt that you will hear any significant improvement at all especially if the rest of your system is not extremely detailed. In my reference system I have not heard any difference in changing power cords. But I am not using $500 and up power cords. And I am using a $9,000
    preamp and a $6,000 amp.

    I have some Van Alstine gear that uses lamp cord type power cords. Van Alstine switched to IEC and heavier gauge power cords due to customer pressure and they have not noticed any difference in sound.

    If you want to build your own cord, take a look here-

    DIY Belden 83803 Mains Power Cable - Audiophile Power Cord
    The problem with Belden 83803 cable is that it is extremely stiff.

  5. #5
    Forum Regular
    Join Date
    Sep 2006
    Posts
    262
    Thanks guys, I'm a laymen in the subject of current/electricity. But since an amplifier would need a good source of current coming in, would a thin wire limit the amount of current required by the amp? did Nad install such thin wire would u think on their 3020 line or since I bought it used, the previous owner might have changed it.

  6. #6
    Forum Regular blackraven's Avatar
    Join Date
    Nov 2006
    Location
    St. Paul, Minnesota
    Posts
    5,421
    Quote Originally Posted by tony340 View Post
    Thanks guys, I'm a laymen in the subject of current/electricity. But since an amplifier would need a good source of current coming in, would a thin wire limit the amount of current required by the amp? did Nad install such thin wire would u think on their 3020 line or since I bought it used, the previous owner might have changed it.
    I would not worry about it. Like I said AVA HiFi use to have cheap lamp cord power cords on all their gear, including a 500wpc amp. NAD knows what it is doing.
    Pass Labs X250 amp, BAT Vk-51se Preamp,
    Thorens TD-145 TT, Bellari phono preamp, Nagaoka MP-200 Cartridge
    Magnepan QR1.6 speakers
    Luxman DA-06 DAC
    Van Alstine Ultra Plus Hybrid Tube DAC
    Dual Martin Logan Original Dynamo Subs
    Parasound A21 amp
    Vintage Luxman T-110 tuner
    Magnepan MMG's, Grant Fidelity DAC-11, Class D CDA254 amp
    Monitor Audio S1 speakers, PSB B6 speakers
    Vintage Technic's Integrated amp
    Music Hall 25.2 CDP
    Adcom GFR 700 AVR
    Cables- Cardas, Silnote, BJC
    Velodyne CHT 8 sub

  7. #7
    Suspended
    Join Date
    Oct 2005
    Posts
    928
    Since the power cord is on the primary side of the transformer chances are it won't make a difference. The voltage is then stepped down to the different voltages to supply what is needed for the circuit boards. I'm sure the NAD engineers knew what the were doing during the design phase.

    Run the amp awhile and check the cord to see if it is warm. If the gage of the wire isn't sufficient it will be. This is why house fires start when you draw more current than the wire can handle. It gets hot, the insulation breaks down and the conductors touch causing a spark inside the walls (don't overload your electrical circuits). It's why you have circuit breakers and fuses rated for currents the wire can handle.

  8. #8
    Forum Regular
    Join Date
    Sep 2006
    Posts
    262
    Thanks all, really appreciate ur input always. I did check the wire, absolutely No heating while playing for hours, like BR said, Nad knew what they were doing. Cheers and happy 2015 to u all.

  9. #9
    AR Newbie Registered Member
    Join Date
    Jan 2015
    Posts
    1
    You might also look at the Ifi DAC which is about double the price of Emo but sounds good and has a lot of features including DSD.

    Whether you need an amp depends on how you are currently driving her HSU speakers.
    Our excellent online certkiller training programs will lead you to success in the testking exam. We also offer latestccnp route final exam - testking passguide and examsheets.a+com with 100% success guarantee.a+ - testking ur selftestengine is rare in IT world.

  10. #10
    Audio Hobbyist Since 1969 Glen B's Avatar
    Join Date
    Dec 2001
    Location
    New York
    Posts
    517
    Quote Originally Posted by tony340 View Post
    I've been quite surprised for awhile that the power cord on the Nad is like that of a table lamp! A very thin wire. I'm considering doing a cable replacement. What kind of wire should I be using as I would have to open up the amp and solder the new wire. Would this help improve the performance of the amp?
    I am with the others who say don't waste your time. The minimum power cord size would be 18 gauge which has a current rating of 7 amps (840W). You amp maximum power consumption is 140W. As you can see, the power cord reserve rating is plenty. The amp internal wiring is probably 20 or even 22 gauge wire.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •