Just bought a vintage Luxman M-111 power amp from ebay without user manual.
The specs of this beast as following:
"Can be operated in 4, 3, or 2 channel operation via bridging capabilities for each stereo pair,
25 Watts RMS x 4 from 20Hz – 20Khz into 8 ohms, THD <= 0.05%, Bridged – 75 Watts RMS x 2 (short term, 1 Khz, 8 ohm)"
Since I don't really use 4 speakers, I definitely love the 75wx2 set up than 25x2 :-) However,
I never bridged amp before. Does the following sound correct:

C - output channel of the amp
L - left
R - right
<---> - wire

LSpeaker(+) <---> C1:L(+) C1:L(-) <---> C2:L(+) C2:L(-) <---> LSpeaker(-)
RSpeaker(+) <---> C1:R(+) C1:R(-) <---> C2:R(+) C2:R(-) <---> RSpeaker(+)

If not, please advise.

Thanks in advance,

-fred-